C5 Flashcards
The person with the authority to sign tag/lables to be issued or cleared is the __ __
Authorizing Officer
Authorizing Officer is designated by the ___ ___
Commanding Officer
___ ___ Tag is Yellow, Uswed to provide temporary special instructions, or to indicate an unusal sitiuation.
Caution Tag
A ___ ___ is not to be used if personel or equipment can be endangered while using normal operating procedures.
Caution Tag
___ ___ is red
Danger Tag
___ __ Prohibits operation of equipment that could jeopardize safty of personnel or equipment.
Danger Tag
Laminated Danger Tags, _____, are authorized only for designated PMS.
intended for repeated use
Out of Calibration Lables are ___
Orange
Ships requiring 2 tag out logs.
WHEC, WMEC, WAGB
Format of Tag out Log
A copy of the AUTHORIZED OFFICERS letter(s) shall be included.
DANGER/CAUTION TAG-OUT Index and Record of Audit Sheet.
ACTIVE Log. The Active section of the log shall include all Tag-Out Record
Sheets for systems that are tagged out at the present time.
INACTIVE Log. The Inactive section of the log shall contain all the Tag-Out
Record Sheets from Tag-Outs that have been cleared.
INSTRUMENT Log. Labels associated with OUT-OF-COMMISSION and OUT-
OF-CALIBRATION instruments are logged in the instrument log. Figure 8, shows
a sample log.
Tags and lables are available in the ____ ____ ___
Federal Supply System
The ____ _____ is ultimately responsible for the safety of all maintenance
personnel and for protection of the cutter’s equipment
Commanding Officer
____ ____ ____ tags shall be removed immediately when the
situation requiring the tag-outs has been corrected.
DANGER and CAUTION
No tags shall be cleared without the approval of the ___ ____. The
Authorizing Officer’s approval will be annotated on the Tag-Out Record Sheet.
Authorizing Officer.
When any component has multiple tags, any ____ tag takes precedence over all
other tags. All ____ tags must be removed in accordance with this procedure before
the equipment is operationally tested or operated.
DANGER
