Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

70-680 > 70-680 > Flashcards

70-680 Flashcards

1
Q

QUESTION: 1 You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com network contains both desktop and laptop workstations. You are responsible for managing a desktop workstation named HOTCERTS-WS620. HOTCERTS-WS620 is configured to run Windows Vista. You install Windows 7 on a new partition on HOTCERTS-WS620 but you want Windows Vista to be booted by default on HOTCERTS-WS620 and not Windows 7.What should you do?

A. You should consider running Bcdedit.exe and specifying the /default parameter.

B. You should consider creating a boot.ini file in the root of the Windows 7 partition.

C. You should consider running Bcdedit.exe and specifying the /bootems parameter.

D. You should consider creating a boot.ini file in the root of the Windows Vista partition.

A

Answer: A

A. You should consider running Bcdedit.exe and specifying the /default parameter

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

QUESTION: 2
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You are responsible for
maintaining Hotcerts.com’s Windows 7 workstations.You want to configure all Windows
7 workstations to produce a new Security ID (SID) as well as a Welcome screen every
time the workstation is booted.What should you do?
A. You should consider running Msconfig.exe and select Diagnostic startup on all
Windows 7 workstations.
B. You should consider running Sysprep.exe /audit /generalize on all Windows 7
workstations.
C. You should consider running Msconfig.exe and select Selective startup on all Windows
7 workstations.
D. You should consider running Sysprep.exe /oobe /generalize on all Windows 7
workstations.

A

Answer: D
Explanation:
The utility Sysprep is used to prepare systems before imaging and deployment. the switch/
oobe means “Out Of the Box Experience” which will cause the new image to start up fresh
just as if in came out of the shrink-wrap. The /generalize command is required in order for
the install to create a new SID.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

QUESTION: 3
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.Hotcerts.com purchases
a new client computer named HOTCERTS-WS680. You have been instructed to performan automated installation of Microsoft Windows 7 on HOTCERTS-WS680 using the
Microsoft Windows 7 DVD.What should you do?
A. You should consider creating an answer file named oobe.xml and copying it to a
network share.
B. You should consider creating an answer file named winnt.sif and copying it to a
removable drive.
C. You should consider creating an answer file named sysprep.inf and copying it to a
network share.
D. You should consider creating an answer file named autounattend.xml and copying it to
a removable drive.

A

Answer: D

D. You should consider creating an answer file named autounattend.xml and copying it to
a removable drive

Explanation:
When Windows 7 is booted from the DVD, it automatically searches for an answer file
called autounattend.xml. If it finds such a file, it will use that to answer all of the
configuration questions.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

QUESTION: 4
You work as the desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You need to perform a
clean installation of Microsoft Windows 7 Professional on the workstations in the
Research department. All workstations in the Research department have identical
hardware as listed below: 1.2 GHz Dual-Core processor.1024 MB of RAM.20 GB hard
drive.DirectX 10 video display card.Integrated sound card.10/100 integrated network
adapter.You need to ensure that the workstations able to support Windows 7 and are able
to support Windows XP mode.What should you do? (Each correct answer presents part of
the solution. Choose two.)
A. You should upgrade the processor.
B. You should upgrade the RAM.
C. You should upgrade the video card.
D. You should upgrade the hard drive.
E. You should upgrade the network adapter.

A

Answer: B,D

B. You should upgrade the RAM.

D. You should upgrade the hard drive
Explanation:
Although the workstations meet the system requirements for Windows 7, and additional 1
GB of RAM and an additional 15 GB hard drive space is required to support Windows XP
Mode.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

QUESTION: 5
You work as the Desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.The Hotcerts.com
management has instructed you to install Microsoft Windows 7 on all the client computers
at Hotcerts.com. You need to create a Windows 7 image that includes the Office 2007
Microsoft Installer Package (MSI) package for the installation. What should you do?
A. You should consider installing the MSI package by using the Msiexec command with
the /passive switch.
B. You should consider installing the MSI package by using the Msiexec command with
the /package /uninstall switches.
C. You should consider installing the MSI package by using the Msiexec command with
the /package switch.
D. You should consider installing the MSI package by using the Msiexec command with
the /update switch.

A

Answer: C

C. You should consider installing the MSI package by using the Msiexec command with
the /package switch.

Explanation:
When deploying Windows 7, you first build a reference computer with all settings,
configurations and application required. This includes installing applications. To install
Office using an MSI file, you run the windows installer program MSIEXEC.EXE . The
/package switch directs the installer to run and install the msi file listed. e.g . msiexec
/package Office64MUI.msi. The switch /package can be abbreviated to / i as in “ msiexec /
i Office64MUI.msi”. (Yes, / i not /p)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

QUESTION: 6
70-680
Hotcerts.com has employed you as a network Administrator. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You are in the process
of planning the installation of Windows 7 on a client computer named HOTCERTSWS06.
HOTCERTS-WS06 contains a single hard disk drive that is connected to a RAID
controller.Whilst doing the installation you notice that the installation media of Windows
7 does not include the necessary files to install the RAID controller. You have to make
sure that you are able to install Windows 7 on the hard disk drive.What should you do?
A. You should consider having HOTCERTS-WS04 started from the Windows installation
media. Then the Load Driver should be clicked from the Install Windows dialog box.
B. You should consider inserting the Windows installation media.
Thereafter F8 should be pressed during the power-on self test (POST) of HOTCERTSWS04.
C. You should consider having HOTCERTS-WS04 started from the Windows installation
media. Then Drive options (advanced) should be clicked from the Install Windows dialog
box.
D. You should consider inserting the Windows installation media.Thereafter F6 should be
pressed during the power-on self test (POST) of HOTCERTS-WS04.

A

Answer: A

A. You should consider having HOTCERTS-WS04 started from the Windows installation
media. Then the Load Driver should be clicked from the Install Windows dialog box.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

QUESTION: 7
You work as the network Administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network client computers currently make use of Microsoft Windows XP Professional. You
receive an instruction from Management to upgrade a client computer named
HOTCERTS-WS25 to Windows 7. You decide to do the installation using the Windows 7
DVD.What should you do? (Choose all that apply.)
A. Your best option would be to execute an upgrade of Windows 7 by keeping all the
Windows XP settings.
B. Your best option would be to execute a full installation of Windows 7.
C. Your best option would be to run setup.exe from the DVD in order to start the
Windows 7 installation.
D. Your best option would be to make use of the autorun feature on the DVD in order to
start the installation.

A

Answer: B,C,D

B. Your best option would be to execute a full installation of Windows 7.
C. Your best option would be to run setup.exe from the DVD in order to start the
Windows 7 installation.
D. Your best option would be to make use of the autorun feature on the DVD in order to
start the installation

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

QUESTION: 8
You are employed as the network Administrator at Hotcerts.com. The Hotcerts.com
network client computers currently make use of Microsoft Windows XP Professional.
Hotcerts.com has recently decided to have the client computers upgraded to Microsoft
Windows 7 with all the installed applications. You receive an instruction from
management to identify the volume types that is not used by Windows 7.
A. In Windows 7 exFAT is not a volume type.
B. In Windows 7 NTFS is not a volume type.
C. In Windows 7 FAT is not a volume type.
D. All of the above a volume types in Windows 7.

A

Answer: D

D. All of the above a volume types in Windows 7.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

QUESTION: 9
You are the newly appointed network Administrator at Hotcerts.com. The Hotcerts.com
network consists of a single Active Directory domain named Hotcerts.com. The
Hotcerts.com network client computers currently make use of Microsoft Windows XP
Professional. Hotcerts.com has recently decided to have the client computers upgraded to
Microsoft Windows 7 with all the installed applications. You are in the process of
informing the newly appointed users in your department when the Aero Shake feature will
work.What should you inform them? (Choose all that apply.)
A. The Aero Shake feature will work if the Windows Experience Index is 3 or greater.
B. The Aero Shake feature will work if the windows experience index is at least 2.
C. The Aero Shake feature will work if the display adapter is compatible with the installed
WDDM.
D. The Aero Shake feature will work if the Aero features are downloaded from Microsoft.

A

Answer: A,C

A. The Aero Shake feature will work if the Windows Experience Index is 3 or greater.

C. The Aero Shake feature will work if the display adapter is compatible with the installed
WDDM.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

QUESTION: 10
Hotcerts.com has hired you as a network Administrator for their network. The
Hotcerts.com network client computers currently make use of Microsoft Windows XP
Professional. You receive an instruction from one of the senior managers to upgrade his
workstation to Windows 7. The senior manager also informs you that the wants the
Windows 7 games as well as Titan Chess is installed on his workstation. You thus need to
identify the Windows 7 versions that will comply with the senior mangers request.What
should you do? (Choose all that apply.) All the games including Titan Chess come with
which versions of Windows 7? Choose two.
A. Your best option would be to install Windows Ultimate Edition.
B. Your best option would be to install Windows Professional Edition.
C. Your best option would be to install Windows Home Edition.
D. Your best option would be to install Windows Enterprise Edition.

A

Answer: A,D

A. Your best option would be to install Windows Ultimate Edition.D. Your best option would be to install Windows Enterprise Edition.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

QUESTION: 11
You work as the network Administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network client computers currently make use of Microsoft Windows XP Professional.
Hotcerts.com has recently decided to have the client computers upgraded to Microsoft
Windows 7. You receive an instruction from the CIO to ensure that the Active Directory
domain can be joined to the Windows 7 Edition.What should you do?
A. Your best option would be to install the Windows Professional Edition.
B. Your best option would be to install the Windows Ultimate Edition.
C. Your best option would be to install the Windows Home Edition.
D. Your best option would be to install the Windows Enterprise Edition.

A

Answer: A,B,D

A. Your best option would be to install the Windows Professional Edition.B. Your best option would be to install the Windows Ultimate Edition.D. Your best option would be to install the Windows Enterprise Edition.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

QUESTION: 12
You are employed as the network Administrator at Hotcerts.com. The Hotcerts.com
network client computers currently make use of Microsoft Windows XP Professional.
Hotcerts.com has recently decided to have the client computers upgraded to Microsoft
Windows 7. You thus decide to check whether the current workstations comply with the
requirements. You thus need to determine the minimum requirement necessary to install
Windows 7.What should you identify?
A. You will require a 16 GB available disk space (32-bit)/20 GB (64-bit).
B. You will require a 1 GHz or faster 32-bit (x86) or a 64-bit (x64) processor.
C. You will require a DirectX 9 graphics processor with WDDM 1.0 or higher driver.
D. You will require a 4GB RAM (32-bit)/2 GB RAM (64-bit).

A

Answer: D

D. You will require a 4GB RAM (32-bit)/2 GB RAM (64-bit).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

QUESTION: 13
You are employed as the network Administrator at Hotcerts.com. The Hotcerts.com
network client computers are configured to either use Windows XP Professional or
Windows Vista. You receive an instruction from management to identify the statement
that is regarding Windows 7.What should you do?
A. You should inform management that Outlook Express comes with Windows 7.
B. You should inform management that Microsoft Outlook is comes with Windows 7.
C. You should inform management that Windows 7 does not come with a preinstalled mail
client.
D. You should inform management that the MailCentral is the new default mail client with
Windows 7.

