Building Coverings

Question 1

two types of structural wood panel products

Answer 1

1. plywood
2. oriented strand board (OSB)

Question 2

is a vertical structural system that supports gravity loads from the roof and floors above in transfers the loads to the foundation below

Answer 2

wall

Question 3

a typical wood-framed wall is composed of the following elements

Answer 3

studs
cup plates
sole plates
girt plates
wall sheathing
post
braces
wood-framed partition

Question 4

are connected to the cap plates into the girt plates

Answer 4

studs

Question 5

are connected to the upper end of the vertical studs

Answer 5

cap plates

Question 6

are connected to the vertical studs and to the posts

Answer 6

girt plates

Question 7

is the covering of wall system

Answer 7

wall sheathing

Question 8

are connected to the girt plates into the horizontal studs

Answer 8

post s

Question 9

serve to stiffen the studs and the sides of the building

Answer 9

braces

Question 10

used to divide the house or building into several rooms

Answer 10

wood-framed partition

Question 11

frame openings and support loads from a header

Answer 11

king and jack studs

Question 12

our place above or below a wall opening and are not full height

Answer 12

cripple studs

Question 13

materials that covers the wall of the building

Answer 13

walling

Question 14

materials such as for walling

Answer 14

masonry
lumber
plywood
G.I sheets
pressed board
bamboo
nipa leaves

Question 15

is the outer and inner covering of the wall attached to the stud

Answer 15

double walling

Question 16

materials of double walling

Answer 16

plywood
lawanit
stuccoand
plaster

Question 17

support gravity loads from either the roof, ceiling, or floor joist or the beams above

Answer 17

load-bearing walls

Question 18

support both axial and lateral loads

Answer 18

exterior load-bearing wall

Question 19

is a horizontal structural system composed primarily joist, girders, bridging, sheathing

Answer 19

wood floor

Question 20

is the general term for permanent covering of a floor

Answer 20

flooring

Question 21

materials for flooring

Answer 21

lumber
bamboo
concrete

Question 22

are constructed with the primary function of providing the building occupants protection from rain, sunlight, and other elements

Answer 22

roof

Question 23

waterproof cover of the building

Answer 23

roofing

Question 24

seven parts of roof frames

Answer 24

girt plates
trusses
rafter
purlins
purlin’s cleat
stretchers
truss braces

Question 25

support either the trusses or the rafters and they tie the end of the post and vertical stats

Answer 25

girt plates

Question 26

are braced frameworks in triangular form and hold the roof

Answer 26

trusses

Question 27

it is a part of a truss that supports the purlins

Answer 27

rafter

Question 28

where the roofing materials are attached

Answer 28

purlins

Question 29

anchor the purlins to the rafters and prevent the purlins from tilting

Answer 29

purlin’s cleat

Question 30

anchor the purlins to the rafters and prevent the purlins from tilting

Answer 30

purlin’s cleat

Question 31

a horizontal members place between the tie beams of the two trusses and they serve to study their lower part

Answer 31

stretchers

Question 32

Usually connect the typing of one truss to the upper part of the other truss thus steadying the upper part of the trusses

Answer 32

truss braces

Question 33

roofing materials

Answer 33

fiber roofing
canvas roofing
wood shingles
slate roofing
metal roofing
tiles
reinforced concrete
plastics
micro-concrete roofing tiles
asbestos sheets
nipa
cogon
bamboo