Assignment - Gears & Variable Speed Drives Flashcards
What are the two types of gear drives?
a) open gear drives
b) enclosed gear drives
Two gears meshed together with different number of teeth. The gear with the lower number of teeth is called the _____ gear.
pinion
Is there a mechanical advantage in a direct drive gear box?
No - direct drive is when the input speed of the gearbox is the same as the output speed. These drives are used for transfer of power with no increase or decrease of speed or torque.
In a speed increaser gear box, the drive gear is bigger than the driven gear.
a) true
b) false
a) true
What is the minimum number of shafts and gears needed to be called a compound gear train?
3 shafts
4 gears
What three things are necessary for gears to mesh?
- same diametral pitch
- same pressure angle
- same helix angle
What is an overhung gear?
An overhung gear has a bearings support on only one side.
The number of teeth on a gear divided by the pitch diameter will give you…..
DP - Diametral Pitch.
A gear set with a pressure angle of 20 degrees is stronger than a gear set with a pressure angle of 14.5 degrees.
a) true
b) false
a) true
What are the 3 basic shaft arrangements?
- Parallel
- Intersecting
- Cross over at 90 degrees
What are three basic spur gear arrangements? Which one has the two shafts rotate in the same direction?
- External
- Internal
- Rack & Pinion
Internal arrangement has two shafts rotating in the same direction.
What is the ratio of mitre gears?
1:1
What are two advantages to using double helical gear drives?
The advantage of using double helical gears is that the axial thrust is cancelled out by the opposite row of teeth. These gears are very good for heavy loads and high speeds.
What are 3 types of bevel gear sets?
- straight bevel
- spiral bevel
- zerol bevel
What worm and wheel arrangement gives the maximum tooth contact?
- double throated gear set