B1 revision targeted decks Flashcards
Histology
Describe features of neural tissue
- Cellular Elements
- Neuron (Nerve Cell)
- Neuroglial Cells
– central neurglia (astrocyte,
oligodendrocyte, microglia and ependymal
cell)
– peripheral neuroglia (schwann cell in
nerve and ganglion satellite (capsular) cell
in ganglion) - Intercellular Substance: extremely small amount
CNS:
* Neurons and their processes
* Glial cells
– Oligodendrocytes: small round dense homogenous nucleus, cytoplasmic processes wrap axons to form myelin
– Astrocytes:processes, pale chromatin, round to oval nuclei, physical and metabolic support to neurons
– Microglia: elongated irregularly shaped nucleus, clumped chromatin, mesodermal origin, same origin as monocytes, fixed macrophage
– Ependymal cells: line ventricles, ciliated, cuboidal or low columnar, lack of tight junctions
* Collagen only found around
blood vessels
* Meninges –surrounds brain: dura mater, dense fibroelastic tissue
* Choroid plexus: capillaries and choroid cells with microvilli, arises wall of ventricles, makes CSF
Histology
Describe connective tissue types and components
Ordinary connective tissues (connective tissue proper)
Loose ordinary connective tissue: mesenchyme, areolar, mucoid, reticular, adipose white and brown
Dense ordinary connective tissue - irregular or regular
Specialised connective tissues
Adipose tissue
Blood and blood forming tissues
Cartilage
Bone
Elastic tissue
*Cells - indigenous
*Fixed - Fibroblasts, Reticulocytes,
Adipocytes
*Wandering - Macrophages, Mast cells,
Eosinophils, Lymphocytes, Plasma cells
- migratory
*Neutrophils, Eosinophils
*Lymphocytes, Monocytes
*Extracellular matrix
*Fibres:
*Collagen
*Reticular fibres
*Elastic fibres
*Ground substance
*Proteoglycans, water, salts and other
low molecular substances
- migratory
List and describe the features of the three types of muscle
Skeletal muscle:
Both types found in all human muscles in different proportions
Type 1: Slow contraction -
Aerobic, using oxidative phosphorylation, many mitochondria.
Cells contain large amount of myoglobin (O 2 storage - red
colour), many capillaries
Type 2: Fast contraction -
Anaerobic, using glycolysis, therefore rich in glycogen,
white colour
—
Muscle fibres contain myofibrils
Myofibrils are elongated cylindrical
structures made up of contractile proteins
Cross striations of striated muscle is due to
the ordered arrangement of these
contractile proteins
— The dark A band is made of thick myosin
filaments
The light I band is made of thin actin filaments
The Z bands mark the anchor points of the
actin filaments
Triads (terminal cisternae and T tubules) at A-I
junctions
—
Not striated
Small cells spindle shaped, single central oval nucelus
still have actin and myosin, No Z, but dense bodies and attachement junctions
Involuntary
Under autonomic and hormonal control
Visceral structures
Enables continual contractions of low force
Synaptic control: unitary/multiple; phasic and tonic
—
Elongated cells
Central nuclei
Branching fibres with intercalated discs
Contractile proteins arranged similarly to skeletal
muscle
Cross striations
Contractile units: sarcomeres made of myosin
and actin
Sarcoplasmic reticulum
and T tubules similar to
skeletal muscle
T tubules are larger
and located at the level
of the Z disc
Contractile proteins
arranged similarly to
skeletal muscle
Intercalated Discs
Made of 3 types of membrane
contacts
Fascia adherens
site of actin filament insertion
Desmosomes
anchorage for intermediate
filaments
Gap junctions
pores with low electrical resistance
enabling ion and molecule transfer
between the cells → coordinated
contraction
List the gap junctions between epithelial cells and briefly describe them
Three are different types of connecting junctions, that bind the cells together.
occluding junctions (zonula occludens or tight junctions)
adhering junctions (zonula adherens).
desmosomes (macula adherens). There are also ‘hemidesmosomes’ that lie on the basal membrane, to help stick the cells to the underlying basal lamina.
Gap junctions. These are communicating junctions. (also known as nexus, septate junction)
List types of cartilage and describe the process of cartilage formation
- hyaline cartilage: articular cartilage, glassy blue
- fibrocartilage: white, eg IV discs
- elastic cartilage: yellow, found in ears
- Begins fifth week of life
- Precursor cells become rounded and form densely packed cellular
masses, centres of chondrification. The cartilage-forming cells,
chondroblasts, begin to secrete the components of the extracellular
matrix of cartilage - As amount of matrix increases chondroblasts become separated from
each other - Chondroblasts become isolated in small cavities within the matrix
lacunae - Chondroblasts differentiate into mature cartilage cells
chondrocytes
Cartilage growth occurs by two mechanisms:
* Interstitial growth
* Appositional growth
Interstitial growth
* Chondroblasts within
existing cartilage divide and
form small groups of cells,
which produce matrix to
become separated from
each other by a thin
partition of matrix
* Interstitial growth occurs
mainly in immature
cartilage
Appositional growth
Mesenchymal cells surrounding
cartilage in the deep part of
perichondrium (or the chondrogenic
layer) differentiate into
chondroblasts. Appositional growth
also occurs in immature and mature
cartilage
Pathology
Describe the components of tymour survival, and steps of malignant transformation
Two key basic components of a neoplasm:
- proliferating neoplastic cells - these determine the behaviour and outcome of the neoplasm
- stromal component/desmoplastic stroma - which is responsible for the neoplasm’s growth and evolution
- Malignant transformation of target cells
- cell cycle inhibitors work on G1 cell cycle checkpoint. Key cyclin here is cyclin D/CDK4
- p53 or “guardian of the genome”, is key molecule at G2 cell cycle checkpoint. Often perturbation of p53 is associated with cancer development - Proliferation and accumulation of transformed cells
Proliferation determines the rate of neoplasm growth.
Transformed cells accumulate due to two factors:
- inhibition of apoptosis ^[[[Pathology Lecture 5]]]
- telomerase activity, which confers limitless replicative potential - Local invasion
Invasion is a biological hallmark of malignant tumours, as defined as tissue moving into sites where they should not be.
Invasion is facilitated by the loss of adhesion molecules on neoplastic cells ^[aka non-functional or absent desmosomes]. - Distant metastasis
Distant metastasis is defined as the presence of neoplastic implants at a site away from the primary tumour.
It is a hallmark of malignant neoplasms (along with invasion).
