APU STDY 02: 1-1-1 Preperation Flashcards

1
Q

STEP 1 of APU OPERATION PROCEDURES?

A

The operator must be familiar with the emergency shutdown procedures

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Be prepared to shut down the APU immediately if…

A
  • If the FIRE warning light comes on or a situation is observed which requires immediate shutdown.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Double Hearing protection is required when operating or within 50 ft of an operating APU
What are the AFOSH Standards for hearing protection while a/c systems are running?

A

0-84 NONE
85-109 SINGLE
110 & up DOUBLE

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Search radar, NVIS system, wing isolation valve switches and all other aircraft system switches should be in what position?

A

OFF or NORM

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Prior to operating the APU or applying electrical power to the airplane…

A

check the forms (AFTO forms 781) to be sure no condition exists which would prohibit operation of the APU.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Prior to first start of the day why do you make sure the the APU fuel shutoff valve is operating properly?

A
  • DAMAGE to equipment and injury to personnel could result.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Why do you not operate APU if the APU fuel shutoff valve is not operating properly?

A
  • DAMAGE to equipment and injury to personnel could result.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

How do you know if the fuel SOV is not operating properly?

A

. If STEADY flow continues, APU fuel shutoff valve is stuck open and must be repaired before continuing)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What position is the Engine condition lever is prior to start?

A

Engine condition lever to GND STOP position.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

AIR DEFLECTORS sw’s are in what position prior to start?

A

AIR DEFLECTORS sw’s are in the OFF position.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

AIR DEFLECTORS sw’s are in what positoin prior to start??

A

AIR DEFLECTORS sw’s are in OFF position

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

DC Ground bust tie switch in what position prior to start?

A

DC Ground bust tie switch in tied position

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Turn on UHF radio and set to ground control frequency to provide emergency Turn on UHF radio and set to ground control frequency to provide…

A

emergency communications

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Why do you turn the UHF radio on prior to start?

A

Preform Radio Check to establish ground communications.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Operation of the APU in sandy, graveled, or loosely surfaced areas may cause….

A

foreign objects to be drawn into the APU.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

DO NOT operate the APU if ice is found…

A

on the inlet door or foreign objects are found around the APU. IT IS OKAY to operate the APU with FROST on the inlet.

17
Q

If APU fire warning system is inop can you operate the APU using a fire guard?

A

No- if the APU fire warning system is not operating properly DO NOT OPERATE THE APU.

18
Q

Remove Plugs. What are the plugs you remove for?

A

APU exaust & cooling air inlet

19
Q

If the APU fire warning system is not working properly…

A

DO NOT operate the APU

20
Q

Place ENG FIRE TEST TST sw to TEST/TST. Verify FIRE/FIRE indicator warning light and warning light in APU fire control handle. Do both lights come on? And after you verify the lights where do you place the ENG FIRE TST sw?

A

BOTH lights come on. Place ENG FIRE TST sw to NORMAL.

21
Q

Place ANTI ICE OVERHEAT CIRCUIT TEST sw to the test position. VERIFY…

A

all applicable warning lights illuminate. (7 lights for the 130H)

22
Q

Place BLD AIR sw to…

A

CLOSE/OFF

23
Q

Place pilots light panel MSTR sw…

A

NORM position

24
Q

Place pilots light panel MSTR sw…

A

NORM position

25
Q

Why should personnel should keep clear of APU door at all times?

A

Door may close and cause injury

26
Q

Why should personnel should keep clear of APU door at all times?

A

Door may close and cause injury

27
Q

After making sure APU door is clear

A

switch to RUN

28
Q

After making sure APU door is clear

A

switch to RUN

29
Q

If the door fails go to ... Otherwise go to ..,

A

If the door fails go to 1-1-2. Otherwise go to 1-1-4.

30
Q

If the door fails go to ... Otherwise go to ..,

A

If the door fails go to 1-1-2. Otherwise go to 1-1-4.