70 Questions Flashcards
Which two servers support RAID 5 configuration for CM 6.0 (Choose two).
S8800 Server w/12GB RAM.
S8510 Server w/8GB RAM.
When troubleshooting a system fault. If the web interface SAT are unavailable, which method should be used?
CLI
Hunt group 99, with ext. 4199, is administered for messaging.which command needs to be executed at the SAT terminal to trouble shoot hunt group 99?
List trace hunt-group 4199.
A customer needs to setup SIP integration on Communication Manager Messaging Application 8.0. What are three pieces of information that are needed to meet this requirement? (Choose three)
SIP domain
Transport Method
Extension Length
Which three are bests that can perform to verify a Communication Manager Messaging 6.0 application is working property? (Choose three)
Verify the Hunt Group status
Call the Messaging Hunt Group
Check the Messaging
On a media gateway G450, which slots are permitted for the MM342?
V3 and V8
A customer is planning to upgrade from CM 5.X to CM 6.0 on an existing S8510 server. What is the total minimum memory requirement for this upgrade?
16GB RAM
Which screen is used while upgrading the system platform from Release 6.0.0.09 to Release 6.0.0.11?
Console domain>Server>Platform Upgrade
Which three statements about CM_Duplex template CM 6.0 are true? (Choose three)
Software duplication is available. But hardware duplication is not offered.
The S8510 Server is not used for duplication
Server duplication is configured via “Failover” option on CDOM’s web interface
Which Gateway command resets the Gateway back to factory default?
nvram init.
A technician wants to test and see if the voice channel between two IP phones is shuffled. Which command in SAT can be used to determine the type of IP connection! And to check if the voice channel is shuffled?
Status station 1234
Which Ethernet port on S8800 server is used for server duplication?
ETH3.
Which three components are part of Avaya Aura CM_survRemote_Embed template? (Choose three)
Utility Services
CM 6.0
Session Manager 6.0
A technician is planning to upgrade an Avaya CM system to Release 6.0 from Release 5.2. Which two tasks must be performed during the upgrade procedure? (Choose two)
The S8700 series servers must be replaced by S8800 servers
The Survivable Remote servers must be upgraded to Release 6.0
In the navigation pane, what are the steps to create a test mailbox on the CM M 8.0 Application?
Select Messaging Administration then Subscriber Management, and then click Add or Edit
When configuring a G450 MG, which two port setting must be set? (Choose two)
100MB port speed
Full Duplex
A switch admin wants to busyout trunk 53 for maintenance and administration work however, there is one call active on port 5 of the trunk. Which command should be executed from the SAT to find outIP addresses and ports of the near-end node of the audio connection?
Status trunk 53/5
Which three objects can be downloaded from the Product License Delivery System (PLDS)? (Choose three)
Patches
Firmware updates
CM Templates
Which two statements describe the new procedures that a customer can use to directly and permanently turn ON or OFF licensed features in CM 6.0? (Choose two)
Customers can turn features ON or OFF using the change system parameters customer-options command on the SAT
Customers can turn features ON or OFF using the System Management Interface Administration page
Which statement describe the action to assure the CM_SurvRemoteEmbed Template was installed correctly?
From a browser logged into the System Management Console, verify CM. bsm, and utility_server appear and the Application State is running
Which three statements about CM 6.0 is deployed as a Feature Server are true? (Choose three)
It supports G450/G430 gateways
It supports SIP telephones
It supports SIP trunks
When using the SA GEDI interface, which command would be used to check the configuration of a telephone set with the ext. of 1000?
Display station 1000
A customer is migrating an older communication system to CM 6.0. They must upgrade device to the latest available firmware and servers to the latest available CM software. The list in the exhibit are the devices that need to be upgraded. What is the proper upgrade sequence?
1.3.5.4.2.7.6
Which three statements are true for a configuration that consists of duplicated S8800 main servers with a duplicated port network and a survivable core? (Choose three)
Software duplication exists between the two main S8800 servers
The two main servers have duplicated IPSIs
The two main servers share a single control network
A technician has installed a pair of duplicated S8800 servers withIPSI duplication. Which two procedures indicate that the duplicated IPSI’s are both operational? (Choose two)
The Enable Operation of IPSI Duplication field on the display system-parameter duplication form is set to “Y”.