Pathology
- Define the acute phase response, outline the cells involved
The acute phase response (APR) is a prominent systemic reaction of the organism to local or systemic disturbances in its homeostasis caused by infection, tissue injury, trauma or surgery, neoplastic growth or immunological disorders.
The acute-phase reaction characteristically involves fever, acceleration of peripheral leukocytes, circulating neutrophils and their precursors.
n response to injury, local inflammatory cells (neutrophil granulocytes and macrophages) secrete a number of cytokines into the bloodstream, most notable of which are the interleukins IL1, and IL6, and TNF-α. The liver responds by producing many acute-phase reactants. Positive acute-phase proteins serve (as part of the innate immune system) different physiological functions within the immune system. Some act to destroy or inhibit growth of microbes, e.g., C-reactive protein, mannose-binding protein,[3] complement factors, ferritin, ceruloplasmin, serum amyloid A and haptoglobin. Note EST correlates with CRP and other acute phase proteins, but is not direct—depends on elevation of fibrinogen.
Pathology
List the features of malignancy
Cytological features:
- variable cell size and shape (cellular pleomorphism) ^[pleomorphism = variation in appearance]
- variable nuclear size and shape (nuclear pleomorphism)
- increased nuclear- cytoplasmic ratio (normal 1:4, 1:6 – ratio in neoplastic cells may approach 1:1)
- hyperchromatic nuclei (increased DNA, on haematoxylin and eosin, looks more ‘blue’)
- increased mitosis/abnormal mitosis
- tumour (neoplastic) giant cells
Architectural features:
- refers to how the cells relate to each other, the arrangement of cells with respect to each other
- another way to think about it is organisation
- in general, benign neoplasms are orderly, and benign neoplasms tend to grow by expansion, and is often associated with capsule, while malignant neoplasms are disordered, and malignant neoplasms infiltrate and ‘penetrate neighbouring tissues with hostile intent’
Pathology
- Distinguish between granuloma and granulation tissue
Granulomatous inflammation is a special type of chronic inflammation.
A granuloma is a collection of activated (epithelioid) macrophages, often surrounded by T lymphocytes, sometimes with central necrosis.
- Granulomata are small - usually microscopic
- Granulomata form in order to try to contain an offending agent that is difficult to eradicate e.g. foreign material (sutures), some infections
- activated macrophages develop abundant cytoplasm and begin to resemble epithelial cells i.e. epithelioid histiocytes
- macrophages may fuse to form multinucleated giant cells
Formation of granulation tissue: fibroblasts, loose connective tissue, new blood vessels and interspersed leukocytes. Normal part of scar formation, general feature of chronic inflammation.
Pathology
Describe processes of wound healing and repair
There are two pathways to repair:
- regeneration
- scar formation
Regeneration can take place in tissues with labile and stable tissues when tissue damage isn’t extensive.
Regeneration can occur via two mechanisms:
- proliferation of mature cells
- proliferation and differentiation of tissue stem cells
The restoration of tissue architecture can only occur if the tissue is generally structurally intact.
Three broad steps:
1. Priming via cytokine signals
2. Growth factor phase: stimulate gne expression, cell cycle enry and replication
3. Termination phase- back to quiescent state
Scarring:
1. Inflammation – leukocyte invasion
2. Angiogenesis due to gfs
3. Granulation tissue formation
4. Connective etissue deposition by fibroblasts eg ECM
5. Contraction of scar by myofibroblasts
6. Remodelling – stable fibrous scar
Can heal by primary intention: when the injury only involved the epithelial layer, with only focal BM disruption and connective tissue/cell death or secondary: cell and tissue loss is extensive.
Primary steps:
- In the immediate: a blood clot forms
- Within 24 hours, inflammation occurs, infiltration of PMNs
- Within 24 to 48 hours, epithelial cells migrate from the edges of the wound
- On day 3, macrophages predominate, and granulation tissue begins to migrate
- On day 5, VEGF= peak neovascularisation (of leaky vessels), ECM deposition
- After 1 week: continued collagen and ECM deposition, and vascular regression (strength decreased to 10% of normal)
- After 1 month, an established scar is formed, with minimal inflammation, epidermis repaired, adnexal structures , i.e. appendages, lost
- Onwards, scar matures and increases in strength i.e. 70-80% of normal
Note in healing by secondary intention, much more granulation tissue is formed.
Note that the timeline of healing by secondary intention is similar to the processes involved in primary intention. The major differences include:
- larger clot
- more necrosis
- more inflammation
- more granulation tissue formed
- wound contraction is important
Clinical disciplines/pathology/haematology
List the types of anaemia and the changes you would expect
Physiology
List the causes of shock and responses by the body
Physiological shock is a state of cardiovascular dysfunction resulting in generalised inadequacy of oxygen delivery or DO2, relative to the metabolic requirements.
In other words, an imbalance.
