basic safety term Flashcards
____ is an undesired event that results in harm to people, damage to property, or loss to process.
accident
Usually a contact with a source of energy above the threshold limit of the body or structure.
accident
____ is an undesired event which, under slightly different circumstances could have resulted in harm to people, damage to property, or loss to process.
incident
What are the 2 types of accidents?
- First Aid Case (FAC)
- Lost Day Case (LDC)
What are the 2 types of Lost Day Case (LDC) accidents?
- lost workdays-away from work
- lost workdays-restricted work activity
____ refers to any one time treatment and subsequent observation of minor work-related injuries which do not ordinarily require medical care.
First Aid Case (FAC)
____ case which involves says away from work or days of restricted work activity.
Lost Day Case (LDC)
The start of Lost Day Case ____ include the day of injury.
does not
____ refers to the number of workdays an employee would have worked but could not, due to occupational injury or illness.
lost workdays-away from work
____ refers to the number of days an employee was assigned to another job temporarily, worked at a permanent job less than fulltime, or worked a permanently assigned job but could not perform all normal duties associated with it, due to occupational injury or illness.
lost workdays-restricted work activity
_____ is the control of recognized hazards to attain an acceptable level of risk.
safety
_____ is to regulate or restrain.
control
___ means to put on track.
control
_____ are unsafe practices or conditions, that if not controlled may results into the occurence of an accident or an incident.
hazards
According to Heinrich study, unsafe practice are ____, unsafe conditions are ____.
88%, 10%
_____ are behaviors which could not permit the occurrence of an accident or incident.
unsafe practice
____ means deviation from standard procedures or practices.
unsafe practices
____ are circumstances which could permit the occurrence of an accident or incident.
unsafe conditions
____ means deviation from standard conditions (equipment, matierals, or environment).
unsafe conditions
____ is a process of identifying risks and job hazards basically begins with a thorough analysis of causes of accidents with the aim of arriving-up with an improved/new standards.
hazard analysis
_____ is a process of revealing hazards and following through the necessary corrective actions which results to a safer workplace.
safety inspection
_____, at its most basic, is based upon the principle of keeping fuel sources and ignition sources SEPARATE.
fire safety
_____ is a program or outline of activities conducted to promote safety consciousness among management and workers in work places in order that accidents and/or illness can be elimated or minimized to the lowest reducible level.
safety program
____ is a critical examination of the safety and health management programs to determine their effectiveness and compliance to regulatory standards.
safety audit