A

Answer: C

C. You should inform management that Windows 7 does not come with a preinstalled mail
client.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

QUESTION: 14
Hotcerts.com has hired you as a network Administrator for their network. All servers on
the Hotcerts.com network run Windows 7. Half the client computers run Windows Vista
and the rest Windows XP Professional. You are in the process of identifying the utilities
cannot be identified as a Windows PE tool. What should you do?
A. You should consider identifying Winpeshl.
B. You should consider identifying Oscdimg.
C. You should consider identifying Diskpart.
D. None of the above.

A

Answer: D

D. None of the above.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

QUESTION: 15
You are the newly appointed network Administrator at Hotcerts.com. The Hotcerts.com
network consists of a single Active Directory domain named Hotcerts.com. The
Hotcerts.com network client computers currently make use of Microsoft Windows XP
Professional. You receive an instruction from the CIO to install Windows 7 on a computer
named HOTCERTS-SR01. During routine monitoring you discover that the Online
Compatibility Check has failed during your installation. You thus need to determine the
reason this occurred. What should you identify? (Choose all that apply.)
A. The error occurred due to a display adapter with WDDM Support.
B. The error occurred due to a display adapter without WDDM Support but with SVIDEO
Support.
C. The error occurred due to 512MB of RAM.
D. The error occurred due to an 80 GB Hard Disk.

A

Answer: B,C

B. The error occurred due to a display adapter without WDDM Support but with SVIDEO
Support.
C. The error occurred due to 512MB of RAM.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

QUESTION: 16
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows
7.During the course of the day you receive instruction from Hotcerts.com to create an
unattended answer file which will be used to have Microsoft Windows 7 installed
70-680
automatically. Hotcerts.com additionally requested that you select the appropriate utilities
that can be used to create the unattended answer file.What should you do? (Choose two)
A. You should consider making use of the Deployment Workbench MDT utility can be
used.
B. You should consider making use of the Sysprep.exe utility can be used.
C. You should consider making use of the Windows SIM tool in Windows AIK utility can
be used.
D. You should consider making use of the Microsoft Notepad utility can be used.

A

Answer: C,D

C. You should consider making use of the Windows SIM tool in Windows AIK utility can
be used.
D. You should consider making use of the Microsoft Notepad utility can be used.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

QUESTION: 17
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows Vista
(x86). During the course of the day you receive instruction from Hotcerts.com to perform
a clean installation of Microsoft Windows 7 (64-bit) on a user named Rory Allen’s
computer.What should you do?
A. You should consider having the computer started using the Windows 7 installation
media. You should then have the Upgrade option selected from the Install Windows dialog
box.
B. You should consider having the computer started using the Windows 7 installation
media. You should then select the Custom (advanced) option from the Install Windows
dialog box.
C. You should consider having the Rollback.exe command used from the Windows 7
installation media.
D. You should consider having the Migsetup.exe command run from the Windows 7
installation media.

A

Answer: B

B. You should consider having the computer started using the Windows 7 installation
media. You should then select the Custom (advanced) option from the Install Windows
dialog box.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

QUESTION: 18
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.A Hotcerts.com user
named Rory Allen uses of a Microsoft Windows 7 Professional client computer named
HOTCERTS-WS680. During the course of the day Rory Allen attaches a USB disk to
HOTCERTS-WS680. However, Rory Allen is cannot enable BitLocker To Go on the USB
70-680
disk. You need to ensure that Rory Allen can enable BitLocker To Go on the USB
disk.What should you do?
A. You should consider upgrading HOTCERTS-WS680 to Microsoft Windows 7
Ultimate.
B. You should consider initializing the Trusted Platform Module (TPM) hardware on
HOTCERTS- WS680.
C. You should consider obtaining a client certificate for HOTCERTS-WS680 from an
enterprise certification authority (CA).
D. You should consider enabling Encrypting File System (EFS) on HOTCERTS-WS680.

A

Answer: A

A. You should consider upgrading HOTCERTS-WS680 to Microsoft Windows 7
Ultimate

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

QUESTION: 19
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Windows XP Professional with Service Pack 1 (SP1).You
have been assigned a client computer named HOTCERTS-WS270. You want to upgrade
HOTCERTS-WS270 to Windows 7 Professional without needing to install any of your
applications. You verify that HOTCERTS-WS270 meets the system requirements for
Windows 7 by installing and running the Windows 7 Upgrade Advisor.What should you
do next?
A. You should consider upgrading HOTCERTS-WS270 to Microsoft Windows Vista
Business, and then upgrade it to Windows 7 Professional.
B. You should consider installing Service Pack 3 (SP3) on HOTCERTS-WS270, and then
upgrade it to Windows 7 Professional.
C. You should consider installing and running Windows Easy Transfer on HOTCERTSWS270,
and then perform a clean installation of Windows 7 Professional.
D. You should consider installing and running Windows Easy Transfer on HOTCERTSWS270,
and then upgrade it to Windows 7 Professional.

A

Answer: A

A. You should consider upgrading HOTCERTS-WS270 to Microsoft Windows Vista
Business, and then upgrade it to Windows 7 Professional.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

QUESTION: 20
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The client computers
on the Hotcerts.com network run a mix of Windows 2000 Professional with Service Pack
5 (SP5), Windows XP Professional with Service Pack 3 (SP3), Windows Vista Business
and Windows Ultimate. You have received instructions to upgrade some of the client
computers to Windows 7 Professional.What should you do?
A. You should consider upgrading the Microsoft Windows 2000 Professional computers
to Windows 7 Professional.
B. You should consider upgrading the Microsoft Windows XP Professional computers to
Windows 7 Professional.
C. You should consider upgrading the Microsoft Windows Vista Business computers to
Windows 7 Professional.
D. You should consider upgrading the Microsoft Windows Vista Ultimate computers to
Windows 7 Professional.
E. You should consider upgrading the Microsoft Windows Vista Business and Microsoft
Windows Vista Ultimate computers to Windows 7 Professional.

A

Answer: C

C. You should consider upgrading the Microsoft Windows Vista Business computers to
Windows 7 Professional.

Explanation:
Only Windows Vista Business can be upgraded to Windows 7 Professional.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

QUESTION: 21
You work as the desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Windows Vista Business.You have been instructed to
upgrade a client computer named HOTCERTS-WS620 to Microsoft Windows 7
Professional. HOTCERTS-WS620 has the following specifications: Drive C (system
drive) has 12 gigabytes (GB) of free space.Drive D (data drive) has 40 GB of free
space.Four memory slots with two occupied by a 512 megabyte (MB) memory stick.One
2.0 gigahertz (GHz) 32-bit processor.You need to ensure that Windows 7 Professional can
be installed on HOTCERTS-WS620.What should you do?
A. You should consider installing Windows 7 on Drive D.
B. You should consider creating more free space on Drive C.
C. You should consider upgrading the memory.
70-680
D. You should consider upgrading the processor.

A

Answer: B

B. You should consider creating more free space on Drive C.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

QUESTION: 22
You work as the desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Windows XP Professional.You have been instructed to
upgrade the Windows XP Professional client computers to Windows 7. However, before
you proceed you need to determine if the current applications on the Windows XP
Professional computers will run on Windows 7. You want to accomplish this task using
the least amount of administrative effort.What should you do?
A. You should run the Application Compatibility Toolkit (ACT) 5.5.
B. You should run Windows Update.
C. You should run the Windows 7 Upgrade Advisor.
D. All of above

A

Answer: A

A. You should run the Application Compatibility Toolkit (ACT) 5.5.

Explanation:
Application Compatibility Toolkit (ACT) 5.5 collects information about the applications
that are installed on the network computers and provides information about the
applications that are incompatible with Windows Vista. Windows Vista Upgrade Adviser
can also be used for the same purpose but it requires a massive amount of administrative
effort because it needs to be run separately on each computer.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

QUESTION: 23
You are employed as the network Administrator at Hotcerts.com. The Hotcerts.com
network client computers currently make use of Windows Vista Enterprise (x86). You are
responsible for managing a client computer named HOTCERTS-WS20. During the course
of the day you receive instructions from Hotcerts.com to identify the Windows 7 version
and edition HOTCERTS-WS20 can directly upgrade to.What should you do?
A. Your best option would be to make use of Windows 7 Enterprise (x64).
B. Your best option would be to make use of Windows 7 Home Professional (x86).
C. Your best option would be to make use of Windows 7 Ultimate (x86).
D. Your best option would be to make use of Windows 7 Ultimate (x64).

A

Answer: C

C. Your best option would be to make use of Windows 7 Ultimate (x86).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

QUESTION: 24
You work as the network Administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You are in the process
of determining when you need to execute a migration rather that an upgrade.What should
you do? (Choose all that apply.)
A. Your best option would be to migrate Windows Vista Business (x86) to Windows 7
Professional (x64).
B. Your best option would be to migrate Windows Vista Enterprise (x64) to Windows 7
Enterprise (x64).
C. Your best option would be to migrate Windows Vista Home Premium (x64) to
Windows 7 Home Premium (x86).
D. Your best option would be to migrate Windows XP Professional (x64) to Windows 7
Professional (x64).

A

Answer: A,C,D

A. Your best option would be to migrate Windows Vista Business (x86) to Windows 7
Professional (x64).

C. Your best option would be to migrate Windows Vista Home Premium (x64) to
Windows 7 Home Premium (x86).

D. Your best option would be to migrate Windows XP Professional (x64) to Windows 7
Professional (x64).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

QUESTION: 25
You are the newly appointed network Administrator at Hotcerts.com. The Hotcerts.com
network consists of a single Active Directory domain named Hotcerts.com. You are
responsible for a computer named HOTCERTS-WS04. HOTCERTS-WS04 is configured
to run Windows Vista Service Pack 2 (SP2). During the course of the week you receive an
instruction from the CIO to have HOTCERTS-WS04 upgraded to Windows 7.What
should you do?
A. This can be accomplished from Windows Vista by running Setup.exe from the
Windows 7 installation media.Thereafter the Custom (advanced) option should be
selected.
B. This can be accomplished by starting HOTCERTS-WS04 from the Windows
installation media.Thereafter the Upgrade option should be selected.
C. This can be accomplished by starting HOTCERTS-WS04 from the Windows 7
installation media.Thereafter the Custom (advanced) option should be selected.
D. This can be accomplished from Windows Vista by running Setup.exe from the
Windows 7 installation media.Thereafter the Upgrade option should be selected.

A

Answer: D

D. This can be accomplished from Windows Vista by running Setup.exe from the
Windows 7 installation media.Thereafter the Upgrade option should be selected.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

QUESTION: 26
70-680
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.A
Hotcerts.com employee named Rory Allen has a computer at home with a cable modem
connection. Rory Allen has recently requested that you guide him by selecting the
appropriate method to upgrade from Microsoft Windows 7 Home Premium to Microsoft
Windows 7 Ultimate.What should you do?
A. You should consider instructing Rory Allen that WDS can be used.
B. You should consider instructing Rory Allen that Windows Anytime Upgrade can be
used.
C. You should consider instructing Rory Allen that Sysprep can be used.
D. You should consider instructing Rory Allen that Windows PE can be used.