- Hypovolaemic
The primary problem is:
- intravascular volume loss: bleeding/lose excess fluid from gut or kidneys
- Inadequate stretch of muscle fibres
- inadequate volume into heart i.e. pre-load
- Low stroke volume
- Low cardiac output
- DO2 = (SV x HR) x ([Hb] x SaO2 x 1.39) + PaO2 x 0.003
Response: - Tachycardia (CO = ↓SV x ↑HR)
- Vasoconstriction (BP = ↓CO x ↑TPR) (cold peripherally and pale)
- Sympathetic outflow (sweating)
Treatment:
- replace whichever fluid has been lost
- correct underlying problem e.g. thirst, diabetic ketoacidosis, fluid replacement, and insulin treatment
- Cardiogenic shock
- Failing heart (myocardial infarct, cardiomyopathy)
- Too much stretch of myocardial fibre
- Low stroke volume
- Low cardiac output
DO2 = (SV x HR) x ([Hb] x SaO2 x 1.39) + PaO2 x 0.003
Response:
- Tachycardia (CO = ↓SV x ↑HR)
- Vasoconstriction (BP = ↓CO x ↑TPR)
(cold peripherally and pale)
- Sympathetic outflow (sweating)
Treatment:
- inotropes
- fluid restriction
- diuretics
- correct underlying problem (ischaemia, valve)
~Similarities between hypovolaemic and cardiogenic shock~
Primary problem:
- Hypovolaemia: inadequate filling of heart, low stroke volume
- Cardiogenic shock: low stroke volume (due to failing heart: contractility and valvular dysfunction)
Response:
- sympathetic outflow (sweating)
- tachycardia
- vasoconstriction (cold peripherally, tachycardiac, sweaty)
~ Differences~
- Hypovolaemia:
- postural hypotension
- invisible JVP or low CVP
- evidence of loss: blood, negative fluid balance, diarrhea, vomiting
- Cardiogenic:
- signs of heart failure: raised JVP, oedema (pulmonary and peripheral), gallop rhythm
- reasons for heart failure: arrhythmia, ischaemia/infarct, VSD, valve failure
- Septic shock
Primary problem:
Initially:
- excessive cytokine release (infection, inflammation)
- peripheral vasodilation (dec. BP = CO x dec. TPR)
- reduced venous return to heart
- reduced stroke volume
- reduced cardiac output
More complicated:
- treatment includes supplementing with fluids
- improves preload and hence stroke volume
- already tachycardiac (temperature)
- improves cardiac outpit, often massively, in low resistance system
- huge DO2, but:
- still vasodilated (warm) with adequate pre-load, BP remains low
- and cells cannot utilise oxygen
Two stages:
1. decreased preload to heart (low cardiac output)
2. with fluids, large cardiac output, but low BP - need pressure gradient for there to be flow
Treatment:
- correct underlying problem
- volume resuscitation
- vasoconstriction
- antibodies
- Obstructive shock
Primary problem:
Inadequate volume into the (left or right) heart
- Good systemic venous return
- Inadequate filling of the heart eg cardiac tamponade ^[cardiac tamponade** a dangerous situation in which there is a build-up of fluid around the heart within the pericardial sac. This causes compression of the heart, which is therefore unable to fill with blood adequately in order to pump effectively], pulmonary embolus
- Reduced Stroke Volume
- Reduced Cardiac Output
DO2 = (SV x HR) x ([Hb] x SaO2 x 1.39) + PaO2 x 0.003
Response:
- Tachycardia (CO = ↓SV x ↑HR)
- Vasoconstriction (BP = ↓CO x ↑TPR) (cold peripherally and pale)
- Sympathetic outflow (sweating)
- raised JVP
- pulsus pardoxus
Treatment:
Depends on aetiology
- cardiac tamponade: fill the right heart as much as possible, drain the fluid as quickly as possible
- pulmonary embolus: thrombolysis, ongoing anticoagulation
Physiology
Describe the oxygen delivery equation, why oxygen is important, and list and describe the determinants of oxygen delivery
Oxygen is important in physiology because it is the terminal electron acceptor at the end of the electron transport chain in the mitochondria ([[Biochemistry Lecture 8]]). It is thus integral to aerobic respiration and the generation of (a lot of ) ATP.
In other words, oxygen is necessary for energy production.
Energy is generated by catabolising macromolecules i.e. sugars, fats and amino acids.
Catabolism of all three macromolecules consumes oxygen and produces or releases carbon dioxide. However, the ratio of oxygen consumed to carbon dioxide produced is different. This ratio can be expressed as the respiratory quotient (RQ).
DO = C0 Xaoc
= svhr * (Hb conc sao21.39 + paO20.003)
Biochemistry
List and describe the steps of cholesterol synthesis
There are five main steps to cholesterol synthesis:
1. Mevalonate synthesis in the cytosol: 3 moleciles molecules of acetyl CoA used
- Reaction sequence identical to KB synthesis
- But reactions are cytosolic and HMG- CRA reductase catalyses the committed step
- Enzyme attached to ER membrane
- Irreversible reaction
- Regulated step of pathway
note: this is essentially the reverse of ketone body synthesis (swapping out lyase for reductase)
2. Isoprene formation or activation. 2 isoprenoids are formed, and this has an energy cost
3. activated isoprenes are used in the condensation to squalene (6 used).
4. Squalene undergoes ring closure, this occurs in the ER
5. Cholesterol is formed
Describe the link between gluconeogenesis and ketogenesis
The carbon skeletons of amino acids may proceed to form either glucose or ketone bodies (a fuel source that brain cells can use in starvation). In other words the C skeleton can be metabolised for energy release.
Carbon skeletons that lead to glucose are said to be glucogenic e.g. alanine. Carbon skeletons that lead to ketone bodies are said to be ketognenic.
note that there are also ‘mixed’ amino acids i.e. Phe, Trp and Tyr.
Describe glucose storage
Storage of carbohydrates for energy provision
The ‘normal’ blood glucose of a healthy adult is between 3.6 to 5.8 mM.
Post meal levels may rise to 7.8 mM in non-diabetics. The recommended post-meal level for healthy adults is less than 10 mM. ^[the calculation for these values in terms of amount: 75 kg male, blood volume of 5L, 5.5 mM corresponds to 5 g of glucose]
In order to maintain this range of glucose concentrations, there must be a mechanism for glucose uptake (storage) and mobilisation.
The liver is the organ primarily responsible for glucose uptake. If the concentration of glucose falls below 4 mM, there is low hepatic uptake. However, if the concentration increases higher than 7mM, there is increased hepatic uptake.
(note that between 4 and 7 mM, not much uptake?)
The properties of uptake are controlled by the characteristics of GLUT-2 transporter proteins. In other words it constitutes a key regulatory mechanism. [[Physiology Lecture 2]].
The key players of glucose storage
GLUT-2 works to uptake glucose into hepatocytes (ergo, GLUT-2 is found in the liver). GLUT-2 engages in facilitated (passive) transport. It is a ?low affinity, and high capacity process, and is insulin insensitive.
Notably, GLUT-2 is not strictly glucose specific, and can transport galactose and fructose.
Enzymes, glucokinase in the liver and hexokinase elsewhere (notably in the muscle), phosphorylate glucose to glucose-6-phosphate. Not that although glucokinase has higher affinity (high Km) for glucose compared to hexokinase, their main purpose is the same: to maintain the glucose gradient into the cell by ensuring glucose goes into the appropriate cell.
List and describe the bypass reactions of gluconeogenesis
REACTION 1:
* pyruvate carboxylase enzyme
* ATP dependent reaction
* carboxylation of pyruvate
* mitochondrial reaction
REACTION 2:
* PEP carboxy-kinase enzyme
* ATP dependent reaction
* cytosolic reaction
PFK1
* Phosphofructokinase-1
* pace-setting of glycolysis
* reaction driven to completion
* reverse reaction unfavourable
F1,6bPase
* Fructose-1,6-bis-phosphatase
* de-phosphorylation
Not a simple reversible reaction
Step requires distinct enzyme to glycolysis
Reciprocal regulation of enzyme activity
The final release
Energy precludes the reverse of the hexokinase/glucokinase reaction
(ATP dependent)
Energy considerations again!
