before take off PF

Question 1

what is the order for FMGS setup

Answer 1

DIFSRIP
data
init
flight plan
secondary
rad nav
init B
perf

Question 2

what do I put in on init B and perf before critical data

Answer 2

expected taxi fuel
expected alternate fuel

red/acc and engine out acc are 15000ft aal

Question 3

after Pm gets atis what does PF say to ground

Answer 3

flight deck to ground
remove external power

Question 4

before start procedure after removing ground power

Answer 4

ACP - set and adjust
QNH - set
CSTR - selected
range - set
Needles - set
flight instruments - check
seat - adjust

Question 5

critical data entry

Answer 5

as PM if ready
init B - read out ZFW and MACZFW
write TOW on perf print out
perf - read all values from right to left
check clean speed

Question 6

departure brief

Answer 6

threats, MEL, STS, weather, dep alt, taxi, runway, perf, terrain, departure, stop alt, FMGC check emergencies, review

Question 7

PA

Answer 7

good morning welcome aboard this LEA operated flight bound for -
my name is - and joining me today is Kristian. in charge of yo0ur comfort but primarily your safety is -.
the flight time today is approx -. when it is safe to do so I will turn off the fasten seatbelts signs when this is off you are free to move around the cabin though we recommend keeping your seatbelt on incase we encounter any unforcast turbulence. if we do turn the seatbelts sign on please return to your seat and fasten you seatbelt
ill be doing the flying today so once we get up into the cruise ill give you an updated eta and weather.
I will now leave you in the capable hands of our cabin crew thank you

Question 8

what day uo say to ground when ready to push

Answer 8

flight deck to ground
are we ready to push

Question 9

once start and push clearance given

Answer 9

nw strg - check disc on ewd
thrust - idle
doors - closed

Question 10

engine start procedure

Answer 10

APU bleed
engine mode - start
engine 2 start - announce ]
engine 2 master św - on
chrono - start
when avail
engine 1 start - announce
engine 1 master św - on
chrono - reset

Question 11

after start procedure

Answer 11

eng mode sector - norm
apu bleed - off
eng anti ice - on if needed
apu master św - off
monitor PM

Question 12

once cleared for taxi

Answer 12

taxi and ray turn off lights - on
brakes - checked

Question 13

during or before taxi

Answer 13

flight controls - checked
departure brief - runway, sids, extras