BOOK 29 Truck Operations Manual- PORTABLE MONITOR Flashcards
Securely tie the portable monitor to an object capable of withstanding _____lbs of force.
900
The Crossfire Upper Assembly weighs ____ pounds and the Stow-A-Way 800 Base weighs ____ pounds, including the integrated 4” in-line shutoff valve that weighs ____ pounds Combined, the total weight of the portable monitor is approximately ___ pounds.
Upper assembly: 17lbs
Base: 43.7
In line shut off: 23lbs
Total weight: 61lbs
The automatic drain in the portable monitor closes when the pressure exceeds ___ psi and re opens again when pressure drops back to that point
5psi
The portable monitor is intended for maximum flows of ___ gpm. Task Force Tips has allowed the LAFD to flow up to ___ gpm with the portable base as long as it is attached to a loop of loaded 4” supply hose.
800 gpm
1000 gpm
Length of tie down strap for portable monitor?
8ft
When the nozzle of the portable monitor is at an angle of 45 degrees, the force acting sideways is _______ to the force acting downward on the base.
Equal
At an angle of 35 degrees, (the angle at the elevation safety stop), approximately ____ % of the nozzle reaction force is acting sideways on the base.
82%
For the portable monitor, what angle is set for the elevation safety stop?
35 degrees
The Crossfire portable monitor has ___ or ___ tungsten carbide tipped spikes on the legs and the base to resist sliding by digging into the surface the monitor is sitting on.
5 or 6
Spikes on the portable monitor must be sharp to provide resistance to sliding. Replace any spike if the tip diameter exceeds ____ inch.
1/16 inch
Members _________ use any smooth-bore tip, stacked tips, or other spray nozzles on the Crossfire Portable Monitor.
Shall not
Gpm and psi of portable monitor?
350 gpm, 105 psi
500 gpm, 110 psi
750 gpm, 115 psi
1000 gpm, 125 psi