auto fires, electrical hazards, metro rail Flashcards
LAFD TB 5 Auto fires, the following are considerations to be included a proper size-up and implementation of apparatus placement. Uphill, upwind, personnel protection, warning devices and _____
water supply
LAFD TB 5 Auto fires, the ground cable (battery) can be identified as the one attached to the _____
vehicle body/frame
LAFD TB 5 Auto fires, *mechanical energy absorbing bumpers employ a heavy spring to absorb impact. these units travel up to _____ inches
4
LAFD TB 5 Auto fires, *hydraulic energy absorbing bumpers are filled with a mixture of nitrogen/helium gas pressurized to _____ and a hydraulic fluid chamber. They can travel up to _____
150 psi / 3”
LAFD TB 5 Auto fires, when heated to the point of decomposition, freon gas used in air conditioners can produce what two toxic gasses _____ and _____
phosgene and fluoride
LAFD TB 5 Auto fires, the flash point of gasoline is _____
- 45
LAFD TB 5 Auto fires, what percentage of the LAFD responses involve motor vehicles
20%
LAFD TB 5 Auto fires, there is an explosion hazard associated with the battery due to the presence of what gas _____
Hydrogen vapors
LAFD TB 5 Auto fires, what protective equipment needs to be worn when working in the engine compartment
( *battery ) _____ or SCBA facepiece
safety goggles
LAFD TB 5 Auto fires, when disconnecting the battery cables, which cable should be disconnected first _____
the ground cable
LAFD TB 5 Auto fires, what is the leading cause of fires in an engine compartment _____
fuel system malfunction fuel line rupture and pump continuing
LAFD TB 5 Auto fires, for fires involving dash instrumentation, disconnect the electrical power and treat as a class _____ fire
A
LAFD TB 5 Auto fires, what is the usual cause of tire fires _____
overheated brakes and/or underinflation
LAFD TB 5 Auto fires, the flash point of diesel is _____
125
LAFD TB 5 Auto fires, the effective range of a dry chem 20lb extinguisher is _______ to _____
15 to 20 feet
LAFD TB 5 Auto fires, flow of LPG piping can be controlled by _____ found on storage cylinder
closing valves
LAFD TB 5 Auto fires, how many feet constitutes working in IDLD
30’
LAFD TB 8 electrical hazards, high voltage signs on cross arms indicate conductors with more than _____ volts
750
LAFD TB 8 electrical hazards, in certain areas of the City of Los Angeles, the DWP installed underground electrical cables and transformer vaults instead of overhead wires. during an electrical vault fire, manhole covers that weigh _____ pounds have been blown _____ feet into the air and a distance of _____ feet
300 lbs 75 feet and 125 distance
LAFD TB 8 electrical hazards, the most effective methods of identifying different voltages are: 3 ways
signs on the cross arms, size and shape of the insulators, distance between conductors