Ammunition Weapons Support Equipment (AWSE) and Handing Questions Flashcards
What is the maximum SWL of the Mk3 Mod 0 pallet?
4,000 pounds
An Mk 12 Mod 1 pallet is ___________ long and __________ wide?
45.5 inches, 35 inches
An Mk 43 Mod 1 is used with what weapons carrier to lift Mk 82/BLU 111 bombs tandem?
Mk 49 Mod 1
What is the maximum SWL of the Mk 49 Mod 1 weapons carrier?
2,500 pounds
An Mk 51 Mod 1 weapons carrier has what total number of lifting eyes?
Six
How many interchangeable and interlocking 49-inch sections makeup the A/F32K-1A Bomb Assembly Stand?
Three
On A/F32K-1A what does the tray permit for the weapon assembly and disassembly?
Provides the total weight of the weapons being assembled
To use an HLU-256/E manual hoisting bar in a tee configuration, you should perform what action?
Relocate the nose plug into a position at the bars midpoint
An AERO 39C adapter has a total of how many tubes?
Seven
An AERO 39C adapter is used with what bomb skid?
AERO 9C
What adapter is used to transport wings, fins, and fuzes?
ADU-488/E
The brakes on an MHU-191/M are activated by what device?
A brake lever
A standard four-way wood pallet has what maximum SWL?
4,000 pounds
What publication prescribed the minimum requirements and regulations on ammunition afloat?
NAVSEA OP 4
What publication supplies data on HERO and the hazards of RF, laser, and ionizing radiation (NAVSEA and NAVAIR Publication number)?
NAVSEA OP 3565/ NAVAIR 16-1-529
To what publication would you refer for information on the assembly of missiles?
NAVAIR 11-140-6.1/6.2/6.3
What instruction governs the Ordnance Certification program?
OPNAVINST 8023.24
What person ensures the appropriate HERO condition has been set?
Operations Officer
What is the definition of a NALC?
Naval Ammunition Logistics Code, a four digit code assigned by SPCC
The missile serial number is located where on the AIM 9X?
The aft end of the missile
Where is the missile serial number located on the AGM-84 HARPOON missile?
Warhead
What is to be done after you break the hermetic seal on a container containing CADS?
Use indelible ink and mark the open date on the outside of the container and on each CAD inside the container.