A

Answer: B

A. You should consider instructing Rory Allen that WDS can be used.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

QUESTION: 27
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows Vista.
During the course of the day a network user named Mia Hamm asked you which of the
Microsoft tools can be used to determine if your installed applications have known
problems with Microsoft Windows 7.What should you do?
A. You should consider instructing Mia Hamm that the USMT Microsoft tool can be used.
B. You should consider instructing Mia Hamm that the Windows PE Microsoft tool can be
used.
C. You should consider instructing Mia Hamm that the Windows 7 Upgrade Advisor
Microsoft tool can be used.
D. You should consider instructing Mia Hamm that the Sysprep Microsoft tool can be
used.

A

Answer: C

C. You should consider instructing Mia Hamm that the Windows 7 Upgrade Advisor
Microsoft tool can be used.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

QUESTION: 28
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You are responsible for
managing a workstation named HOTCERTS-WS624. HOTCERTS- WS624 is configured
to run Windows Vista and contains an accounting application named accapp.exe.
Hotcerts.com purchases a new Windows 7 workstation that will replace HOTCERTS-624.
You need to export the user state as well as the settings of the accapp.exe application so
that it can be migrated to the Windows 7 workstation.What should you do?
A. You should consider modifying the migapp.xml file on HOTCERTS-WS624 and then
run Scanstate.exe with the /i parameter.
B. You should consider modifying the miguser.xml file on HOTCERTS-WS624 and then
running Loadstate.exe with the /ui parameter.
C. You should consider running Scanstate.exe with the /genconfig parameter on
HOTCERTS- WS624.
D. You should consider running Loadstate.exe with the /config parameter on
HOTCERTS- WS624.

A

Answer: A

A. You should consider modifying the migapp.xml file on HOTCERTS-WS624 and then
run Scanstate.exe with the /i parameter.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

QUESTION: 29
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You are assigned two
workstations named HOTCERTS-WS625 and HOTCERTS-WS680. HOTCERTS-WS625
is configured to run Windows Vista and HOTCERTS-WS680 is configured to run
Windows 7.You receive an instruction to migrate the user files and profiles from
HOTCERTS-WS625 to HOTCERTS-WS680. To accomplish this you decide to determine
the amount space needed to accomplish the migration.What should you do?
A. You should consider running Scanstate \computer1\store /nocompress /p on
HOTCERTS- WS680.
B. You should consider running Scanstate c:\store /nocompress /p on HOTCERTSWS625.
C. You should consider running Loadstate \computer1\store /nocompress on
HOTCERTS- WS680.
D. You should consider running Loadstate c:\store /nocompress on HOTCERTS-WS625.

A

Answer: B

B. You should consider running Scanstate c:\store /nocompress /p on HOTCERTSWS625.
C. You should consider running Loadstate \computer1\store /nocompress on
HOTCERTS- WS680.

Explanation:
/p Generates a space-estimate file called Usmtsize.txt that is saved to StorePath . This
option does not collect the user state. You must also specify / nocompress . The command
must be run locally on HOTCERTS625 (The source computer). The storage location may
be on the network or local.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

QUESTION: 30
You work as the Desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network contains 300 Windows XP Professional workstations and 200 Windows Vista
Ultimate workstations.You have been instructed to migrate all Windows XP Professional
workstations to Windows 7 Ultimate. You need to ensure that user files and setting are
retained. However, several Hotcerts.com users have used Encrypting File System (EFS) to
encrypt their user files. You thus need to migrate the Encrypting File System (EFS)
encrypted files and certificates. In addition you need to ensure that you are able to encrypt
the migration store during the migration.What should you do?
A. On Windows XP make use of the User State Migration Tool (USMT) 3.0.
B. On Windows XP make use of the User State Migration Tool (USMT) 2.6.
C. On Windows 7 make use of the User State Migration Tool (USMT) 4.0.
D. On Windows 7 make use of the User State Migration Tool (USMT) 3.0.
Answer: A
Explanation:
USMT 3.0 or higher should be used on Windows XP to migrate EFS files and certificates
and also encrypt the migration store. With USMT 3.0 you can specify the / efs :copyraw
switch to automatically migrate the EFS files and certificates to the destination computer
that is running Windows Vista. To encrypt the store, you should use the /encrypt switch.

A

Answer: A

A. On Windows XP make use of the User State Migration Tool (USMT) 3.0.

Explanation:
USMT 3.0 or higher should be used on Windows XP to migrate EFS files and certificates
and also encrypt the migration store. With USMT 3.0 you can specify the / efs :copyraw
switch to automatically migrate the EFS files and certificates to the destination computer
that is running Windows Vista. To encrypt the store, you should use the /encrypt switch.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

QUESTION: 31
You work as the Desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You have been
instructed to perform a clean installation of Microsoft Windows 7 on the Hotcerts.com
client computers that are currently running Microsoft Windows Vista.You need to be able
to migrate user data and settings to Windows 7. The computers running Windows Vista
currently have a single partition of 80 GB with 60 GB of free disk space. You need to use
the User State Migration Tool (USMT) to migrate user state data while keeping network
traffic to a minimum.What should you do?
A. You should create a network share and store the user data in the shared folder.
B. You should format the hard disks on the Windows Vista computers and create a
primary and a secondary partition.
C. You should use third-party tools to resize the 80 GB partition and create a seconds
partition to store the user data.
D. You should use the Windows Easy Transfer tool to store the user data on the system
partition.

A

Answer: C

C. You should use third-party tools to resize the 80 GB partition and create a seconds
partition to store the user data.

Explanation:
Resizing the 80 GB partition with a third-party tool and creating a second partition to store
the user state data will keep the network traffic to a minimum. If you want to store user
state data on a network share and the computer does not have a secondary partition, you
should resize the partition.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

QUESTION: 32
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.
During the course of the day a network user named Dean Austin asked you which of the
Microsoft operating systems supports offline migration using USMT.What should you do?
(Choose all that apply)
A. You should consider instructing Dean Austin that Microsoft Windows Vista supports
offline migration using USMT.
B. You should consider instructing Dean Austin that Microsoft Windows XP Professional
supports offline migration using USMT.
C. You should consider instructing Dean Austin that Microsoft Windows 7 supports
offline migration using USMT.
D. You should consider instructing Dean Austin that Microsoft Windows 2000
Professional supports offline migration using USMT.

A

Answer: A,B,C

A. You should consider instructing Dean Austin that Microsoft Windows Vista supports
offline migration using USMT.
B. You should consider instructing Dean Austin that Microsoft Windows XP Professional
supports offline migration using USMT.
C. You should consider instructing Dean Austin that Microsoft Windows 7 supports
offline migration using USMT.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

QUESTION: 33
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You are busy with a
deployment of an image of a computer. You have created an answer file named
answer.xml. You want to ensure that the installation applies the answer file after the
deployment of the image.What should you do?
A. You should consider running the Imagex.exe /append answer.xml /check before you
capture the image.
B. You should consider running the Sysprep.exe /generalize /oobe /unattend:answer.xml
before you capture the image.
C. You should consider running the Imagex.exe /mount answer.xml /verify before you
capture the image.
D. You should consider running the Sysprep.exe /reboot /audit /unattend:answer.xml
before you capture the image.

A

Answer: B

B. You should consider running the Sysprep.exe /generalize /oobe /unattend:answer.xml
before you capture the image.

Explanation:
The System Preparation ( Sysprep ) tool prepares an installation of Windows 7 for
duplication, auditing, and customer delivery. You can use an answer file with Sysprep to
configure unattended Setup settings.The /generalize command removes any machine
specific attributes such as the Seurity ID (SID). The / oobe command tells the image to
start with the normal “Out-Of-The-Box” experience. Just as if you bought a retail new
copy.The / unattend : command tells the image to use the answer file

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
34
Q

QUESTION: 34
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network contains 120 workstations.Hotcerts.com is currently in the process of migrating
70-680
all of its workstations to Windows 7. In preparation if the migration, you have installed
Windows 7 on a computer named HOTCERTS- WS680. You now need to create an image
of HOTCERTS-WS680, which will be deployed to all workstations on the Hotcerts.com
network.What should you do before creating the image on HOTCERTS-WS680?
A. You should consider running the System Preparation.
B. You should consider installing the User State Migration Tool.
C. You should consider installing the Windows Automated Installation Kit.
D. You should consider running the Package Manager.

A

Answer: A

A. You should consider running the System Preparation.

Explanation:
Sysprep is used to prepare the image to be installed on other machines. Sysprep will
remove the SID, Reset the Activation to 30 days, add an answer file if desired and reset
the install to an “Out- Of-The-Box” experience.Any method of moving a Windows image
to a new computer, either through imaging, hard disk duplication, or other method, must
be prepared with the sysprep /generalize command. Moving or copying a Windows image
to a different computer without running the Sysprep /generalize command is not
supported.The following command-line options are available for Sysprep : sysprep.exe [ /
oobe | /audit ] [/generalize] [/reboot | /shutdown | /quit] [/quiet] [ / unattend :answerfile
]

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
35
Q

QUESTION: 35
You work as the Desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You have been
instructed to deploy Microsoft Windows 7 on all of the Hotcerts.com client
computers.You have installed Windows Automated Installation Kit (Windows AIK) on a
reference computer. You then created an answer file for a Windows 7 unattended
installation. You now need to validate the answer file before deploying Windows 7 to the
Hotcerts.com client computers.What should you do?
A. You should consider using the Setup Manager.
B. You should consider using the Sysprep.exe utility.
C. You should consider using the Office Customization Tool (OCT).
D. You should consider using the Windows System Image Manager (Windows SIM) tool.

A

Answer: D

D. You should consider using the Windows System Image Manager (Windows SIM) tool.

Explanation:
The Windows SIM tool is used to create an answer file, as well as to validate the answer
file to ensure that the file is working.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
36
Q

QUESTION: 36
You work as the Desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You have been
instructed to deploy Microsoft Windows 7 on all the Hotcerts.com client computers. You
want to deploy Windows 7 on the client computers in unattended mode. You install
Windows 7 on reference computer named HOTCERTS-WS680 that will be used to build a
master image. You then manually create the answer file that will be required for the
unattended installation.What should you do next?
A. You should use Sysprep.exe to capture an image of HOTCERTS-WS680.
B. You should use the ImageX command-line utility to capture an image of HOTCERTSWS680.
C. You should use Windows System Image Manager (Windows SIM) to validate the
answer file.
D. You should use the Setup Manager Tool to validate the answer file.