Execution of the the test ipserver-interface command for both IPSI circuit packs shows “PASS” in the results column
What are the recommended CLAN and MEDPRO port settings?
100Mbps full duplex
Which two statements are true regarding a MG fall tack (recovery) to the main (primary) server? (Choose two)
The list survivable-processor command can be used to confirm that the survivable server is registered to the main server and that the remote survivable is no longer active
Executing the status media-gateways command from the main server will show which media gateways are registered with the main server
To confirm that a survivable server is currently registered to the main CM server, using the SAT, which command should be entered?
Status survivable-processors
A customer wants to enable audio encryption for IP phone calls, but the option is not available on any ip-codec-set. Which procedure must be followed to obtain this feature?
From the SMI Feature Administration page, find the Media Encryption over IP field set the option to “Y”. Save the change
Which statement describes the action to assure the system platform was installed correctly?
After connecting to the server using PuTTY and logging in as root, verify there are no errors when running the xm list command
Which statement is true about duplex servers in CM 6.0?
The main and all survivable server require an authentication file
System Platform webconsole is used to apply the service pack for which three virtual machines? (Choose three)
System Platform
AES 6.0
CM 6.0
Which procedure must be followed while migrating from CM 5.2.1 (S8800 Server w/2 HDD) to CM 6.0?
Take backup, store the backup locally, insert 3rd HDD, and then run RAID CD after rebooting
Which Communication Manager 6.0 command is used to add a new survivable cone server so that it would register with the Main server?
Add survivable-processor
Which Ethernet port on S8800 server is connected to the customer network?
ETH0
When using the Avaya SA GEDI interface, which command would be used to build a new telephone set with the ext. of 1000?
Add station 1000
Which two components are part of the Avaya Aura CM_Simplex template? (Choose two)
Utility Services
CM 6.0
When using the Avaya SA GEDI interface, which command would be used to confirm that MG 3 is registered
Display media-gateway 3
For Avaya Aura CM 6.0, how is the License file installed on the server?
Using the Web Interface of Console Domain
Concerning the type of Integration with CM, on the Navigation Pane, where is the Communication Manager Messaging 6.0 Application mentioned or configured?
Click Switch Link Administration, then Switch Link Admin, and then Switch Integration Type field
A small enterprise customer needs 445 SIP/H.323 users. Which CM 6.0 template will be the most economical solution?
CM_onlyEmbed
For duplex S8800 servers running CM 6.0 by default, which Ethernet port communicates with IPSIs?
ETH0
When configuring a G450 MG using the gateway CLIminterface, which command would be used to view the serial number and software status?
Show system
Which three elements are needed to add a CLAN IP interface? (Choose three)
Gateway node name
Node name
Link
Which three procedures are used to determine whether a gateway with a survivable remote server has lost it’s H.248 link (connection) to the main (primary) server? (Choose three)
Execute themCM command display alarms, to see whether the Link Loss Delay timer has expired
Execute the SAT command list media-gateway from the survivable server, to determine whether the media gateway is registered with a survivable server
Execute the SAT command status media-gateways, to determine which media gateways are not registered to the main server
A user at ext. 1111 complains that when dialing ext. 2222, the call is xxxxxxxx made are connected as expected, there is not a display on the phone while at the xxxxx. Which command identifies the reason this phone call is behaving in this unexpected xxxxxxxxx?
List trace station 1111
A user at a remote branch location is registered to a G450 MG connected via Processor Ethernet (PE) to a main CM in the core. They report that they are no longer able to place calls to users at the core. Which three procedures can be used to diagnose the source of the problem?
Confirm that the PE interface is active by executing the CM display processor-Ethernet command and confirm that the Allow H.248 Gateway field is set to “Y”.
Use the show mac command on the MG to confirm that the IP address of the PE enabled server at the core is administered as the primary controller of the MG
Use the list survivable processor command to confirm that the survivable server is registered to the main CM in the core
How is the status of virtual machines (eg. DOM-0, CDOM-0, CM6.0) on S8800 server checked?
