AWAT 1 Flashcards
Automated management systems -the work order is used for tracking and documentation of scheduled and unscheduled maintenance such as troubleshooting, removal and replacement, repair and inspections.
NALCOMIS
The work center supervisor will assign a worker, and place the work order in work. The worker name, tool box number, and start date will be filled in.
Work Order Processing-In Work
Consist of 3,5 or 7 alphanumeric characters that identifies the system or subsystem being worked upon.
The Work Unit Code (WUC)
Collection, analysis and use of pertinent data to continuously improve material readiness and safety at least possible cost
NAMP
- quality assurance monitors the FOD program
- monitors the FOD prevention program through work center audits and inspections
FOD Prevention Program
All maintenance personnel are required to inventory tools
Tool Inventories
Factors affecting safety mishaps can result from an improper level of supervision or a failure to require personnel to meet personnel qualification standards
Safety
A hook, cane or strap is used to remove someone who is being shocked from the power source.
Emergency and Safety Equipment
Apron required When handling chemicals that poses splash hazard
Body protection
- Only work on, operate or adjust equipment if you are authorized to do so.
- Use proper tag-out procedures for regular and preventive maintenance.
Safe maintenance practices
To provide equipment with common potential reference points anywhere in the system, so that no stray voltage exist between any two points
Purpose of GROUNDING
Who approves the JCN
Maintenance Control
Required to handle tires and wheels with the same care as that given to live ordinance.
Tire & Wheel
Work surfaces Floors Clothes Chairs Packaging & Handling
Common sources of Electrostatic Discharge ESD
Grounding of aircraft prior to any loading/downloading of ordinance
Ordinance Safety Precaution
Allow the brake assembly to cool in circulating air
Hot Brakes Procedure
If acid or electrolyte from a battery touches your skin or eyes, flush the affected area with large qualities of fresh water, report IMMEDIATELY for medical examination and treatment.
Battery Safety Precaution
What is the the listing of all authorized HAZMAT allowed to be used in the division.
Authorized Use List
Because of the strength and durablity of composite materials, they are widely used in advance aircraft to replace HEAVIER METAL components
Function and Purpose
Wipe with isopropyl alcohol, wash with mild non abrasive soap & water, apply a lanolin-type hand cream.
How to clean your hands
If an object moving with uniform speed is acted upon by an external force, the change of motion, or acceleration, will be directly proportional to the amount of force and inversely proportional to the mass of the object being moved.
Newton’s Second Law of Motion
Yaw- is the left or right heading change of the aircraft. The vertical axis is the pivot point about which the aircraft changes heading left or right.
Aircraft Movements
A severe thunderstorm warning means that thunderstorms with wind gust to 50 KNOTS or 3/4 HAIL DIAMETERS is forecast to impact the warning area.
Adverse weather conditions
VF- Fighters- attacks aircraft and ground installations to defend surface units. Provides escort support for attack aircraft and close air support for landing.
Aviation communities