The enzyme is glucose-6-phosphatase
G6-Pase is found only in liver/kidney
These tissues participate in gluconeogenesis and provide
glucose for peripheral tissues
Glucose (but not glucose-6-phosphate) can leave cells via GLUT
List some fates of cholesterol
There are many utilizations of cholesterol and its derivatives in the body.
Esterification
Synthesised cholesterol is exported to peripheral tissues, the transport of synthesized cholesterol occurs from the liver via lipoproteins. The primary storage particles for cholesterol are LDLs. Cholesterol is converted to an ester form, which increases its hydrophobicity. ACAT is an enzyme found in the liver, which adds a fatty acid to cholesterol to form cholesterol esters. L-CAT transfers an acyl group from PC which are found in HDL particles.
Bile components i.e., using fat to digest fat
Cholic acid or bile acids are polar versions of cholesterol. They are synthesized in the liver and are stored in the gallbladder and then released to bile. Colonic acid or bile acids have detergents like properties which worked to break down or emulsify fatty acids. Thus, they have a role in solubilising dietary lipids.
Glycolic acid
Bile salts are conjugated bile acids. They are hydrophilic and are found in the small intestine. Glycine and taurine are frequent conjugates. Bile salts also have detergent like properties and work to solubilise dietary lipids.
Hormones
Progesterone is a steroid precursor. It prepares the uterus for implantation and prevents ovulation. Cortisol is another hormone derived from cholesterol. It promotes gluconeogenesis and suppresses inflammation. Testosterone is another cholesterol derived hormone which promotes male sex development and maintains characteristics. Estradiol is a another cholesterol derived hormone which promotes female sex development and maintains characteristics.
Describe the process of glycolysis and maintenance
The glycolytic pathway is the primary reaction involved in the catabolism (oxidation) of glucose.
In summary:
![[Pasted image 20230315133112.png]]
Glycolysis occurs in the cytoplasm of the cells.
It is the partial oxidation of glucose, yielding two 3C molecules known as pyruvate. It also generates 2 ATP (net) per glucose, and also generates the reduced co-factor NADH (2 per molecule of glucose).
Glycolysis links to the TCA cycle for complete glucose oxidation. It also links to the anabolic pentose phosphate pathway.
The glycolytic pathway is responsive to the cellular state and to hormones.
The pathway occurs under both aerobic and anaerobic conditions. It is a vital pathway for erythrocytes(how does it do this?) as well as the brain.
The complete pathway is shown below
![[Pasted image 20230315133506.png]]
Some important takeaways from this:
- The first step, catalysed by hexokinase, is an energy dependent step i.e. requires ATP (recall also that the enzyme in the liver is glucokinase)
- The third step, catalysed by PFK-1, is a energy dependent step. It is also the first committed step of glycolysis, and is thus highly regulated
- At step 4, 3 carbon compounds are produced from fructose-1,6-bisphosphate (‘snapped in half’) which are inter-convertible
- At step 5, the generation of 1,3 bisphosphoglycerate, catalysed by GA3DPH, generates a reduced cofactor NADH, which links to TCA cycle
(note that low NAD+ concentration limits glycolysis, i.e. energy has been produced?)
- The production of 3-phosphoglycerate generates ATP (2 per molecule of glucose, 1 per 3C compound). This balances the earlier loss of ATP
- The final step which converts PEP to pyruvate also generates ATP(2 per molecule of glucose, 1 per 3C compound). It is catalysed by PK, and this step is also highly regulated.
In order for glycolysis to continue, we need a continual supply of NAD. Thus NADH generated in glycolysis keeps it going through the TCA cycle, regenerating NAD which returns to glycolysis
n.b. this process requires the presence of oxygen
Under aerobic conditions, NAD+ generated via the TCA cycle is returned to cytoplasm via shuttle system from mitochondria. NADH is generated from the conversion of GA3P to 1,3bPG and enters the TCA cycle, and the cycle repeats.
However, under anaerobic conditions, NAD+ must be generated via a different mechanism. Instead of entering the TCA cycle via the acetyl CoA ?link reaction, pyruvate is shunted* to lactate by LDH, this regenerates NAD+ which returns to the GA3P->1,3bPG reaction, and then lactate is recycled by ?liver.
![[Pasted image 20230315134738.png]]
Note: glycolysis is a linear metabolic pathway, with three metabolic pools. These pools represent inter-convertible intermediates. The reactions linking these pools e.g. F6P to F16bP, 1,3bPG to 3PG, and PEP to pyruvate, are key steps and are controlled.
Describe fatty acid translocation and catabolism
Three main steps are involved:
1. Acyl CoA conversion i.e. activated fatty acid converted to acyl carnitine by action of CAT1. This conversion or modification is required so that it can be translocated across the membrane
2. Acyl carnitine transported into the mitochondrial matrix by an antiporter (acyl carnitine in, carnitine out)
3. Acyl CoA liberation i.e. the regeneration of acyl CoA with CoASH, by action of CAT2. The acyl CoA can then go on to b-oxidation. This also liberates carnitine which can be transported back
—
There are four main steps that comprise fatty acid catabolism:
1. Oxidation (which reduces FAD to FADH2)
2. Hydration (addition with H20)
3. Oxidation (which reduces NAD+ to NADH)
4. Thiolation (via action of CoASH)
Can cycle through this process multiple times in order to get more NADH and FADH2
A focus on β-oxidation
This process occurs entirely within the mitochondrial matrix. It is termed β-oxidation simply because the β-carbon is the one that gets oxidised.
The entire reaction effectively strips 2 carbons per cycle, and these are liberated as acetyl-CoA ^[this can go on to enter the TCA cycle, generating energy via downstream oxidative phosphorylation). A new (n-2) acyl-CoA rejoins the process, and continues until a single 2C acetyl CoA molecule is produced, which can enter the TCA cycle.
The two reduced cofactors FADH2 and NADH can also go on to enter the TCA cycle to undergo oxidation (and also to generate more energy for the cell)
note that from a single fatty acid molecule: n/2 acetyl CoA molecules, (n/2 -2) FADH2 and NADH are generated, all of which can go on to the TCA cycle and generate energy. This makes fatty acids a very energy dense molecule, when compared with carbohydrates and proteins i.e. it is a more energy efficient process (higher yield) ^[glucose yields about 36 ATP, a 16C fatty acid will generate 129 ATP]
Biochemistry
Describe the steps of ketone body synthesis and the utilisation of KBs
HI
Mitochondrial enzymes of the hepatocytes engage in KB synthesis. Synthesis is constant.
