A+exam6 Flashcards
You support an old impact printer at work. When the printer prints, there is always a blank horizontal line in the middle of each line of output. What is the most likely cause of the problem?
The print head needs to be replaced
If you have consistently faded printing the what is old?
print ribbon
if you get light and dark printing then what ?
ribbon is not advancing properly
When installing Windows, you can control telemetry data. In which step during setup is this configured?
Privacy settings
Disk partitioning
configured during the initial installation
to direct windows where to install
Account creation
first user on the OS
What is the last step that should be performed when removing malware?
educate the end user
what is the first step in the malware removal process
Investigate and verify malware symptoms
what is one of the lasts steps of the malware removal process?
Enabling System Protection
what should be performed after you remediated the malware?
Scheduling scans and running updates
A user on your network wants to be able to draw images on a screen and have the laptop capture them. What type of device needs to be installed on the user’s laptop?
Digitizer
Inverter
changes DC power into AC power for a display backlight
Touchpad
device allows a user to control the mouse cursor
You have been asked to install a network cable that offers the greatest level of resistance to electromagnetic interference (EMI). Which of the following network media would you select?
Fiber-optic
The process by which the processor slows down to conserve power is officially called ____________.
Throttling
Which of the following most accurately describes what a PRL is?
The list of cell phone towers a mobile device should connect with while roaming
preferred roaming list
Under which circumstance will Windows 10/11 boot into the Windows Recovery Environment?
After two failed attempts
Windows 7 and prior operating system will prompt with a what?
boot menu if the f8 key is pressed during bootup
When a blue screen of death (BSOD) occurs, the system will reboot, but it will not boot into the
Windows recovery environment
Pressing F12 during the power on self test(POST) will allow what?
you to enter the BIOS or alter the boot process depending on the BIOS TYPE