A

Answer: C

C. You should use Windows System Image Manager (Windows SIM) to validate the
answer file.

Explanation:
When manually creating an answer file, you should always validate the answer file using
SIM. Validating will ensure that the values in the answer file are correct. If you neglect to
validate after manually creating the answer file, you will encounter errors when deploying
Windows 7 and will then have to validate the answer file.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
37
Q

QUESTION: 37
You work as the Desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You have received
instructions to deploy Windows 7 on all the Hotcerts.com client computers that have CDROM
drives.You decide to create a custom Windows 7 image on spanned media using the
70-680
Createspannedshares.cmd script. However, you are unable run the Crespannedshares.cmd
script.What should you do?
A. You should consider installing the Package Manager prior to creating the spanned
media.
B. You should consider installing Windows Automated Installation Kit (Windows AIK)
prior to creating the spanned media.
C. You should consider installing the Deployment Image Servicing and Management
(DISM) tool prior to creating the spanned media.
D. You should consider installing the Windows System Image Manager (Windows SIM)
prior to creating the spanned media.

A

Answer: B

B. You should consider installing Windows Automated Installation Kit (Windows AIK)
prior to creating the spanned media.

Explanation:
To be able to create the spanned media to install Windows 7 on the CD-ROM client
computers you need to install Windows AIK on a computer from where you plan to create
the spanned media. Only after the installation of Windows AIK will you be able to run the
Createspannedshares.cdm script to create the spanned media.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
38
Q

QUESTION: 38
You work as the Desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.The Hotcerts.com
management has instructed you to install Microsoft Windows 7 on all the client computers
at Hotcerts.com. You have installed Windows Deployment Service (WDS) on a server
named HOTCERTS-SR05. You want to use a client computer named HOTCERTSWS680
as a reference computer from which you want to create the image for the
deployment. You now need to remove hardware-specific information from the Windows
installation on HOTCERTS-WS680.What should you do?
A. You should consider running the Sysprep.exe utility with the /oobe and /generalize
switches on HOTCERTS-WS680.
B. You should consider running the Pkgmgr.exe utility with the /oobe and /generalize
switches on HOTCERTS-WS680.
C. You should consider running the Setupmgr utility with the /oobe and /generalize
switches on HOTCERTS-WS680.
D. You should consider running the ImageX command-line utility with the /oobe and
/generalize switches on HOTCERTS-WS680.

A

Answer: A

A. You should consider running the Sysprep.exe utility with the /oobe and /generalize
switches on HOTCERTS-WS680.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
39
Q

QUESTION: 39
You work as the Desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network contains 5 Windows Server 2008 servers, 200 Windows Vista Business client
computers and 300 Windows 7 Professional client computers.You have been instructed to
deploy Microsoft Windows 7 on the 200 Windows Vista Business client computers. There
is an existing offline Windows 7 image on a client computer named HOTCERTS-WS680.
However, you need to add updated device drivers to this image.What should you do?
A. You should consider using the ImageX command line utility.
B. You should consider using the Pkgmgr.exe utility.
C. You should consider using the Windows System Image Manager (Windows SIM).
D. You should consider using the Deployment Image Servicing and Management (DISM)
tool.

A

Answer: D

D. You should consider using the Deployment Image Servicing and Management (DISM)
tool.

Explanation:
The Deployment Image Servicing and Management (DISM) tool replaces the Pkgmgr.exe
utility and is used to update images by adding or removing device drivers and language
packs, enabling or disabling Windows features, and adding and configuring Windows
updates.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
40
Q

QUESTION: 40
You work as the Desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. Hotcerts.com has its
headquarters in London and a regional office in New York. All client computers on the
Hotcerts.com network run Windows 7 Ultimate. You are responsible for managing
Hotcerts.com’s operating system deployment images.Hotcerts.com is in the process of
opening a European regional office in Rome. You are required to ensure that a Windows 7
image with support for Italian is available for deployment in the Rome office.What should
you do?
A. You should consider using the ImageX command-line tool to mount the Windows 7
image and make the appropriate changes using an answer file.
B. You should consider using the ImageX command-line tool to mount the Windows 7
image and use a script to commit changes to the image.
C. You should consider using the International Settings and Configuration (Intlcfg.exe)
tool to make the appropriate changes to the Windows 7 image.
D. You should consider using the Windows System Image Manager(Windows SIM) to
create an answer file and then use the Deployment Image Servicing and Management
(DISM) tool to apply it to the Windows 7 image.

A

Answer: D

D. You should consider using the Windows System Image Manager(Windows SIM) to
create an answer file and then use the Deployment Image Servicing and Management
(DISM) tool to apply it to the Windows 7 image.

Explanation:
The Deployment Image Servicing and Management (DISM) tool allows you to add or
remove packages to or from an offline image or an image that is currently running on a
computer. You can also add or remove Windows features, apply unattended installation
answer file settings, and perform the offline installation of language packs and out-of-box
driver packages specified in an answer file.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
41
Q

QUESTION: 41
You work as the Desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. Hotcerts.com has its
headquarters in London and a regional office in New York. All client computers on the
Hotcerts.com network run Windows 7 Ultimate. You are responsible for managing
Hotcerts.com’s operating system deployment images.Hotcerts.com is in the process of
opening a European regional office in Rome. You are required to ensure that support for
Italian is available for the Windows 7 deployment in the Rome office. However, you need
to install the Italian language pack without editing the Windows 7 image.What should you
do?
A. You should consider installing the Italian language pack by using the Language Pack
Setup Tool.
B. You should consider copying the Windows distribution folder to the Italian language
pack.
C. You should consider installing the Italian language pack by using the Package Manager
utility.
D. You should consider installing the Italian language pack by using the Intlcfg.exe tool.

A

Answer: B

B. You should consider copying the Windows distribution folder to the Italian language
pack.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
42
Q

QUESTION: 42
You are employed as the network Administrator at Hotcerts.com. The Hotcerts.com
network contains 150 client computers currently make use of Microsoft Windows XP
Professional.Hotcerts.com has recently decided to deploy Windows 7 to 80 client
computers on the Hotcerts.com network. You thus decide to install Windows 7 on a
computer named HOTCERTS-WS06 and prepare it to be imaged. You thus need to
determine what you should be doing prior to creating the image of HOTCERTSWS06.
What should you do?
A. You should consider starting HOTCERTS-WS06 from the Windows Preinstallation
Environment (Windows PE).Thereafter the Wpeutil command should be run.
B. You should consider running the Dism command at the command prompt.
C. You should consider running the Sysprep command at the command prompt.
D. You should consider starting HOTCERTS-WS06 from the Windows Preinstallation
Environment (Windows PE).Thereafter the Imagex command should be run.

A

Answer: C

C. You should consider running the Sysprep command at the command prompt.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
43
Q

QUESTION: 43
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory forest containing a single domain named Hotcerts.com. The
servers on the network run Microsoft Windows Server 2008 and the client computers run
Microsoft Windows 7. The Hotcerts.com network currently has 25 desktop computers and
25 portable computer configured with 32-bit hardware.During the course of the day you
planned the deployment of Windows 7 along with several corporate applications to client
computers using a custom image. Hotcerts.com wants you to prepare for the deployment
whilst ensuring the least amount of administrative effort is used.What should you do?
A. You should consider having the Microsoft Assessment and Planning (MAP) toolkit
installed and run on a server.
B. You should consider having the Windows Automated Installation Kit (AIK) installed
and run the Windows System Image Manager (Windows SIM) on a server.
C. You should consider having Microsoft Windows 7 and the corporate applications
installed on one computer.
D. You should consider having Microsoft Windows 7 and the corporate applications
installed on one portable computer and one desktop computer.

A

Answer: C

C. You should consider having Microsoft Windows 7 and the corporate applications
installed on one computer.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
44
Q

QUESTION: 44
You work as the desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network contains two Windows Server 2008 computers named HOTCERTS-SR01 and
HOTCERTS-SR02 and 500 Windows Vista Ultimate client computers. HOTCERTSSR01
functions as a Domain Controller (DC) while HOTCERTS-SR02 functions as a
Domain Name System (DNS) server.Hotcerts.com purchases 200 new client computers
that have the following resources: 2.33 GHz Dual-Core processor.2 GB of RAM.80 GB
hard drive.DirectX 10 video display card.Integrated sound card.10/100/1000 integrated
network adapter.You need to perform a clean installation of Microsoft Windows 7
Ultimate on the new client computers. You use one of the new client computers as a
reference computer from which you build a custom image and an answer file. You want to
70-680
deploy the image to the new client computers over the network using Windows
Deployment Services (WDS).What should you do?
A. You should install a Remote Installation Services (RIS) server on the network.
B. You should install a Dynamic Host Configuration Protocol (DHCP) server on the
network.
C. You should upgrade the Domain Controller to Windows Server 2008 R2.
D. You should install a Windows Internet Name Service (WINS) server on the network.

A

Answer: B

B. You should install a Dynamic Host Configuration Protocol (DHCP) server on the
network.
Explanation:
The network must have a DHCP server with an active scope as Windows Deployment
Services uses PXE, which relies on DHCP for IP addressing.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
45
Q

QUESTION: 45
You work as the Desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You have been
instructed to deploy Microsoft Windows 7 on all the Hotcerts.com client computers.You
use a client computer named HOTCERTS-WS680 as a reference computer to create
custom image and an answer file that will be used to automate the deployment of
Windows 7 on the client computers. You want to complete the task with the least amount
of administrative effort.What should you do?
A. You should consider installing Systems Management Server (SMS) operating system
deployment (OSD) feature pack on HOTCERTS-WS680.
B. You should consider installing the Windows Automated Installation Kit (Windows
AIK) on HOTCERTS-WS680.
C. You should consider installing Windows System Image Manager (Windows SIM) on
HOTCERTS-WS680.
D. You should consider installing the ImageX command-line utility on HOTCERTSWS680.

A

Answer: B

B. You should consider installing the Windows Automated Installation Kit (Windows
AIK) on HOTCERTS-WS680.
Explanation:
WAIK is a set of tools that will aid you in deploying Windows 7 on target computers. You
can create an answer file and capture an image of a reference computer by making use of
Windows AIK.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
46
Q

QUESTION: 46
You work as the Desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You have been
instructed to deploy Microsoft Windows 7 on Hotcerts.com client computers that do not
support PXE.You install Windows Deployment Service (WDS) on a server named
HOTCERTS-SR05 and create a discover image for the deployment. You now need to
identify the best method for creating bootable media that will be used to deploy Windows
7 on the non-PXE supporting client computers.What should you do?
A. You should consider installing Windows System Image Manager (Windows SIM) on
HOTCERTS-SR05.
B. You should consider installing the Windows Automated Installation Kit (Windows
AIK) on HOTCERTS-SR05.
C. You should consider installing the Business Desktop Deployment (BDD) workbench
on HOTCERTS-SR05.
D. You should consider installing System Management Server (SMS) on HOTCERTSSR05
and create an Image Capture CD using the SMS console.