- Two Acetyl- CoA molecules condense to form acetoacetyl CoA by the action of thiolase, which removes a CoASH.
- HMG-CoA synthase then catalyses the second step, converting acetoacetylCoA to HMG CoA, using the input of an acetyl-CoA and the removal of a CoASH group
HMG-CoA lyase removes an aetyl-CoA group in order to synthesise aceto-acetate
aceto-acetate can then be converted to acetone (by removal of Co2, non-enzymatically) ^[see also: https://www.ncbi.nlm.nih.gov/books/NBK493179/] or b-hydroxy-butyrate (using an NADH, and the action of b-hydroxy-butyrate dehydrogenase)
The process of ketone bodies as a fuel is a truncated i.e. 3step process, which also occurs in the mitochondria.
1. Once KBs reach extra-hepatic tissues, b-hydroxy-butyrate is converted back to acetoacetate by b-hydroxy-butyrate dehydrogenase (This generates an NADH)
2. Aceto-acetate is then converted back to aceto-acetyl CoA by keto-acyl-CoA transferase (this also converts succinyl-CoA to succinate) ^[[Biochemistry Lecture 7]]
3. Aceto-acetate CoA is then broken down into two acetyl-CoA molecules by thiolase
4. These acetyl-CoA molecules can then enter the TCA cycle and oxidative phosphorylation for energy i.e. ATP generation
note: virtually all enzymes involved in KB utilisation are the same as in synthesis, ‘moving backwards’ from KBs to acetyl-CoA. Only key difference is keto acyl-CoA transferase; this is an enzyme not found in the liver as liver is an exporter not a user. ^[note a potential exam question]
Describe glucose mobilisation
There are three main processes of the storage and mobilisation of carbohydrates, they include:
- glycogenesis (GG): this occurs following meals. Glucose is stored as glycogen.
- glycogenolysis (GGL): the rapid mobilisation of glucose from storage
- gluconeogenesis (GNG): the synthesis of glucose during prolonged fasting (starvation)
These processes ensure that there is sufficient glucose supply to the brain, while also utilising and scavenging glucose precursors.
~ A closer look at glycogen~
Glycogen, as previously described, is the glucose storage form in (animal) cells. It is a polymer of glucose linked together by a -1,4- glycosidic bonds. At 8 to 10 residue spacing along the chain, the glycogen molecule has branch points, which are connected to the main chain via a -1,6- glycosidic bonds.
The initial residues are joined on the glycogenin primer (which is an enzyme).
There are two key enzymes in the build-up and breakdown of glycogen.
Glycogen synthase catalyses of glucose addition i.e. glycogen synthesis. Addition occurs via UDP-glucose. Note that glycogen synthase cannot generate the a -1,6 glycosidic bond, as so a branching enzymes adds a segment of a polysaccharide (consisting of 6-7 glucose molecules).
Glycogen phosphorylase catalyses glycogen degradation. The reaction involves phosphorolytic cleavage. Similar to glycogen synthase, a separate enzyme, a debranching enzymes is needed to tackle the a-1,6 glycosidic bond.
Describe the entry of carbohydrates, amino acids and FAs into TCA
The entry of carbohydrates into the TCA cycle is influenced by hormonal signals i.e. adrenaline and glucagon.
Entry is also controlled by cellular redox status ^[potential exam question]: a decrease in the ATP/ADP ratio and NADH/NAD ratio ^[a high ATP/NADH signals that there is no need for GL and carbohydrate catabolism, there is enough].
The targets for control include:
- glycogen phosphorylase
- glycogen synthase
- hexokinase
- PFK-1 (catalyses the rate-limiting step in glycolysis and change concentration of ATP)
- pyruvate kinase
Mitochondrial entry: glycolytic products
Glycolysis ends at the formation of pyruvate ^[assuming that glycolysis proceeded under anaerobic conditions], and pyruvate enters the mitochondria via a carrier (a hydroxyl antiporter). Lactate may also be shunted back to pyruvate.
![[Pasted image 20230325222800.png]]
note: aCoA comes from glycolysis and b-oxidation; reaction is a favourable reaction.
PDH catalyses the reaction, and is not actullay a single enzyme but rather an enzyme complex (5 in one). The reaction releases energy i.e. is exergonic and therefore is essentially irreversible.
PDH requires TPP, lipoic acid and FAD as cofactors, and is inhibited by ATP, acetyl-CoA and NADH.
The carbohydrate link reaction
This occurs after glycolysis, links pyruvate to acetyl-CoA.
![[Pasted image 20230325223125.png]]
The link reaction consists of four steps:
1. Decarboxylation involves assistance (a TPP prosthetic)
2. Oxidation–transfers electrons to lipoamide
3. Transfer reaction which utilises CoASH
4. Oxidation transfers electrons to FAD, and to NADH, and regenerate lipoamide ^[a small cycle in the linear path]
The reaction is highly regulated by both energy status and hormones e.g. high ATP, NADH, energy status (if high, no need for link reaction).
A focus on β-oxidation ^[note implications for altered metabolism in cancer, see x]
This process occurs entirely within the mitochondrial matrix. It is termed β-oxidation simply because the β-carbon is the one that gets oxidised.
The entire reaction effectively strips 2 carbons per cycle, and these are liberated as acetyl-CoA ^[this can go on to enter the TCA cycle, generating energy via downstream oxidative phosphorylation). A new (n-2) acyl-CoA rejoins the process, and continues until a single 2C acetyl CoA molecule is produced, which can enter the TCA cycle.
The two reduced cofactors FADH2 and NADH can also go on to enter the TCA cycle to undergo oxidation (and also to generate more energy for the cell)
—
recall the dynamic nature of amino acid ‘pool’.
Amino acids and TCA cycle intermediates are interchangeable.
Entry may be via many points; several enter via pyruvate
Biochemistry
Describe the synthesis of fatty acids
Entry to fatty acid synthesis occurs after the commitment step. It involves:
- 1: transfer of malonyl-CoA with ACP
- 2: condensation: losing CO2 and ACP, and joining either acetyl-ACP (if it is the first molecule in the chain) or acyl-ACP if joining a growing chain.
