B1

Question 1

Why is jewelry dangerous

Answer 1

Could cause a burn, an electrical shock or could make you lose your finger

Question 2

What class hard hat is required

Answer 2

Class E

Question 3

When do you need to wear safety glasses

Answer 3

Working on live equipment, using cutting pliers, using a hand drill

Question 4

When do you need to wear safety goggles

Answer 4

when drilling or chipping concrete stone or metal, using a power activated tool

Question 5

When should you wear a face shield

Answer 5

Using a grinder ​

Using a drill press ​

Using compressed air for cleaning​

Filling batteries

Question 6

How often should you check rubber gloves for pinholes or damage

Answer 6

before every use

Question 7

Above what height should fall protection be used

Answer 7

3m or 10ft

Question 8

What characteristics do guard rails need

Answer 8

Must be 40 – 44” above the work surface ​

Consist of Top Rail, Mid Rail and Toe Board ​

Be able to resist 125lb horizontal load

Question 9

What does fall restraints system do

Answer 9

Stops you before you can fall off with a belt or harness

Question 10

How high can fall arrest let you fall

Answer 10

1.2m or 4ft

Question 11

what are the different parts need in fall arrest

Answer 11

Full body harness ​

Lanyard ​

Lifeline

Rope Grab​

Snap Hook (must self lock)

Question 12

How far are you allowed to fall with shock limiting device on fall arrest

Answer 12

additional 2m so 3.2m or 10ft

Question 13

How strong and how many people can be on vertical lifeline

Answer 13

6000lbs. 1 person

Question 14

How strong and how many people can be on horizontal lifeline

Answer 14

20 000lbs, 3 people

Question 15

How big must a control zone be

Answer 15

at least 2m

Question 16

How often should safety meetings happen

Answer 16

At least weekly

Question 17

6 different confined spaces

Answer 17

Storage tanks​

Silos​

Vessels​

Sewers​

Vaults ​

Vats

Question 18

Dangers in confined spaces (6)

Answer 18

Lack of oxygen​

Poisonous gas build up​

Liquids and solids can suddenly fill the space​

Flammable residue ​

High concentrations of dust ​

Hot conditions

Question 19

Why is a standby person required for confined spaces

Answer 19

so they can call for help in an emergency

Question 20

What is the ladder ratio

Answer 20

4:1

Question 21

How far above surface does ladder need to be if you climbing onto roof

Answer 21

1m

Question 22

Why is workplace safety important for employers?

Answer 22

Workplace accidents cost money, so it’s in the employer’s best interest to maintain safety.

Question 23

What are emergency shutoffs used for?

Answer 23

They are installed around rotating equipment to allow quick action in case of injury or electric shock.

Question 24

What is essential about fire control systems?

Answer 24

Employers must ensure workers know where fire extinguishers are and how to use them.