A

Answer: B

B. You should consider installing the Windows Automated Installation Kit (Windows
AIK) on HOTCERTS-SR05.

Explanation:
Bootable media that will be used to deploy Windows 7 to client computers must be created
after a discover image is created. WAIK will provide the tools that are required to create
the bootable media.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
47
Q

QUESTION: 47
You work as a Desktop support technician at Hotcerts.com. You have been assigned the
task of installing Windows 7 on 10 network computers using custom WIM image.You
have Windows Automated Installation Kit (Windows AIK) installed on one of the
computers. You now want to create a WinPE CD to capture or apply the custom WIM
image of Windows 7 from the master computer.What should you do? (Each correct
answer presents part of the solution. Choose three.)
A. You should copy the WinPE.wim and boot files to WinPE_x86 and Burn this data on a
CD.
B. You should run Copype.cmd to install Windows PE to a directory and then copy the
imagex.exe file to ISO folder under WinPE_x86 directory
70-680
C. You should create wimscript.ini configuration file in notepad. Save the file in the same
directory as imagex.exe.
D. You should copy the Oscdimg.exe file and create a configuration file named
wimscript.ini. Save the file in the same directory as Oscdimg.exe.
E. You should run Oscdimg.exe to create an ISO image of WinPE. Burn the image on a
CD.

A

Answer: B,C,E

B. You should run Copype.cmd to install Windows PE to a directory and then copy the
imagex.exe file to ISO folder under WinPE_x86 directory
70-680
C. You should create wimscript.ini configuration file in notepad. Save the file in the same
directory as imagex.exe.

E. You should run Oscdimg.exe to create an ISO image of WinPE. Burn the image on a
CD.

Explanation:
To create a WinPE CD and to initiate Windows Vista installation using a custom WIM
image of Windows Vista, you need to first run Copype.cmd to install Windows PE to a
directory and then copy the imagex.exe file to ISO folder under WinPE_x86 directory,
then create wimscript.ini configuration file in notepad and save the file in the same
directory as imagex.exe, and then finally run Oscdimg.exe to create an ISO image of
WinPE and then burn the image on a CD.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
48
Q

QUESTION: 48
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.The Hotcerts.com
network contains a client computer named HOTCERTS-WS679 with a Virtual Hard Disk
(VHD). You have installed Windows 7 on the Virtual Hard Disk (VHD). You now want to
boot HOTCERTS-WS679 from the Virtual Hard Disk (VHD).What should you do?
A. You should consider running the Select vdisk from the Diskpart.exe command.
B. You should consider changing the active partition in Disk Management.
C. You should consider running the Bcdedit.exe command and modifying the Windows
Boot Manager settings.
D. You should consider running the Bootcfg.exe command with the /default parameter.

A

Answer: C

C. You should consider running the Bcdedit.exe command and modifying the Windows
Boot Manager settings.
Explanation:
If you are deploying the VHD to a computer with an existing Windows7 or Windows
Server®2008R2 installation, you can use the BCDedit tool to make the new VHD
bootable and add it to the boot menu. Using BCDedit , you obtain the GUID from the
VHD boot disk and then using BCDedit , set that GUID to be the default boot device.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
49
Q

QUESTION: 49
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You have created a
Virtual Hard Disk (VHD) with a disk image that you want to add to a client computer
named HOTCERTS-WS680. You have copied the VHD to HOTCERTS-WS680 and
attached it using the attach vdisk command. You now want to add the Virtual Hard Disk
(VHD) to the Windows 7 boot menu.What should you do?
A. You should consider using the Bcdedit.exe utility to modify the Windows Boot
Manager settings.
B. You should consider using Disk Management to change the active partition.
C. You should consider using the BCDboot utility to copy the boot environment files and
Boot Configuration Data (BCD) configuration from the \Windows directory in the VHD to
HOTCERTS- WS680.
D. You should consider sing the Bootcfg.exe utility with the /default parameter to set the
VHD as the default boot device.

A

Answer: C

C. You should consider using the BCDboot utility to copy the boot environment files and
Boot Configuration Data (BCD) configuration from the \Windows directory in the VHD to
HOTCERTS- WS680.
Explanation:
To deploy a VHD image:
1. On the source computer, use the Diskpart tool to create, attach, partition, and format a
new virtual hard disk.
2. Use Use ImageX to apply the . wim file to the primary partition of the VHD.
3. Use the DiskPart tool to detach the virtual disk after applying the image. Copy the VHD
file to a network share or USB hard drive
4. Boot the target computer with Boot PE and prepare the hard drive using Diskpart
5. Copy the VHD to the drive and attach using Diskpart
6. Use the BCDboot tool, located in the \System32 directory of the Windows7 VHD or in
a Windows®7 WindowsPE media, to copy the boot-environment files from the \Windows
directory in the VHD to the system partition. The BCDboot tool will create the BCD
configuration to boot from the VHD.
7. Use Diskpart to detach the VHD and then restart the computer.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
50
Q

QUESTION: 50
You work as the network Administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. Hotcerts.com has
acquired a new computer named HOTCERTS-WS25 that has no operating system (OS)
installed.There is a virtual hard disk (VHD) in your department that contains an
70-680
installation of Windows 7. You thus decide to start HOTCERTS-WS25 from the Windows
Preinstallation Environment (Windows PE). You then create a partition on HOTCERTSWS25
and copy the VHD to it. Your subsequent step is to configure HOTCERTS-WS25
to start from the virtual hard disk.What should you do?
A. Your best options would be to make use of Wpeutil.exe and Dism.exe.
B. Your best options would be to make use of Scanstate.exe and Loadstate.exe.
C. Your best options would be to make use of Imagex.exe and Bcdedit.exe.
D. Your best options would be to make use of Diskpart.exe and Bcdboot.exe.

A

Answer: D

D. Your best options would be to make use of Diskpart.exe and Bcdboot.exe.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
51
Q

QUESTION: 51
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows
7.During the course of the day you receive instruction from Hotcerts.com to create a 20-
GB native VHD which will be named KingSystem located in a folder KingWindows
which resides on an external hard disk assigned the H: drive designation.What should you
do?
A. You should consider making use of the create vdisk
file=h:\kingwindows\kingsystem.vhd maximum=20 command.
B. You should consider making use of the create vdisk file=h:\kingwindows\kingsystem
maximum=20 command.
C. You should consider making use of the create vdisk file=h:\kingwindows\kingsystem
maximum=20000 command.
D. You should consider making use of the create vdisk
file=h:\kingwindows\kingsystem.vhd maximum=20000 command.

A

Answer: D

D. You should consider making use of the create vdisk
file=h:\kingwindows\kingsystem.vhd maximum=20000 command.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
52
Q

QUESTION: 52
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows
7.During the course of the day you receive instruction from Hotcerts.com to configure
fault tolerance for an operating system on a computer running Microsoft Windows 7
Home Premium to boot in the event of a hard disk failure. Hotcerts.com additionally
informed you that the computer has two disks with unallocated space on the second disk
drive.What should you do?
70-680
A. You should consider having a RAID-1 volume created.
B. You should consider having a RAID-5 volume created.
C. You should consider having a VHD created and install an image of your computer on
the VHD. You should then make use of BCDEdit to make the VHD bootable.256 created.
D. You should consider having a RAID-0 volume created.

A

Answer: A

A. You should consider having a RAID-1 volume created.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
53
Q

Answer: A
QUESTION: 53
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7. A
network user named Rory Allen has recently requested that you copy files to a virtual hard
disk (VHD) file on the client computer.What should you do?
A. You should consider having the Diskpart.exe command run. You should then have the
Select and Attach commands run.
B. You should consider having Imagex.exe command run with specifying the /mountrw
and /append parameters.
C. You should consider having the Dism.exe command run with specifying the /image and
/online parameters.
D. You should consider having the VHD file right-clicked and select open from within
Windows Explorer.

A

Answer: A

A. You should consider having the Diskpart.exe command run. You should then have the
Select and Attach commands run.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
54
Q

QUESTION: 54
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You are currently
working on a workstation named HOTCERTS-WS680. You use the Windows
Preinstallation Environment (Windows PE) to boot HOTCERTS-WS680. You now need
to load a network adapter device driver on the Windows PE.What should you do?
A. You should consider running Drvload.exe and then specify the device driver path.
B. You should consider running the Winpeshl.exe and then specify a custom Winpeshl.ini
file.
C. You should consider using the InitializeNetwork command after you run Wpeutil.exe.
D. You should consider running Peimg.exe and then specify the device driver path.

A

Answer: A

A. You should consider running Drvload.exe and then specify the device driver path.
Explanation:
Drvload.exe is the tool used to load drivers in the PE environment. Manually load the
network driver, and then verify that it is the correct driver.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
55
Q

QUESTION: 55
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You are responsible for
a workstation named HOTCERTS-WS680 that runs Windows 7.You have just upgraded
the driver for the network adapter on HOTCERTS-WS680. After the upgrade you detect
that you are unable to access the network resources. In Device Manager you notice a
warning symbol next to the network adapter. You have to make sure that you are able to
access the network resources as soon as possible.What should you do?
A. You need to uninstall the network adapter and scan for any hardware changes.
B. You need to roll back the network adapter driver.
C. You need to disable the network adapter and scan for any hardware changes.
D. You need to assign a static IP address to the network adapter.

A

Answer: B

B. You need to roll back the network adapter driver.
Explanation:
The easiest way to fix the problem is to roll back the newly installed driver. Click on the
device in device manager, select the “Driver” tab and then click on “Roll Back Driver”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
56
Q

QUESTION: 56
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Windows 7 Professional.You are working on a client
computer named HOTCERTS-WS680 that has been assigned to a Hotcerts.com user
named Amy Walsh. You have been instructed toupdate the printer connected to
HOTCERTS-WS680 so that Amy Walsh can print graphics at a higher resolution. You
70-680
download a new printer driver from the Internet. Before you install the new printer driver
you want to ensure that the driver is compatible with Windows 7.What should you do?
A. You should view the Advanced Attributes dialog box for the printer driver file and
install the driver if the contents have been secured.
B. You should run File Signature Verification to verify that the new driver has a Microsoft
digital signature and install the driver if it does have the signature.
C. You should install the driver and logon to the computer. If the computer fails after
installing the driver, reboot the computer and select the last known good configuration to
recover the original driver.
D. You should install the driver and logon to the computer. If the computer fails after
installing the driver, reboot the computer and use the Recovery Console to recover the
original driver.

A

Answer: B

B. You should run File Signature Verification to verify that the new driver has a Microsoft
digital signature and install the driver if it does have the signature.

Explanation:
When installing new software on your computer, system files and device driver files are
sometimes overwritten by unsigned or incompatible versions, causing system instability.
The system files and device driver files provided with Windows 7 have a Microsoft digital
signature, which indicates that the files are original, unaltered system files or that they
have been approved by Microsoft for use with Windows. Using File Signature
Verification, you can identify unsigned files on your computer. You should not install the
driver if it does not have the signature if you want to prevent the loss of production time
due to incompatible driver installation that you are unsure of.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
57
Q

QUESTION: 57
Hotcerts.com has employed you as a network Administrator. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network client computers currently make use of Microsoft Windows 7. You are assigned a
client computer named HOTCERTS-WS25. To ensure your productivity you need to
make sure that the physical memory as well as the speed is increased on HOTCERTSWS25.
What should you do?
A. You should consider making use of ReadyBoost.
B. You should consider making use of PhysiRAM.
70-680
C. You should consider making use of DirectAccess.
D. You should consider making use of Aero Glass.