- 3: Reduction: which involves the formation of an oxidised cofactor NADP*
- 4: Dehydration
- 5: Reduction: which again results in the formation of an oxidised cofactor NADP*
note that in steps 3-5, a double bond is lost. This is to ensure the production of a linear, stable, unbranched, saturated hydrocarbon chain
- 6: resetting i.e. repeating the cycle with a new malonyl-CoA
Distinguish between GNG and GL
The three irreversible steps of GL are bypassed using enzymes unique to GNG:
- PEP to Pyr, instead of PK. Two steps. PC converts Pyr to OAA, OAA is converted to PEP by PEP-Carboxylase
- instead of PFK-1 converting F6P to F16P, F1,6-Pase
- instead of GK, G-6-Phosphatase (going G6P to Gluc)
the seven reversible reactions are shared between GNG and GL
Describe lipid movement
All lipids have poor solubility in aqueous solutions. Nevertheless, lipids are essential for cellular function and structure, and are huge energy source (thus dietary absorption is vital).
The amphiphilicity of lipids is a crucial element of their solubility.
The structures that fatty acids and lipids form in an aqueous solution is determined by its physical and chemical properties.
The complexity of lipid transport
:
Depending on their source and end, the pathways used to take up as well as mobilise lipids will differ.
Dietary lipids (FAs, TAGs, DGs) are taken up via the exogenous pathway: absorbed via emulsification and uptake into lipid storage (either in adipose tissue or hepatic storage).
Synthesised lipids from the liver are taken up via the endogenous pathway into lipid storage.
Mobilisation is undertaken by lipases, under the influence of hormones.
Lipoproteins: lipid transport vehicles
Lipoproteins are “ball”-shaped structures, where the hydrophilic heads of phospholipids, arranged in a surface hemi-leaflet, stick out, facing the aqueous environment, while hydrophobic tails point inward, away from the aqueous environment.
The content of lipoproteins is comprised of central TAGs (and cholesterol esters) ^[termed a hydrophobic core], which make up 80% of the mass.
Surface proteins, called apolipoproteins (APLs) interact with (mitochondrial) receptors and activate lipases (i.e. favouring mobilisation). The cholesterol-esters found in the core of lipoproteins are responsible for ‘picking up’ cholesterol and returning it to the liver.
There are several forms of lipoproteins, which can be ranked in terms of size (descending order): chylomicrons, LDL (colloquially bad cholesterol), VLDL, and HDL .
note: plasma lipoprotein particles are key to solving the solubility issue of lipids
Key takeaways from this figure:
- signals in the GI tract causes TAGs and FAs to be broken down and transported
- apoproteins allows for binding and mobilising of FAs
- HDL is a link, a “hoover” that picks up cholesterol and returns it
- VLDL, IDL and LDL differ in terms of density (i.e. )
- peripheral tissue i.e. near muscles
Mobilisation of fat stores
There are several steps to the mobilisation of fat stores:
1. Adipose tissue stores fat (approximately
3. Met Stimulus leads to release of hormones - adrenaline and glucagon
4. Signal transduction occurs at the adipocytes
5. This then leads to activation of hormone sensitive lipase
6. Which then leads to hydrolysis of fatty acids from TAGs
7. FAs then enter the blood and bind to serum albumin
8. Delivery of FAs to peripheral tissues for catabolism
Describe the urea cycle
Ammonia is highly toxic to humans. Ammonium ions also exhibit neurotoxicity.
As a consequence, both ammonium and ammonia must be excreted.
Ammonia, on the other hand, is converted to urea for excretion and accounts for the bulk of nitrogen excretion.
-Urea contains 2 nitrogens linked using CO2
The synthesis of urea requires a multi-step pathway. This is mediated by the urea cycle (or ornithine cycle).
This process occurs almost entirely in hepatocytes ( #liver), and is split between the cytosol and the mitochondrial matrix. Urea is then excreted from the body via the #kidney
Biochemistry
Describe the processes of protein metabolism and amino acid synthesis
- Protein metabolism
Polypeptides by pepsin, short peptide by trypsin in small intestine – di/tri by amino-peptidases, uptake by H-linked secondary transport into circulation, amino acids taken up by Na linked secondary transport - Amino acid synthesis
- all amino acids undergo transamination
- this is a reaction that changes an amino acid to an α-keto acid
- The reaction is oxidative deamination i.e. removal of an ammonia group in the presence of oxygen, which is transferred to another α’keto acid to produce another amino acid
- The α-keto acid can be used for the production of energy, biosynthesis or recycling (see below, aKGs)
As previously described, protein degradation has a number of fates. Amino acids may either be recycled or transformed. The amine moiety of amino acids is usually excreted (i.e. nitrogen is excreted), while the carbon skeleton is used for biosynthesis and energy production.
Cellular funnels are amino acid transferases; these are enzymes that catalyse the transfer of amino group to an α-keto acid.
The typical “acceptor” α-keto acid is usually αKG which funnels amino acids into glutamate. other acceptors can include oxaloacetate] or pyruvate. These will generate Asp or Ala, respectively. This shunting is described as flux
Biochemistry
Discuss the dual roles of HMG-CoA
Formation of cholesterol or KB synthesis/acetylCoA when diverted from TCA for GNG
- Two Acetyl- CoA molecules condense to form acetoacetyl CoA by the action of thiolase, which removes a CoASH.
- HMG-CoA synthase then catalyses the second step, converting acetoacetylCoA to HMG CoA, using the input of an acetyl-CoA and the removal of a CoASH group
- HMG-CoA lyase removes an aetyl-CoA group in order to synthesise aceto-acetate
- aceto-acetate can then be converted to acetone (by removal of Co2, non-enzymatically) ^[see also: https://www.ncbi.nlm.nih.gov/books/NBK493179/] or b-hydroxy-butyrate (using an NADH, and the action of b-hydroxy-butyrate dehydrogenase)
Or see above from choelsterol
Define chromosomes and describe them
DNA is a long polymer (almost 2 m in length). In order to fit into the nucleus of cells it must be wound tightly. To achieve this, DNA is wrapped around proteins called histones. Eight histones and the DNA that is wrapped around them form a condensed region of DNA termed nucleosomes, and a chain of nucleosomes comprises a linear structure known as the chromosome. This process of winding and packaging brings the DNA polymer down from a molecule with a 2nm width to 1400 nm (densely packaged), and a fraction of its original length.
Each species has a stable number of chromosomes in the cells of its organisms. Humans have 46 chromosomes in their karyotype, i.e. the complete set of chromosomes. Chromosomes can be divided into sex chromosomes, or allosomes e.g. X and Y sex chromosomes, or autosomes (all other non-sex chromosomes).
Each chromosome is comprised of a pair of sister chromatids. The ends of chromosomes (or sister chromatids) are known as telomeres. The point at which both sister chromatids meet is known as the centromere. The regions of the sister chromatids above the centromere region are known as the short arms (p), the regions below are known as long arms (q).