By going to the home page of Console Domain
Which Circuit Pack provides an IP Server Interface in an G650 Gateway?
TN2312AP
A technician is asked to retrieve a maintenance log for CMM that shows the information from 08:00 to 17:00 local time that day. Which shell command should be executed to retrieve the maintenance log?
displog - 1 maint -d 10/10/10 08:00
Which MAC address is recommended for the license file?
The MAC Address of the DOM0
A newly installed main CM 6.0 server indicates it is in license error mode. A technician checks again 45 minutes later and it is still in error mode. The license was installed from the System Management Interface. (SMI) Which statement describes the reason for the error mode?
The installer used the wrong interface to install the license and it is therefore not installed.
To backup CM, what two choices does the customer have? (Choose two)
Backup Now
Schedule Backup
A user at ext. 1111 complains that when dialing ext. 2222, the call is unexpectedly answered by the person at ext. 3333. All other calls are connected as expected. There is not a display on the phone. While at the SAT, the technician has the user repeat the call to ext. 2222. Which command shows the reason this call is behaving in this unexpected way?
List trace station 1111
Which greeting should be received when you are calling the Messaging hunt group?
Welcome to Audix
What two pieces of information does the Product Licensing and Delivery System (PLDS) require to be entered for a license to be generated? (Choose two)
License activation code
MAC address
Which statement describes the action to assure the CM_Simplex Template was installed correctly?
From a browser logged into the System Management Console, verify cm and utility_server appear and the Application State is running
Which two statements regarding shuffling and hairpinning are true? (Choose two)
The Audio Connection Type field on the CM status station form can be used to determine whether a call is shuffled
Shuffling releases media processor resources
Which Avaya G450 Module provides 8 DCP ports?
MM712
A network failure prevents communication between all the port networks (IPSIs) and their main CM server. Which is the maximum number of port networks (IPSIs) that can register to a survivable remote embedded server?
No port network
Which three server can be upgraded to CM 6.0?
S8300D
S8510
S8800
A customer has a CM R6.0 system with IP phones and older TDM phones, and says there is no dailtone for all of the IP Phones. All of the hardware has been verified to be working property. Which two steps can be taken to identify the cause of the problem? (Choose two)
Verify that the TN2602 Media Resource circuit pack has the correct IP settings
Set a stactic IP address on a laptop and see if the TN2602 Media Resource circuit pack can be pinged
To ensure that Communication Manager Messaging application is working. What are three test that can be performed? (Choose three)
Call one of the two station that you set as a subscriber to the messaging server, and let the call go to coverage
Leave a message on a covered call and verify that the MWI lamp on the receiving ext. is lit
Call the messaging hunt group from any of the stations to ensure it is answering
Which statement describes how the Communication Messaging Application is enabled the installation?
Open the CM IP address using web browser. Login as craft, click Admministration, then Server (Maintenance). Then click Miscellaneous, then Messaging Software, and then click Enable.
Through which two protocols can integration of the Communication Manager Messaging application 6.0 with Communication Manager occur? (Choose two)
H323/Q Sig protocol
SIP protocol
An administrator has just installed a 9620 IP phone on an existing system. The command change ip-network-map is used to administer the phone into network region 100. All other phones are in network region 1. Like all other 9620 phones on this system, this one successfully gets IP address information from the one DHCP server. However, the new phone fails to register with CM. Which two statements describe the cause of this problem? (Choose two)
Neither PROCR nor CLANs were administered in network region 100
There are no Medpros or H248 MG administered in network region 100
Which statement describes how the licensed mailboxes are enable on Communication Manager Messaging Application 6.0?
Mailboxes are enable by a separate license that needs to be generated and deployed
On a MG G450, into which slot does the S8300 server blade need to be inserted?
V1
Which two hardware components support CM_survRemote template? (Choose two)
S8800 Server
S8510 Server w/8GB RAM
In which two modes is CM R6.0 deployed? (Choose two)
Feature Server
Evolution Server