A

Answer: A

A. You should consider making use of ReadyBoost.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
58
Q

QUESTION: 58
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows
7.Hotcerts.com has recently deployed a client computer that is used by multiple users who
log on to the computer. The client computer currently has five removable devices attached.
During the course of the day you receive instruction from Hotcerts.com to ensure that the
network users are only able to access remove able devices which were previously installed
in the computer by modifying the Local Group Policy.What should you do?
A. You should consider having the WPD Devices: Deny read access setting disabled.
B. You should consider having the Allow administrators to override Device Installation
Restriction policies setting disabled.
C. You should consider having the Prevent redirection of USB device settings enabled.
D. You should consider having the Prevent installation of removable devices setting
enabled.

A

Answer: D

D. You should consider having the Prevent installation of removable devices setting
enabled.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
59
Q

QUESTION: 59
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.The Hotcerts.com
network contains a Windows 7 client computer named HOTCERTS-WS680.
HOTCERTS-WS680 also runs a third party accounting application named accapp.exe.
However, accapp.exe is started during the boot process. You have received instructions to
ensure that accapp.exe is only started manually and not started during the boot
process.What should you do?
A. You should consider using the local Group Policy and set the application control
policy.
B. You should consider using the System Configuration tool and use the Diagnostic
Startup.
C. You should consider using the local Group Policy and set the software restriction
policy.
70-680
D. You should consider using the System Configuration tool and set the Startup
applications.

A

Answer: D

D. You should consider using the System Configuration tool and set the Startup
applications.

Explanation:
Using the System Configuration tool (MSConfig.exe), you can select diagnostic booting or
configurate starting services or applications.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
60
Q

QUESTION: 60
You work as a Desktop Technician at Hotcerts.com. The Hotcerts.com network consists of
a single Active Directory domain named Hotcerts.com. All client computers and mobile
computers on the Hotcerts.com network run Windows 7 Professional.A Hotcerts.com user
named Kara Lang has been assigned a mobile computer named HOTCERTS-WS680.
Kara Lang is preparing a multimedia presentation on HOTCERTS- WS680. However,
Kara Lang informs you that when she plays the multimedia presentation there is no
70-680
sound.You need to enable Kara Lang to do her presentation with audio and video
playback.What should you do?
A. You should clear the ‘Allow applications to take exclusive control of this device’ check
box from the Line In Properties dialog box.
B. You should select the ‘I always give a presentation when I use this display
configuration’ check box from the Presentation settings dialog box.
C. You should configure HOTCERTS-WS680 to use the default sound scheme.
D. You should enable the ‘Presentation Settings’ option and adjust the volume settings
appropriatly.

A

Answer: D

D. You should enable the ‘Presentation Settings’ option and adjust the volume settings
appropriatly.

Explanation:
Using “ Windows Mobility Center “ you can endure that you laptop stays awake,
notifications are turned off and the screen saver is turned off. You can also adjust the
sound. The “ Windows Mobility Center “ is only available on Laptops.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
61
Q

QUESTION: 61
You work as a Desktop Technician at Hotcerts.com. The Hotcerts.com network consists of
a single Active Directory domain named Hotcerts.com. The Hotcerts.com network
contains a workstation named HOTCERTS-WS680.You have upgraded HOTCERTSWS680
from Windows XP Professional Service Pack 2 (SP2) to Windows 7 Professional.
However, when you attempt to run a custom application named HCapp.exe you receive an
error message stating: “This application is only designed to run on Windows XP or later.”
You need to configure the application to run on Windows 7.What should you do?
A. You should consider installing Windows XP Mode on HOTCERTS-WS680.
B. You should consider having the HCapp.exe application configured to run with elevated
privileges.
C. You should consider connecting to Microsoft Updates and download any available
updates.
D. You should consider modifying the HCapp.exe application properties to run in VGA
Mode.

A

Answer: A

A. You should consider installing Windows XP Mode on HOTCERTS-WS680.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
62
Q

QUESTION: 62
You work as a Desktop Technician at Hotcerts.com. The Hotcerts.com network consists of
a single Active Directory domain named Hotcerts.com. All client computers and mobile
computers on the Hotcerts.com network run Windows 7 Professional.Hotcerts.com has an
Accounts department that needs to run an accounting application named accapp.exe.
However, accapp.exe is not Windows 7 compatible and can run only on Windows XP
Professional computers. You need to ensure that the Accounts department can run
accapp.exe on their client computers.What should you do?
A. You should install Microsoft Virtual PC 2007 on each client computer in the Accounts
department.
B. You should install Windows XP Mode on each client computer in the Accounts
department.
C. You should disable the ‘User Account Control: Virtualizes file and registry write
failures to per- user locations’ policy setting on the client computers in the Accounts
department.
D. You should disable User Account Control on the client computers in the Accounts
department.

A

Answer: B

B. You should install Windows XP Mode on each client computer in the Accounts
department

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
63
Q

QUESTION: 63
Hotcerts.com has hired you as a network Administrator for their network. The
Hotcerts.com network contains 50 client computers that are configured to run Microsoft
Windows XP Professional. During the course of the day you receive an instruction from
the CIO to determine which current applications installed on the client computers is
compatible with Windows 7. You need to accomplish this task with the least amount of
administrative effort.What should you do?
A. You should consider installing Microsoft Deployment Toolkit (MDT).
B. You should consider installing Microsoft Assessment and Planning (MAP) Toolkit.
C. You should consider installing Windows Automated Installation Kit (AIK).
D. You should consider installing Microsoft Application Compatibility Toolkit (ACT).

A

Answer: D

D. You should consider installing Microsoft Application Compatibility Toolkit (ACT).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
64
Q

QUESTION: 64
You are the newly appointed network Administrator at Hotcerts.com. The Hotcerts.com
network consists of a single Active Directory domain named Hotcerts.com. All computers
70-680
on the Hotcerts.com network are configured to run Windows 7. You are in the process of
identifying the various ratings for games in Windows 7.What should you do?
A. You will find the Teen (T) rating setting in Windows 7.
B. You will find the Teen Everyone (E) rating setting in Windows 7.
C. You will find the Teen General Audience (G) rating setting in Windows 7.
D. You will find the Teen Adults Only (AO) rating setting in Windows 7.

A

Answer: A,B,D

A. You will find the Teen (T) rating setting in Windows 7.

B. You will find the Teen Everyone (E) rating setting in Windows 7.

D. You will find the Teen Adults Only (AO) rating setting in Windows 7.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
65
Q

QUESTION: 65
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7 or
Microsoft Windows XP Professional.During the course of the day a network user named
Dean Austin asked you which of the Microsoft utilities can be used when transferring user
encryption certificates from a computer that is configured to run Microsoft Windows XP
Professional to a computer configured to run Microsoft Windows 7.What should you do?
(Choose two)
A. You should consider instructing Dean Austin that the Windows Easy Transfer utility
can be used for transferring the user encryption certificates.
B. You should consider instructing Dean Austin that the Robocopy.exe utility can be used
for transferring the user encryption certificates.
C. You should consider instructing Dean Austin that the File Settings and Transfer Wizard
utility can be used for transferring the user encryption certificates.
D. You should consider instructing Dean Austin that the USMT utility can be used for
transferring the user encryption certificates.

A

Answer: A,D

A. You should consider instructing Dean Austin that the Windows Easy Transfer utility
can be used for transferring the user encryption certificates.

D. You should consider instructing Dean Austin that the USMT utility can be used for
transferring the user encryption certificates.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
66
Q

QUESTION: 66
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.
During the course of the day a network user named Rory Allen asked you what he should
download from the Microsoft Corporation Web site to obtain USMT 4.0.What should you
do?
A. You should consider instructing Rory Allen that WAIK should be downloaded from
Microsoft Corporation to obtain USMT 4.0.
B. You should consider instructing Rory Allen that Microsoft Application Compatibility
Toolkit should be downloaded from Microsoft Corporation to obtain USMT 4.0.
C. You should consider instructing Rory Allen that Windows Anytime Upgrade should be
downloaded from Microsoft Corporation to obtain USMT 4.0.
D. You should consider instructing Rory Allen that Windows Upgrade Advisor should be
downloaded from Microsoft Corporation to obtain USMT 4.0.

A

Answer: A

A. You should consider instructing Rory Allen that WAIK should be downloaded from
Microsoft Corporation to obtain USMT 4.0.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
67
Q

QUESTION: 67
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows
7.During the course of the day you create an application shim of the accounting software
for a third- party application using Microsoft Application Compatibility Toolkit (ACT).
Hotcerts.com has recently requested that you make sure the application shim is applied the
following time the application is run.What should you do?
A. You should consider having the application executable file right-clicked and modify the
compatibility settings.
B. You should consider having the application executable file right-clicked and modify the
advanced security settings.
C. You should consider having the Sdbinst.exe command run.
D. You should consider having the Msiexec.exe command run.

A

Answer: C

C. You should consider having the Sdbinst.exe command run.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
68
Q

QUESTION: 68
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You are responsible for
managing a desktop workstation named HOTCERTS-WS680. HOTCERTS-WS680 is
configured to run Windows 7. You receive an instruction to ensure that all device drivers
installed on HOTCERTS-WS680 is digitally signed.What should you do?
A. You should consider running Sigverif.exe at a command prompt on HOTCERTSWS680.
B. You should consider running Verify at a command prompt on HOTCERTS-WS680.
C. You should consider selecting the Devices by connection view from the Device
Manager on HOTCERTS-WS680.
D. You should consider clicking Scan to determine any hardware changes from the Device
Manager on HOTCERTS-WS680.

A

Answer: A

A. You should consider running Sigverif.exe at a command prompt on HOTCERTSWS680.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
69
Q

QUESTION: 69
You work as a desktop support technician at a small company named Hotcerts.com. All
Hotcerts.com users are divided into groups named HC_ADMIN, HC_SUPRT and
HC_STAFF.The Hotcerts.com network contains a stand-alone Windows 7 computer
named HOTCERTS- WS680. Several Hotcerts.com users make use of HOTCERTSWS680.
You need to prevent the Hotcerts.com users of the HC_STAFF group from
running Windows Media Player on HOTCERTS-WS680. However, all other members
must still be able to run Windows Media Player. You want to accomplish this task by
using the least amount of administrative effort.What should you do?
A. You should consider creating an executable rule from Application Control Policies on
HOTCERTS-WS680.
B. You should consider creating the default rules from Application Control Policies on
HOTCERTS-WS680.
C. You should consider creating a hash rule from Software Restriction Policies on
HOTCERTS- WS680.
D. You should consider creating a path rule from Software Restriction Policies on
HOTCERTS- WS680.