List the regulatory points of the cell cycle
The cell cycle refers to the phases of cell division.
It is a highly regulated process
Dysregulaton can lead to aberrant cell growth and can result in tumorigenesis.
One way in which dysregulation occurs is by the perturbation of cell cycle checkpoints.
The restriction or R point: a molecular complex that dictates G1 phase arrest or progression to S phase. It scans if conditiosn are favourable for DNA replication and cell division.
The internal and external environment is evaluated at R point.
Passing the R point involdes the actiovaton of cyclin p\proteins eg Cyclin D BY WAY of CDK4 or 6 binding.
If the R pointe is passed, then cells are generally committed to enter S phase. i.e. no going back
note: up to this point in G1, G1 and preparation for DNA synthesis is mitogen-independent, ie does not need biomeolecule promoting cell division eg growth factors
The G1/S checkpoint
iN OTHER WORDS it is a failsafe checkpoint, if issues are not detected earlier at restriction chekpoint.
Consists of molecular machinery e.g. CDK2 and cyclin E(overexpression, tumorigenesis, prognostic marker)
checksthe integrity of the genome.
This is important, as differences in the genome of teh resultant daughter cells would be an issue*
induces cell death i.e. apoptosis if DNA damage is detecte, prior to start of S phase
This stage of G1 is mitogen dependent
- G2/M checkpoint: associated with Cyclom A and CDK1. It ensures that chromosomes have correctly attached to the mitotic spindle.
- Molecular operators at the checkpoint can stall the kinetochore and arest cell division if aberrant chromosomal attachments are detected.
Describe factors that result in deviations of Hardy Weinberg equilibrium
There are some assumptions inherent in the Hardy Weinberg equation
- these are often not complete met in reality
- thus the predicted frequencies do not always directly correspond to the real frequencies
Assumptions listed below:
1. Random mating i.e. there is no preference for certain genotypes to mate with each other
2. No mutation i.e. the allele frequencies in the population remain constant from one generation to the next because there is no new mutation or deletion of alleles
- i.e. it does not consider subsequent genetic variation
- the frequency of p and q will always add up to 1
3. no migration
- the population is closed and therefore there is no gene flow i.e. transfer of alleles between populations
4. random selection
- no selective advantage and disadvantage for a subset of individual from the population (i.e. sexual selection)
5. no genetic drift
- no founder effect i.e. a new population is established from a larger population
- no population bottlenecks i.e. rapid reduction in population size leading to a loss of genetic diversity
Define the following terms: founder effect, bottlenecks, negative selection and selective advantage
Negative selection
- refers to a genotype diminishing over time if a genotype is lethal
- e.g. if qq is lethal, over time, q allele frequencies approaches zero, and becomes extinguished
An example of negative selection is DMD or Duchenne Muscular dystrophy:
- DMD is a recessive X-linked disease
- it affects 1/3000 males and is caused by a mutation in the dystrophin gene
- results include
- structural component of muscle cells
- mutations lead to muscle weakness and wasting
- unable to reproduce i.e. reduced reproductive fitness
- the DMD gene is the largest gene on the X chromosome and thus is vulnerable to mutations
- you would expect as males die, incidence of DMD would decrease with each subsequent generation i.e. negative selection
- but this does not occur, and incidence (and allele frequency remains constant)
The heterozygous genotype “Ss” confers a selective advantage:
- the Ss individual is resistant to malaria
- and has no anaemia i.e. no sickle cell disease
- note: HbS, and malaria incidence, co-occur ^[i.e. additional evidence for the selective advantage that the Ss genotype confers].
The founder effect
is a small group of individuals i.e. founders that establish a new population.
The genetic composition of the new population is altered, as compared to the original population. There will be over-representation of allele frequencies i.e. some alleles may become more common due to change events, and under-representation of other alleles.
Population bottlenecks
refer to a sharp reduction in the size of a population due to a random and catastrophic event.
- This is not only an example of founder effect, but also genetic drift ^[genetic drift]: the tendency for variations to occur in the genetic composition of small isolated inbreeding populations by chance. Such populations become genetically rather different from the original population from which they were derived. (Ox.)]
Genetics
Describe chromosomal abnormalities and provide examples
Aneuploidy refers to a numerical chromosomal abnormality; in other words, extra or fewer copies of homologous chromosomes.
Examples include:
- monosomy i.e. when one of two homologous chromosomes is missing. An example of this is monosomy 21. This is an incredibly rare disease. incompatible with life. ^[fyinterest: https://doi.org/10.1016/j.gene.2012.08.041]
- Uniparental disomy i.e. when two pairs of a homologous chromosome ^[(or part of a chromosome)] are inherited from one parent. Most UPDs result in no abnormalities in phenotype; however, if it occurs in meiosis II, rare recessive disorders may manifest in the child ^[ UPD should be suspected especially in cases where only one parent is a carrier of a recessive disorder, another parent isn’t, and the disease manifests in the child]. UPD can have a role in the etiology of imprinting disorders ^[read more?, and include a brief bit of mechanism]
- trisomy where three copies of a homologous chromosome are present. The classic case of trisomy is trisomy 21, which is the main cause of Down syndrome
Euploidy refers to alterations of complete sets of chromosomes ^[i.e. A euploidy can be either a chromosome loss or a gain in the chromosome sets.].
Di/tri/tetraploidy refers to gametes containing 2n, 3n, and 4n chromosomes; otherwise known as polyploidy, while monoploidy refers to the presence of only half of the normal number of chromosomes.
aneuploidies of autosomes have been discussed. However, these can also occur in sex chromosomes. Two more common examples include:
- Turner syndrome and Klinefleter syndrome
There are many types of chromosomal rearrangements include single chromosome structural changes: deletions (loss), duplications (gain), and inversion, and two chromosome structural changes: insertion and translocation (note that these are copy number neutral changes, along with inversion).
Duplications and deletions are a result of misalignment of homologous chromosomes. The result after crossing over is two unequal chromosomes: one with a duplication and one with a deletion i.e. one loss one gain.
Inversions occur when a chromosome loops in on itself, gaps are created and thus rejoined, resulting in an inverted sequence.
Translocations can either be reciprocal i.e. between non-homologous or any two chromosomes; or can be Robertsonian i.e. the joining of two non-homologous chromosomes
Genetics
Describe the modes of inheritance and provide examples
An inherited disease/disorder = presence of disease attributable to inheritance of a particular allele from a parent.
