C1 Practical Test Flashcards
Show me how you would check that all doors including cargo doors are secure.
All doors must be closed and locking levers for cargo doors are set in the recommended
secured position.
Show me how you would check for air leaks on this vehicle.
Charge the air tanks, consult gauges for drops in air pressure. Walk round the vehicle listening for
any obvious leaks.
Tell me the main safety factors involved in loading this vehicle.
Evenly distribute the load along the length of the vehicle.
Items should be secured. Heavy items at the bottom, lighter items on top.
Cargo should not exceed the size and weight limits of the vehicle.
Check loading against Vosa plate in the cab.
The load should be secure so it does not affect driving control and endanger other road users.
Tell me how you would check the condition of the reflectors on this vehicle.
Check they are fitted appropriately, clean, and functional (not cracked or broken).
Tell me how you would check the condition of the windscreen and windows on this vehicle.
Check they are clean, free from cracks or defects.
There should be no mascots or stickers restricting view of the driver.
Show me how you would check the condition of the mudguards on this vehicle.
With a walk around check ensure mudguards are and spray suppression equipment are secure.
Ensure they are not in contact with the wheel.
Tell me how you would check your tyres to ensure that they are correctly inflated, have sufficient
tread depth and that their general condition is safe to use on the road.
Always follow the manufacturers instruction.
Check the tyre pressures when they are cold.
Tread depth should be 1mm across 3/4 of the breadth of the tread, continuous around the entire tyre circumference.
Ensure there are no punctures, bulges or other visible damage to the tyre.
There should be no debris trapped under the wheel arch.
Tell me how you would check the condition of the windscreen wipers on this vehicle.
Operate them to ensure functionality.
Blades should be in good condition without splits or tears and glide smoothly across the windshield.
Tell me how you would check the condition of the body is safe on this vehicle.
Walk around the vehicle.
Check for loose panels or equipment, all should be fitted securely.
No sharp objects.
Can check underneath chassis is bolted up against the body.
This prevents endangering other road users.
Show me how you would check for the correct air pressure on this vehicle.
Check air pressure gauges are correct for the vehicle.
Ensure no warning lights or audible warning sounds are present.
Identify where you would check the engine oil level and tell me how you would check that the
engine has sufficient oil.
Dipstick oil test, always on a level surface with the engine cold.
Remove dipstick, wipe it, dip again and check level of oil against the minimum and maximum markers.
Show me how you would check the wheel nuts are secure on this vehicle.
A visual check to identify any obvious loose wheel nuts. Ensure they are butted up against the wheel.
Could check wheel nut indicators are aligned if they are fitted.
Check for signs of rust or wear.
Can tap them to make sure they dont make rattle noises.
Show me how you would check the operation (specify horn, warning device for reversing) of the
audible warning devices on this vehicle.
Demonstrate use of the horn.
Reverse safely and listen for audible warning devices functionality.
Tell me how you would check the condition of the suspension on this vehicle.
Walk around visual check, check for signs of deterioration or damage.
Ensure the vehicle is level and not leaning to one side.
Show me how you would check that the brake lights are working on this vehicle (I can assist you,
if you need to switch the ignition on, please don’t start the engine).
Operate the brake pedal, use reflections from glass or windows.
Consider asking someone to help.