A

Answer: A

A. You should consider creating an executable rule from Application Control Policies on
HOTCERTS-WS680.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
70
Q

QUESTION: 70
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. Hotcerts.com currently
makes use of a computer named HOTCERTS-WS680 which runs Microsoft Windows 7.
HOTCERTS-WS680 is currently used by multiple Hotcerts.com network users who log on
to the computer. You have received instruction to deny a Hotcerts.com user named Mia
Hamm user access to removable devices on HOTCERTS-WS680. However, all other
users who log on to HOTCERTS-WS680 must retain access to removable devices.What
should you do?
A. You should consider altering an application control policy from the local Group Policy
on HOTCERTS-WS680.
B. You should consider altering the BitLocker Drive Encryption settings from Control
Panel on HOTCERTS-WS680.
C. You should consider altering the settings of all removable devices from Device
Manager on HOTCERTS-WS680.
D. You should consider altering a removable storage access policy from the local Group
Policy on HOTCERTS-WS680.

A

Answer: D

D. You should consider altering a removable storage access policy from the local Group
Policy on HOTCERTS-WS680.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
71
Q

QUESTION: 71
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.Hotcerts.com issues a new usage policy that
states that no Hotcerts.com user should be allowed to play video clips using Windows
Media Player. You need ensure that this policy is applied.What should you do? (Each
correct answer presents part of the solution. Choose TWO.)
A. You should create a software restriction policy.
B. You should enable auditing on the use of wmplayer.exe for all users.
C. You should create a logon script that uninstalls Windows Media Player.
D. You should create a path rule to restrict the use of wmplayer.exe

A

Answer: A,D

A. You should create a software restriction policy.

D. You should create a path rule to restrict the use of wmplayer.exe

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
72
Q

QUESTION: 72
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.A software restriction policy has been
implemented for the Finance department and the default security level for the policy has
been set to Disallow. The Finance department now needs to run a custom application
named FinApp.exe.You now need to configure the software restriction policy to allow
Hotcerts.com users in the Finance department to run FinApp.exe. However, they should
not be allowed to run any other unauthorized applications.What should you do?
70-680
A. You should set the default security level of the software restriction policy to
Unrestricted.
B. You should add FinApp.exe to the Designated File Types.
C. You should create a new path rule for FinApp.exe.
D. You should set the default security level of the software restriction policy to Basic
User.

A

Answer: C

C. You should create a new path rule for FinApp.exe.

Explanation:
To configure the software restriction policy to allow Finance department users to run
FinApp.exe and make sure that they are not allowed to run any other unauthorized
applications, you need to create a new path rule for FinApp.exe and then set the rule to
Unrestricted.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
73
Q

QUESTION: 73
Hotcerts.com has employed you as a network Administrator. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All servers on the
Hotcerts.com network run Windows Server 2008 and all client computers run Windows 7.
Hotcerts.com has three custom financial applications that are digitally signed. For security
purposes Hotcerts wants you to devise a security policy that will only enable company
approved digital signed applications to run.What should you do?
A. Your best option would be to have a software restriction policy as well as a hash rule
created.
B. Your best option would be to have an AppLocker Windows Installer rule created.
C. Your best option would be to have an AppLocker executable rule created.
D. Your best option would be to have a software restriction policy as well as a certificate
rule created.

A

Answer: C

C. Your best option would be to have an AppLocker executable rule created.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
74
Q

QUESTION: 74
70-680
Hotcerts.com has employed you as a network Administrator. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network client computers are configured to run Windows 7. You are assigned a computer
named HOTCERTS- SR05. During the course of the day you receive an instruction from
the CIO to identify the applications that was installed on HOTCERTS-SR05 the previous
week. You need to gather this information as soon as possible.What should you do?
(Choose all that apply.)
A. You should be able to locate this information by checking the Windows System
Change Log in the Control Panel.
B. You should be able to locate this information by reviewing the informational events
from the Reliability Monitor.
C. You should be able to locate this information by checking the Windows System
Diagnostics Report under the Performance Monitor MMC.
D. You should be able to locate this information by viewing all events in the Applications
Log that is under the Windows Logs in the System and Security component section of the
Control Panel.

A

Answer: B,D

B. You should be able to locate this information by reviewing the informational events
from the Reliability Monitor.

D. You should be able to locate this information by viewing all events in the Applications
Log that is under the Windows Logs in the System and Security component section of the
Control Panel.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
75
Q

QUESTION: 75
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.
During the course of the day you receive instruction from Hotcerts.com to deny the
network users execute, write and read access to all types of external storage devices for
security reasons.What should you do?
A. You should consider making use of the Removable Disks: Deny Read Access computer
policy setting.
B. You should consider making use of the Removable Disks: Deny Write Access
computer policy setting.
C. You should consider making use of the All Removable Storage: Allow Direct Access In
Remote Sessions computer policy setting.
D. You should consider making use of the All Removable Storage Classes: Deny All
Access computer policy setting.

A

Answer: D

D. You should consider making use of the All Removable Storage Classes: Deny All
Access computer policy setting.

76
Q

QUESTION: 76
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows
7.During the course of the day you receive instruction from Hotcerts.com to have a
70-680
standalone computer configured to prevent the non-administrative network users from
using the Device Manager whilst ensuring that the network users are able to access the
Event Viewer.What should you do?
A. You should consider having the application control policies from the local computer
policy modified.
B. You should consider having the Microsoft Management Console (MMC) settings
modified from the local computer policy.
C. You should consider having the default settings for media and devices from Control
Panel modified.
D. You should consider having the default settings for device installation from Control
Panel modified.

A

Answer: B

B. You should consider having the Microsoft Management Console (MMC) settings
modified from the local computer policy.

77
Q

QUESTION: 77
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers
run Microsoft Windows 7.You are assigned a client computer named HOTCERTSWS680.
You want to modify the file extensions on HOTCERTS-WS680 that are linked to
Internet Explorer.What should you do?
A. You should consider opening Default Programs and selecting Set Associations from the
Control Panel.
B. You should consider right-clicking %programfiles%\Internet Explorer\iexplore.exe and
selecting Properties from Window Explorer.
C. You should consider expanding Computer Configuration and selecting Software
Settings from the local Group Policy.
D. You should consider selecting Tools and then Manage Add-ons from Internet Explorer.

A

Answer: A

A. You should consider opening Default Programs and selecting Set Associations from the
Control Panel.

78
Q

QUESTION: 78
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network contains internal Web site that uses Integrated Windows Authentication.A
Hotcerts.com user named Amy Walsh has been assigned a workstation named
HOTCERTS- WS680 that is running Windows 7. Amy Walsh reports that she is prompted
70-680
for authentication when she attempts to access the internal Web site. You verify that Amy
Walsh’s user account has permission to access the internal Web site. You need to make
sure that authentication occurs automatically when Amy Walsh attempts to connect the
Web site.What should you do?
A. You should consider adding the Web site’s URL to the Local zone on HOTCERTSWS680.
B. You should consider creating a difficult password for Amy Walsh’s user account.
C. You should consider changing the credentials for Amy Walsh in the Credential
Manager.
D. You should consider adding the Web site’s URL to the Trusted sites zone on
HOTCERTS- WS680.

A

Answer: A

A. You should consider adding the Web site’s URL to the Local zone on HOTCERTSWS680.

79
Q

QUESTION: 79
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network contains an intranet Web site.A Hotcerts.com user named Robbie Blake has been
assigned a workstation named HOTCERTS-WS680 that is running Windows 7. Robbie
Blake reports that he can access the internal web site but he cannot access web sites on the
internet when he starts Internet Explorer. You open Internet Explorer on HOTCERTSWS680
as shown in the exhibit:
You need to ensure that Robbie Blake can access websites on both the Internet and the
intranet.What should you do?
A. You should consider selecting Work Offline from the Tools menu on HOTCERTSWS680.
B. You should consider selecting InPrivate Blocking from the Safety menu on
HOTCERTS- WS680.
C. You should consider selecting InPrivate Browsing from the Safety menu on
HOTCERTS- WS680.
D. You should consider adding the intranet Web site to the Trusted sites zone from the
Security tab on HOTCERTS-WS680.
70-680

A

Answer: A

A. You should consider selecting Work Offline from the Tools menu on HOTCERTSWS680.

80
Q

QUESTION: 80
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.A Hotcerts.com user
named Mia Hamm currently makes use of a computer named HOTCERTS-WS680 which
runs Microsoft Windows 7. You want to configure HOTCERTS- WS680 to prevent
Microsoft Internet Explorer from saving any data when Mia Hamm browses the
Internet.What should you do?
A. You should consider disabling the InPrivate Blocking list on HOTCERTS-WS680.
B. You should consider disabling the BranchCache service on HOTCERTS-WS680.
C. You should consider opening an InPrivate Browsing session on HOTCERTS-WS680.
D. You should consider disabling the security settings for the Internet zone on
HOTCERTS- WS680.

A

Answer: C

C. You should consider opening an InPrivate Browsing session on HOTCERTS-WS680.

81
Q

QUESTION: 81
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Windows 7 Professional.A Hotcerts.com user named Andy
Reid currently makes use of a computer named HOTCERTS- WS680. You want to
configure HOTCERTS-WS680 to make sure that the temporary Internet files are deleted
immediately whenever Andy Reid closes Internet Explorer.What should you do?
A. You should consider modifying the properties of the Recycle Bin on HOTCERTSWS680.
B. You should consider modifying the advanced settings from the Internet Options on
HOTCERTS-WS680
C. You should consider modifying the security level for the Internet zone from the Internet
Options on HOTCERTS-WS680.
D. You should consider modifying the permissions of the %systemroot%\temp\history
folder on HOTCERTS-WS680.

A

Answer: B

B. You should consider modifying the advanced settings from the Internet Options on
HOTCERTS-WS680

82
Q

QUESTION: 82
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.
Hotcerts.com currently has an internal Web site that uses HTTPs and has a self-signed
70-680
certificate.A network user named Rory Allen makes use of Internet Explorer 8 to browse
the internal Web site. During the course of the day you receive complaints from Rory
Allen that he receives the error message when attempting to browse the internal Web site:
“There is a problem with the website’s security certificate”.Hotcerts.com wants you to
prevent the warning message from appearing when Rory Allen or other users access the
internal Web site.What should you do?
A. You should consider having the Web sites certificate imported into the Trusted Root
Certification Authorities store from Certificate Manager.
B. You should consider having the Web sites certificate imported into Rory Allen’s
personal store from Certificate Manager.
C. You should consider having InPrivate Browsung enabled from Internet Explorer.
D. You should consider having Web site added to the Trusted sites zone from Internet
Explorer.

A

Answer: B

B. You should consider having the Web sites certificate imported into Rory Allen’s
personal store from Certificate Manager.

83
Q

QUESTION: 83
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. Hotcerts.com has
itsheadquarters in London and a branch office in Paris.The relevant portion of the
Hotcerts.com network is shown in the following exhibit:

You have just deploy a Windows 7 workstation named HOTCERTS-WS680 at the Paris
office. You now need to assign an IP address to the worksation. What should you do?

A. You should consider assigning the IP address 192.168.5.193 to HOTCERTS-WS680.
B. You should consider assigning the IP address 192.168.5.126 to HOTCERTS-WS680.
C. You should consider assigning the IP address 192.168.5.40 to HOTCERTS-WS680.
D. You should consider assigning the IP address 192.168.5.94 to HOTCERTS-WS680.

