BIG kahuna Flashcards
Bench stock is established to provide what?
Necessary spare parts at the worker level.
What form do you use if a hazard cannot be eliminated at your work level?
AF Form 457.
What skill level is required for someone who is conducting qualification training?
Same level as the trainee.
What is not included in an annual conventional munitions forecast?
Reefing line cutters.
What form do you use to change an authorization on an allowance source code?
AF form 601
What is an advantage of the informal lecture over the formal lecture?
less preparation time is needed and instructor can use questions to stimulate interest.
You identify aviators oxygen cylinders by their green color and what?
A green band followed by a white band and the words “oxygen aviator’s” stenciled in white letters along the side.
What is not an approved reason for using a cross reference form DD 2861 in a TO file?
When a TO is temporarily signed out to an individual.
When transporting M9’s when must you be armed?
16 or more.
Forcast for selected calendar time change items must be made how often?
Annually.
What is the classification of a mishap that involves chemical agents
Class D.
The class IV parachute torso harness…
is pre fitted and adjusted to the wearer.
When inspecting the PLD how many inches does the spring leg extend into the latch guard?
1/8
When repairing an ACES II drogue canopy vertical ribbon, how many inches beyond the damaged area must the tape extend?
4
When a personnel parachute is prepared for shipping which form is initiated to reflect the date the assembly was removed from service?
AFTO Form 392
What is the main aneroid housing slip nut torqued to on the Scot automatic ripcord release?
20+-5 in lbs
Which inspection will require a complete inspection and repack on the MC-5 parachute?
182 day.
What type of ripcord is installed on the BA-18 parachute?
T handle.
The Scot automatic ripcord release arming cable will pull from the arming cable knob guide at
20+-5 pounds
Repaired stitching should overlap the original stitching by no less than how many inches?
2
An ACES II drogue parachute installed in an F-15 is inspected every..
3 years
How many pounds of extraction force is required to remove the cable from the automatic survival kit actuator upper disconnect assembly?
25+-5
How long is the deployment yoke on the ACES II drogue?
9.5 inches
When the O2 mask connector CRU-60 mounting bracket is installed, you must ensure the screws extend into the V mounting half at least
1/4 inches
Where on the automatic back parachute canopy is the date of the repair stenciled?
Bottom section gore 28
How are the containers of the MA-1 rescue kit interconnected?
Polyethylene rope, 210 FT long.
What is the service life of the FLU-9 B/P inflator batteries after the DOM?
3 years.
What component is not included in the empty weight marking of an FLU-2 A/P one man raft CO2 cylinder?
Diffuser plug.
What is the max size damage that can be repaired on the F-2B flotation tube?
6in.
What is used to identify each AN/PRQ-7 radio in the CSEL network?
A unique, non changeable radio identification number set at the factory.
Which AFTO form contains blocks for specific info concerning left and right inflator and battery dates of manufacture and expiration?
466A, LPU-9/P life Preserver.
What size Velcro patch is required for the SDU-30/E distress marker light attachment point on the F-2B flotation tube?
2*2 in
What type of fold do you use to prepare the top portion of the LPU-9/P cell for packing?
Fan fold.
Before you pack the 25 man life raft what is the overall width of the folded raft?
19+-1 in.
When performing a leak test on a life raft you must ensure the air source does not exceed…
40 PSI
What component reduces needle thread friction on the Chandler 767 sewing machine?
Oil cup.
What will help you keep track of tools?
Toolbox and tool inventory list.
When you are doing the final threading of the properly wound bobbin on the 206 RB you pull the thread…
under the tension spring and into the delivery eye.
What component is used to engage the reverse mechanism on the Consew?
Stitch regulator lever.
Which type of pliers should be used for cutting small, light materials like wires and cotter pins?
Diagonal cutting.
What type of feed does the Consew have?
Compound.
What stitch pattern always begins and ends with a bar tacking?
Baseball.
During repair of the rubberized backing of thermal radiation barrier curtains how far do you overlap the damage with Silastic?
1/2 in.
Which type of soundproofing sewn with a diamond pattern to hold the fiberglass material in place?
Blanket.
The silicone face piece of the 358-1506V folding quick don mask, attaches to the hard shell with,
a receiver assembly.
When doing local maintenance on the CRU-80/P filter assembly how often do you replace the O-ring?
Every year.
You can determine that the protective breathing equipment is unserviceable when what?
viewing window is pink.
What size thread do you use to resew the hook and pile tape on the retention assembly of the chemical biological oxygen mask?
B nylon.
Which component is not within the helmet display unit of the JHMCS?
Helmet Vehicle Interface.
The CSU-17/P vest on the combat edge equipment is periodically inspected every?
120 days.
What is the secondary purpose of the quick disconnect warning device valve?
To relieve excess pressure produced by the continuous flow of the oxygen from the emergency cylinder assembly.
When you inspect the CRU-94/P integrated terminal block, what is the maximum allowable leakage when the tester FLOWMETER SELECTOR is set to LOW RANGE?
45 SCCM.
What is the HGU-56/P made of?
Graphite and polyethylene.
Why is the O2 mask port of the CRU-60/P fixed at the distal end?
To prevent failing of the oxygen mask hose and connector during ejection or bailout.
What is the largest linear tear that you can repair on the CWU-16/P anti exposure coverall?
2.5 in.
The demand oxygen system provides sufficient oxygen for flights up to a maximum of
35000 ft.
What temp do you heat the thermoplastic liner layers in the oven?
199F
On the EEU-2/P goggles, apppx what percentage of ambient light is allowed to pass through the analyzer in open mode?
20%
When you finalize the fit of the thermoplastic liner to the wearer use white correction fluid to mark the liner by putting…
two dots in front on in the back.
