Advanced DC Flashcards
What lengths of exhaust trunks for the RAMFAN 2000 do we have onboard the THD?
What is a strongback?
Setup to distribute pressure
Whose permission do you need to align an eductor?
CO
Where can you find a list of all the tanks and voids?
RPM (Repair Party Manual)
Which is a type of direct compression shoring?
I type
What is considered progressive flooding?
When water enters another space
Where onboard can you find shoring?
Outside of each repair locker
What product do you apply to a sounding tape to check for fluid in a tank?
Nothing
What is the treatment for shock?
Elevating the feet higher than the head and keeping the victim warm
What is the maximum allowed pressure on a soft patch?
150 psi
What are the sizes of the overboard discharge connections?
2.5 inch and 4 inch
“Practical DC” can be found on NSTM ___?
079 Vol. 2
What is the primary and secondary purpose of the P-100?
Dewatering and back up firemain
What is the maximum allowable pressure for EWARP?
150 psi
You must push down the __ on the P-100 prior to pulling the cord to start.
Throttle
What are the three areas of a carpenter’s square?
Body, tongue, and heel
T/F; Ruptured AFFF piping is considered a hazardous material spill
True
EWARP can be aligned to which of the following piping?
None
Which hoses are used with the P-100 as suction hoses?
Black non-collapsible hose
At a minimum, how many complete wraps of duct tape are needed to connect the RAMFAN to the exhaust trunks?
4
T/F; The goal for desmoking is to remove 95% of the smoke with fresh are?
True
When shoring is erected, what must you provide?
Shoring watch
How do you stop a progressive crack/split seam?
Drill 1/4 inch hole at both ends of the crack
What is the maximum length of a wood shore?
30 times the minimum butt thickness