There are five basic modes of inheritance for single-gene diseases: autosomal dominant, autosomal recessive, X-linked dominant, X-linked recessive, and mitochondrial.
Also codominance: expression of both, phenotype blend e.g. ABO
Mitochondrial: mother to offspring
AD and X-linked dominance shows “balance”
Recessive traits show skipping between generations.
Describe RNA processing
RNA processing
Transcription is the process of producing a single stranded RNA molecule from the double-stranded DNA template. There are three main steps of transcription:
- initiation: the enzyme RNA polymerase binds to a DNA promoter region ^[appreciate: site to bind and start transcription encoded by RNA], encoded by TATAAT, which is recognised by the RNA polymerase protein complex, and RNA polymerase begins to unwind ^[does it do this itself? yes] the DNA double helix
- elongation (start from small and get to big RNA molecule): RNA polymerase moves in a 3’ to 5’ direction along the template strand of DNA and synthesises a pre-mRNA, catalysing its production in the 5’ to 3’ direction
- termination: RNA polymerases release the pre-mRNA at the transcription termination site ^[appreciate: site to end transcription encoded by RNA]
‘reads from 3 to 5, writes from 5 to 3’
NOTE: prior to translation, the pre-mRNA undergoes post-transcriptional RNA processing. This mainly involves splicing, which is the process of removal of introns (non-coding regions) from pre-mRNA by specialised enzymes, leaving behind only the coding regions or exons. Introns are usually degraded during RNA processing but can be retained and give rise to regulatory RNAs.
The overall purpose of splicing is to increase the functional diversity of RNAs. In this way multiple proteins and modifications of the same protein can be generated from the same gene, which can carry out various functions in different cell types ^[examples: Fas receptor isoforms, membrane bound, increased in skin cells exposed to sun, presumed protective role against cancer; development of complex organisms such as humans; IgM (first antibody in response to antigen), roles in autophagy [[Cell Biology Lecture 3]], apotosis, protein localisation, enzyme activities, lignad interactions, TF activity and mRNA abundance…see intro of https://doi.org/10.3389/fpls.2019.00708]
Describe examples of oncogenes and how they contribute to cancer
Oncognes are gnees that have the potential to cause malignancy when mutated.
An example of an oncogene in Myc
Mutations in the myc gene result in gain of function transforming it from a proto-oncogne into an oncogene
Describe patterns of mitochondrial DNA inheritance
Leber’s Hereditary Optic Neuropathy (LHON)
* Increase prevalence in maternal relatives
* Chain of transmission ends when a father
is affected
* Pattern of maternal inheritance
- Mitochondria
- 100000 mitochondria/egg
- 100 mitochondria/sperm
- Highly debated if any mtDNA is transferred to offspring from the father
- At best it is 1:1000 (possibly negligible)
- Incidences of paternal leakage of mtDNA (Schwatz and Vissing (2002) – muscle
tissue). - Therefore only maternal mitochondrial inheritance occurs
Mechanisms of paternal mtDNA degradation: active degradation
* Most of the mitochondria in the sperm are located in the tail
* After fertilisation the tail of the sperm is directed towards degradation
mediated by endocytic pathways
* Exponential cell division results in the dilution of the mitochondria
originating from the embryo
Describe the process of mitochondrial genome replication
- Twinkle (DNA helicase) binds to OH region of the mtDNA and unwinds the DNA duplex
- DNA polymerase gamma (POLG) synthesizes the H strand continuously
- As the H strand is copied, Mitochondrial single-stranded DNA-binding protein (mtSSB) binds to the
parental H strand and prevents its degradation and binding to the L-strand to reform the DNA dumplex - When POLG arrives at the OL region, a stem loop is form and prevents the binding of mtSSB.
- RNA primers synthesized by POLRMT bind to the stem loop thus allowing the initiation of transcription of
the Light Chain by POLG - RNA primers are removed, and synthesis is completed at the primer binding regions.
Describe importance of DNA replication, the components involved, and the steps of DNA replication
There is a continuous need for cell division as they continually grow old and die, or are otherwise lost, and must be replaced. DNA replication is the process of producing an exact copy of genetic material from a template. DNA replication must occur with every cell division in order to ensure that each subsequent cell contains the same amount of DNA.
NOTE: DNA polymerase can only add bases in the 5’ to 3’ direction.
The replication machinery consists of a few components. They are:
- helicases: which unwind the DNA
- primases: which synthesise short RNA primers that serve as starting points for DNA synthesis
- DNA polymerase: enzymes that move along the strand in a 5’ to 3’ direction and synthesise a new complementary strand base by base
- on the leading strand i.e. the 3’ to 5’ strand, synthesis is continuous
- on the lagging strand i.e. the 5’ to 3’ strand, synthesis is discontinuous and forms short Okazaki fragments
- the gaps between the Okazaki fragments are filled in by DNA polymerases and are then linked by ligase
Describe post translational histone modifications
The aims of post-translational histone modifications are three, they aim to:
- alter the net charge of histones
- alter inter-nucleosomal interactions
- provide a platform for chromatin-binding proteins that alter chromatin compaction
Examples of post-translational modification:
- acetylation
- methylation
- phosphorylation
- sumoylation
- ubiquination
Describe the components of the histone complex
Histones
Histones are highly expressed proteins found in eukaryotic cell nuclei, that package and order DNA.
Like all proteins, histones can have variants, altering their normal function.
The various types of histones include:
- H2A, H2B, H3 and H4 are core histones
- H1/H5 are linker histones
The histone complex that binds DNA contains:
- 2x H3-H4 dimers
- 2x H2A-H2B dimers
- 8 histones total i.e. an octamer
Variants will bind to different regions of the DNA and therefore alter gene expression.
Chromatin is the combination, or complex, of DNA and proteins, that together make up the contents of the nucleus of the cell.
- heterochromatin - dense (genes are silent)
- euchromatin - light (genes are active)
The accessibility of the genes (dependent on packaging of the chromatin) is directly related to the level of their expression/activity:
- if gene accessible i.e. genetic material is naked duplex DNA, not packaged, it is considered active, and it is highly expressed
- if gene is less accessible, it is still considered active, but expression is modulated
- if gene is inaccessible e.g. packaged tightly in mitotic chromosome, it is considered inactive, and there will be no expression of the gene
Side note on histone variants:
“Despite a conserved role for histones as general DNA packaging agents, it is now clear that another key function of these proteins is to confer variations in chromatin structure to ensure dynamic patterns of transcriptional regulation in eukaryotes.”