C9 - Network Policy & Access Services Flashcards
RRAS stands for?
Routing and Remote Access Services
RRAS is part of what role?
Network Policy and Access Services
RRAS can provide a relay agent for what protocol?
DHCP
Point-to-Point and Layer 2 are called ____________ protocols.
tunneling
____________ are responsible for sending packets between different networks.
Routers
To see the routing tables on a PC, enter ______________.
route print
The default route on a PC has a destination address of ______________.
0.0.0.0
The network mask is the same thing as the _________ mask.
subnet
What routing protocol does Microsoft use?
RIP 2
VPN stands for ______________.
Virtual Private Network
Which tunneling protocol was developed by Microsoft and Cisco?
L2TP
Which tunneling protocol is very weak and should only be used in testing?
PPTP
Which tunneling protocol provides encryption?
SSTP
NAT stands for _______________.
Network Address Translation
The function of NAT is to ____________ internal IP addresses from outside networks.
hide
The ________________ role is used to create and enforce network access policies.
Network Policy Server
An industry-standard protocol that provides authentication for remote and wireless devices.
RADIUS
A remote clicent must negotiate with a server before signing on using a(n) __________ protocol.
authentication
A common authentication protocol supported by Server 2008 is _______________.
MSCHAPv2
Wireless access points use the ___________ standard.
802.11
What wireless standards run at 54MHz?
802.11b and 82.11g
The DHCP Relay Agent can run on a PC at a remote location? T/F
FALSE
To make a routing entry permanent, use the -perm parameter. T/F
FALSE
RRAS is recommended for very small networks and/or testing. T/F
TRUE
