Bundle Branch Blocks (Johnston) Flashcards
Impulse traveling TOWARDS the electrode produces what kind of deflection
- positive (R wave)
- Area of stimulated muscle completely depends on what electrode (what lead you are looking from)
Impulse traveling AWAY from the electrode produces what kind of deflection
- Negative (S wave)
- Area of stimulated muscle completely depends on what electrode (what lead you are looking from)
In normal ventricular conduction, what is the origin of a small q wave in V5 and V6
- Normally, heart is activated at the LEFT side of the ventricular septum then the RV and then finally the Left Ventricle
- So if electrode is on left side of LV, then impulse will travel AWAY (Left TO right), causing a negative deflection (seen as negative q wave) first. After left side of septum and right ventricle is depolarized, the left ventricle is activated so impulse is now traveling TOWARDS the electrode (R to L) so you see a POSITIVE R wave
- If there is a bundle branch block on the left, the left side of septum cannot be activated first so the q wave is lost
- If electrode was placed on the opposite side (Right), would see opposite reaction (would see positive q wave)
Sequence of normal ventricular muscle depolarization
- LEFT Septal surface activated 0.1 sec BEFORE RIGHT
- Septum activated from Left TO Right
- Right wall is thinner than L wall, therefore the impulse activates the epicardium of the RV before the LV
- Finally the LV epicardial surface is activated from the apex to the base
Bundle branch blocks are characterized by
- wide QRS complexes–time lapse from beginning of QRS to peak of R wave is 3 small squares or more (but not always)
- Width of QRS represents the time it takes to activate the epicardial surface of heart
- Bundle branch block and hypertrophy, it takes longer time to activate epicardial surface leading to a wide QRS complex
Intrinsic Deflection is
- time lapse from beginning of QRS to peak of R wave
- Time that lapses from beginning of QRS complex to peak of R wave is measured horizontally
V1 vs V6 time when impulse reaches the epicardial surface of ventricle (width of QRS complex)
V1: 0.2 sec
V6: 0.04 sec
-time difference is because impulse reaches RIGHT side of the heart (V1) before LEFT side since the right ventricular wall is THINNER
-If it takes longer for the ID to start downward, it means impulse is late in reaching the epicardial surface
Late ID is seen in
- Bundle branch block
- Hypertrophy/dilated
Common features of BBB
- Wide QRS complex (0.12 sec or greater)
- ST segment-T waves slope off in opposite direction to QRS
Which side of the septum is activated first in RBBB
-Left side because nothing is changed on the left side
In RBBB why is there an S wave (AFTER R wave) in V6?
- Because impulse cannot get to the right ventricle (After septal activation, activation begins in LV free wall instead of right)
- Since V6 (and V5) is on the LEFT side of the LV, and in a RBBB impulse cannot reach the right ventricle (goes to left ventricle first-R wave because TOWARDS). Impulse eventually reaches the right (AWAY from electrode) leading to negative deflection (S wave)
Hallmark of RBBB
- R-S-R’ morphology in V1
- ST segment of T wave go in OPPOSITE direction of the polarity of the QRS complex
In lead V1, why is there a small r wave morphology in RBB?
-Whichever conduction fascicle is blocked, that ventricle will be activated last so if you have RBBB, then RV is activated last
Hallmark of LBBB
-R-R’ morphology
RBB seen in which leads?
-Leads I, V1 and V6