Avionics Flashcards
How can the pilot change the LH PFD altimeter setting from inches to Hectorpascals
A. Access the inches/Hectorpascals menu through the MFD menu bezzle control buttons
B. press the IN/HPA button on the pilot’s PFD controller
C. Press the IN/HPA button on the MFD controller
D. IN or HPA cannot be changed by the pilot
B
The function of the comparison monitor is
A. to test the wraparound function of the PFD
B. to alert the crew to problems between the 2 fms units
C. to alert the crew to discrepancies between displayed data in the PFD i.e. Airspeed altitude attitude etc
D. all of the above
C
Resolution advisory RA commands are
A. Presented in the MFD
B. presented as vertical speed commands in the PFDs
C. presented as vertical speed commands in a TCAS indicator
D. presented as pitch commands in the PFD’s
B
The flight director can be selected off by
A. diselected I do selecting all of the modes on the flight director mode selector
B. pressing STBY on the mode selector
C. selecting STBY from the PFD drop down menu
D. it is not possible to select the flight director to STPY
A
Is an Amber DN or UP indicator on the autopot control panel indicates
A. the auto pilot is trimming the ailerons
B. A sustained trim input is being applied to the elevator servo
C. the autopilot should not be engaged
D. both B & C
D
Select the true statement
A. the aircraft may be dispatched with an inoperative standby flight display
B. the aircraft may be dispatched with certain static wicks missing
C. the aircraft may be dispatched with the RH PFD inoperative
D. the aircraft may be dispatched in IMC conditions when the RADON FAN annunciator is illuminated flashing
B
Select the true statement for an autopilot coupled back course approach
A. The backhorse must be set in the CDI and the beast BC mode of the flight director must be selected
B. The front course must be set in the CDI and the BC mode of the flight director must be selected
C. The back course must be set in the CDI and the APR mode of the flight director must be selected
D. The front course must be set in the CDI and the APR mode of the flight director must be selected
B
How can the left pilot PFD be displayed on the MFD in the event of a blank display.
A. Turn the MFD dim knob to off
B. turn the right copilot PFD dim knob to off
C. turn the left pilot dim knob to off
D. pull the PFD1 circuit breaker
C
The standby HSI receives heading input from the. ___ and nav inputs from the ____
A. No. 2 AHRS, No. 1 NAV
B. No. 1 AHRS, No. 2 NAV
C. No. 2 AHRS, No. 2 NAV
D. No. 1 AHRS, No. 1 NAV
A
Is the pitch wheel on the auto pilot controller is used to
A. change the pitch attitude during basic auto pilot operation
B. change the commanded vertical speed while in VS mode
C. change the commanded airspeed or mach while in FLC mode
D. all the above
D
