AV Control Panel Flashcards
Whenever the measure of fuel and calculate if you are between 25 and 170 L, which fuel indication is displayed on the AV control panel fixed fuel display, next to the bus voltage report, – measured fuel or calculated fuel?
Which ever amount is lower
What fuel indications is displayed on the AV control panel fixed fuel display, next to the bus Voltage report when the fuel is below 25 L or above 170 L or measured or calculate, why
Calculated, because the fuel level sensor is only measure between 25 and 170 L
What color indicates the reports are within the normal range on the AV control panel
Green
What color indicates the reports have extended the normal range but have not entered the alert range on the AV control panel
Brown
What color indicates the reportsI have exceeded the normal and caution ranges of the AV control panel
Red
What data does the IFF mode C provide to ATC
Altitude
Which sensor mode selection forces the aircraft to use the flux of valve unit FVU to sense heading
DMU Forced
What are the available options for navigation mode selection in the system dialogue
Auto, INS primary, GPS, Data link, and dead reckoning. Note data link is not used
Which system window drop-down menu allows changing from AVC1 to AVC2?
MCPA mode
The OSGCS calculate magnetic declination, intonation and total flux based on
Commanded pedestal position
In order to send IFF mode 1, 2, and 3A codes to the aircraft, you must select
Load IFF code to aircraft button and the IFF dialogue
Data entry dialogue keeps the BCS clock synchronize with?
Aircrafts downlink GPS time
Which VCS dialog displays the aircraft Calculator wind speed, direction, and air temperature?
Met data
Meteorological
What is the VCS dialogue do we use to determine if the aircraft INS has gone into nav mode?
INS – GPS initialization
The wind table dialogue interpolates and extrapolates the wind speed, Direction, and temperature based on?
The values that were entered
