Amateur radio signals Flashcards
Which type of modulation is most commonly used for VHF and UHF voice repeaters? (T8A04)
FM
What type of modulation is most commonly used for VHF packet radio transmissions? (T8A02)
FM
Which of the following is a form of amplitude modulation? (T8A01)
Single Sideband (SSB)
Which type of voice mode is most often used for long-distance (Weak signal) contacts on the VHF and UHF bands? (T8A03)
SSB
Where may SSB phone be used in amateur bands above 50 MHz? (T2B13)
In at least some portion of all these bands
Which sideband is normally used for 10 meter HF, VHF, and UHF single-sideband communications (T8A06)
Upper sideband
What is an advantage of single sideband (SSB) over FM for voice transmissions? (T8A07)
SSB signals have narrower bandwidth
What is the approximate bandwidth of a single sideband (SSB) voice signal? (T8A08)
3 kHz
What is the approximate bandwidth of a VHF repeater FM phone signal? (T8A09)
Between 10 and 15 kHz
What is the typical bandwidth of analog fast-scan TB transmissions on the 70 centimeter band? (T8A10)
About 6 MHz
What type of transmission is indicated by the term “NTSC?” (T8D04)
An analog fast scan color TV signal (National Television Standards Committee)
Which of the following types of emission has the narrowest bandwidth? (T8A05)
CW
What is the approximate maximum bandwidth required to transmit a CW signal? (T8A11)
150 Hz
What code is used when sending CW in the amateur bands? (T8D09)
International Morse
What is an electronic keyer? (T8D14)
A device that assists in manual sending of Morse code