Chapter 2: Aircraft Handling Equipment, Nonskid, And Markings

Question 1

The A/S32A-30A is primarily designed for towing what?

Answer 1

Ground support equipment

Question 2

What is the secondary mission of the A/S32A-30A?

Answer 2

Tow small aircraft

Question 3

The A/S32A-32 towing tractor (SD-2 Spotting dolly) is controlled by the use of what?

Answer 3

Joystick

Question 4

What is the maximum towing capacity of the A/S32A-30A (support equipment & Aircraft towing tractor)

Answer 4

40,000 lbs

Question 5

What is the overall height of the A/S32A-32 (SD-2 spotting dolly)?

Answer 5

30 inches

Question 6

What is the drawbar pull of the A/S32A-32 towing tractor (SD-2 Spotting Dolly)?

Answer 6

14,000 lbs

Question 7

How many phases are there in the ground support licensing program?

Answer 7

2 phases

Question 8

Who will handle the phase two portion of the ground support licensing program?

Answer 8

Division

Question 9

Phase two of the ground support licensing program covers what?

Answer 9

On-the-job-training

Question 10

What type of material is the NWC-4 made from?

Answer 10

Polyurethane

Question 11

What is the difference between the regular TD-1B and the type used on amphibious assault ships?

Answer 11

The Length

Question 12

For specific information concerning the high power tie down assembly for each type of aircraft, you would refer to the what?

Answer 12

NAVAIR 17-1-537

Question 13

When using the NWC-4, which way should the adjustable end of the chock be placed?

Answer 13

Aft

Question 14

The TD-1B can be tightened by the use of what?

Answer 14

The tensioner assembly

Question 15

Which aircraft is the ALBAR 24 specifically designed for?

Answer 15

SH-60

Question 16

When the aircraft elevator is fully loaded to capacity, and with all pumps in use, what is the total duty cycle time?

Answer 16

60 Seconds

Question 17

The horizontal locking bars of the aircraft elevator are powered by?

Answer 17

Air (pneumatically)

Question 18

Aircraft elevator stanchions should not be operated in what mode?

Answer 18

Automatic mode

Question 19

V-1 division is responsible for what portion of elevator operation?

Answer 19

Flight deck

Question 20

V-3 division is responsible for what portion of elevator operation?

Answer 20

Hangar deck

Question 21

A division ( A gang) is responsible for what portion of elevator operation?

Answer 21

Machinery room.

Question 22

There are how many different compositions of nonskid?

Answer 22

2

Question 23

Nonskid coating kits are supplied in how many components?

Answer 23

2

Question 24

The shelf life of nonskid is?

Answer 24

1 year

Question 25

What is the preferred method of nonskid removal?

Answer 25

Water-jetting

Question 26

In order to ensure the correct primer coverage, the DTF reading must be taken when the primer has?

Answer 26

Cured

Question 27

When completing the primer application process, what will allow corrosion to set in and degrade the process?

Answer 27

Holiday

Question 28

VLA markings on the hangar deck are placed how high on the bulkhead?

Answer 28

14 feet