A

Answer: C
Explanation:
Correct Answer 192.168.5.40. Using an IP address like 192.168.5.52/27 is a shorthand
way of indentifying the subnet mask. The /27 means that the first 27 bits of the IP address
is the net mask. In this case 255.255.255.224. So the range of the available IP addresses
for computers is limited to 192.168.5.33-62. The only IP address listed in that range is
198.158.5.40.The range starts at 33 because in the IP address given (192.168.5.40) the last
octet number is 40.40 includes the number 32 which is 27th bit in the subnet mask. This
means that the subnet ends at 32 and so workstations must begin at 33. Or in other words,
the address of the the subnet is 192.168.5.32. This answer is the same regardless of the
first three octet values. Even if the IP address was 192.168.2.62, the results are the same.

84
Q

QUESTION: 84
You work as the network administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All servers on the
Hotcerts.com network run Windows Server 2008 and all client computers run Windows 7.
70-680
All client computers are configured as Dynamic Host Configuration Protocol (DHCP)
clients.Hotcerts.com users connect to a file server named HOTCERTS-SR01 that hosts
several shared folders. A fellow network administrator relocates HOTCERTS-SR01 to
another network segment. However, after the HOTCERTS-SR01 is relocated, numerous
Hotcerts.com users complain that they are unable to access the shared folders on
TESTING-SR01. You need to make sure that Hotcerts.com users can connect to
HOTCERTS-SR01 and access the shared folders on HOTCERTS-SR01.What should do?
A. You should instruct all Hotcerts.com users to run ipconfig /displaydns from a command
prompt window on their client computers.
B. You should instruct all Hotcerts.com users to run netsh interface ip set dns from a
command prompt window on their client computers.
C. You should instruct all Hotcerts.com users to run ipconfig /release and ipconfig /renew
from a command prompt window on their client computers.
D. You should instruct all Hotcerts.com users to run ipconfig /flushdns and then ipconfig
/registerdns from a command prompt window on their client computers.

A

Answer: D

D. You should instruct all Hotcerts.com users to run ipconfig /flushdns and then ipconfig
/registerdns from a command prompt window on their client computers.

Explanation:
The ipconfig / flushdns command is used to flush and reset the contents of the DNS client
resolver cache. The workstations that communicated with HOTCERTS-SR01 prior to the
move cached the server’s IP address in their DNS cache. It is therefore a possibility that
those workstations are retrieving their IP address from the cache. It does not query the
DNS server for the IP address. This type of situation will continue until the cached
records expire. The ipconfig / registerdns command is used for manual dynamic
registration for the DNS names and IP addresses that are configured at a workstation.

85
Q

QUESTION: 85
You are employed as a network administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Microsoft Windows 7.A Hotcerts.com user named Dean
Austin has been assigned a client computer named HOTCERTS-WS623. HOTCERTSWS623
has been configured to use the 192.168.16.35 IP address and the 255.255.255.0
Subnet mask. HOTCERTS-WS623 has also been configured to use 192.168.18.3 as the
DNS Server address. The following exhibit shows the HOTCERTS- WS623 IP
configuration.
70-680
You need to ensure that Dean Austin can make use of HOTCERTS-WS623 to connect to
resources on other subnets.What should you do?
A. You need to configure the default gateway as 192.168.16.1.
B. You need to configure the default gateway as 192.168.16.35.
C. You need to configure the default gateway as 192.168.18.1.
D. You need to configure the preferred DNS server as 192.168.16.35.

A

Answer: A

A. You need to configure the default gateway as 192.168.16.1.

Explanation:
To connect to other subnets, you need to configure HOTCERTS-WS623 with a default
gateway. The default gateway is usually the address of the internal interface of the
network router. The question doesn’t tell us what address of the internal interface of the
70-680
network router is but we know that it needs to be an address in the same subnet as
HOTCERTS-WS623. From the answers given, the only address that would apply is
192.168.16.1.

86
Q

QUESTION: 86
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.The Hotcerts.com network is connected to the
Internet through ha router with an internal IP address of 192.168.16.12 and an external IP
address of 198.207.16.19. You add a new Windows 7 client computer named
HOTCERTS-WS680 to the network. You configure HOTCERTS- WS680 with the IP
address of 192.168.16.35 and a subnet mask of 255.255.255.0. You need to ensure that
HOTCERTS-WS680 is able to access the Internet.What should you do?
A. You should set the IP address for HOTCERTS-WS680 to 198.164.16.35.
B. You should set the subnet mask for HOTCERTS-WS680 to 255.255.0.0.
C. You should set the default gateway on HOTCERTS-WS680 to 198.164.16.19.
D. You should set the default gateway on HOTCERTS-WS680 to 192.168.16.12.

A

Answer: D

D. You should set the default gateway on HOTCERTS-WS680 to 192.168.16.12.

87
Q

QUESTION: 87
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.You are working on a client computer named
HOTCERTS-WS680. You want to release the DHCP assigned IP configuration of
HOTCERTS-WS680. However, when you run the ipconfig /release command you receive
the error message stating that elevated permissions are required.What should you do?
A. You should consider right-clicking the command prompt and select Run as
administrator and user the ipconfig /release command.
B. You should consider logging on as an administrator and open the command prompt to
run the ipconfig /all command.
C. You should consider opening the Command Prompt and run the ipconfig /release /high
command.
D. You should consider having Parental Controls disabled and open the Command Prompt
to run ipconfig /all command.

A

Answer: A

A. You should consider right-clicking the command prompt and select Run as
administrator and user the ipconfig /release command.

88
Q

QUESTION: 88
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The Hotcerts.com network
currently consists of two office named Detroit and Miami which are on an isolated private
wired subnet. The servers on the network run Microsoft Windows Server 2008 and the
client computers run Microsoft Windows 7.During the course of the day you configure
Detroit with an IPv4 address 172.28.34.140 with a subnet mask of 255.255.255.0.
Hotcerts.com additionally requested you configure the Miami office with an IPv4 address
172.28.34.210 with a subnet mask 255.255.255.0. During your routine maintenance you
ping Detroit entering 172.28.34.140 and the command times out. You later try pinging
Miami entering 172.28.34.210 and discover that you fail to locate the Miami computer
IPv4 address. Hotcerts.com wants you to determine what could be causing the
problem.What should you do?
A. You should inform Hotcerts.com that the problem could be caused by not specifying a
default gateway.
B. You should inform Hotcerts.com that the problem could be caused by not permitting
ICMPv4 traffic through firewalls on both computers.
C. You should inform Hotcerts.com that the problem could be caused by the DNS service
not being available on the subnet.
D. You should inform Hotcerts.com that the problem could be caused by the computer
being on different subnets.

A

Answer: B

B. You should inform Hotcerts.com that the problem could be caused by not permitting
ICMPv4 traffic through firewalls on both computers.

89
Q

QUESTION: 89
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network is configured to use IPv6 addressing.You have installed Windows 7 on a client
computer named HOTCERTS-WS680 and have used automatic IPv6 addressing on
HOTCERTS-WS680. You want to verify the IPv6 address of HOTCERTS-WS680.What
should you do?
A. You should consider running the Net config command from the command prompt on
HOTCERTS-WS680.
70-680
B. You should consider selecting Details from the network connection status on
HOTCERTS- WS680.
C. You should consider selecting Internet Protocol Version 6 (TCP/IPv6) and then
Properties from network connection properties on HOTCERTS-WS680.
D. You should consider running the Netstat command from the command prompt on
HOTCERTS-WS680.

A

Answer: B

B. You should consider selecting Details from the network connection status on
HOTCERTS- WS680.

90
Q

QUESTION: 90
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.A Hotcerts.com user named Amy Wilson has
been assigned a client computer named HOTCERTS-WS680. HOTCERTS-WS680 is
connected directly to the Internet. You have received instruction to configure
HOTCERTS-WS680 with an Internet Protocol version 6 (IPv6) address similar to a public
IPv4 address. You need to determine the unicast address that needs to be configured on
HOTCERTS-WS680.What should you do?
A. You should consider using a unique local address as the appropriate IPv6 address type.
B. You should consider using a link-local address as the appropriate IPv6 address type.
C. You should consider making use of a site-local address as the appropriate IPv6 address
type.
D. You should consider using a global unicast address as the appropriate IPv6 address
type.

A

Answer: D

D. You should consider using a global unicast address as the appropriate IPv6 address
type.

91
Q

QUESTION: 91
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.You are working on a client computer named
HOTCERTS-WS680. You have been instructed to configure HOTCERTS-WS620 with
2001::e45d:691a:f:4ac2.What should you do?
A. You should manually assign 2001::e45d:691a:f:4ac2 as the MAC address.
B. You should manually assign 2001::e45d:691a:f:4ac2 as a DNS suffix search item.
70-680
C. You should manually assign 2001::e45d:691a:f:4ac2 as a WEP key for a wireless
network.
D. You should manually assign 2001::e45d:691a:f:4ac2 as the IPv6 address.

A

Answer: D

D. You should manually assign 2001::e45d:691a:f:4ac2 as the IPv6 address.

Explanation:
The format of the address 2001: :e45d:691a:f:4ac2 tells us that this is an IPv6 address and
therefore Kara Lang needs to configure her network connection by entering
2001::e45d:691a:f:4ac2 in the IPv6 address properties.

92
Q

QUESTION: 92
You are employed as the network Administrator at Hotcerts.com. The Hotcerts.com
network is configured to make use of IPv6. You are responsible for managing a computer
named HOTCERTS-SR04. You receive a request from the CIO to create a DNS record
that will allow users to connect to HOTCERTS-SR04 using dec.Hotcerts.com. You thus
need to identify the appropriate record you should request.What should you do?
A. Your best option would be to request a NAPTR record.
B. Your best option would be to request HINFO record.
C. Your best option would be to request AAAA record.
D. Your best option would be to request an A record.

A

Answer: C

C. Your best option would be to request AAAA record.

93
Q

QUESTION: 93
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.
Hotcerts.com has recently deployed two client computers to the network configured with
the IPv6 addresses shown in the table below:During the course of the day you receive
instruction from Hotcerts.com to test the IPv6 address connection from HOTCERTSWS01
to HOTCERTS-WS02.What should you do?
A. You should consider having the ping -r fe80::34df:1a54%11 command run.
B. You should consider having the ping -r fe80::34df:1a54%13 command run.
C. You should consider having the ping -6 fe80::34df:1a54%11 command run.
70-680
D. You should consider having the ping -6 fe80::34df:1a54%13 command run.

A

Answer: D

D. You should consider having the ping -6 fe80::34df:1a54%13 command run.

94
Q

QUESTION: 94
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network contains several mobile computers that connect to the network via a wireless
access point (WAP).You are working on a mobile computer named HOTCERTS-WS680
that is running Windows 7. The network administrator has disabled the Service Set
Identifier (SSID) broadcasts on the wireless access point (WAP). However, when you
attempt to connect HOTCERTS-WS680 to the network you discover that you cannot
access the WAP. You need to enable HOTCERTS-WS680 to access the wireless access
point (WAP).What should you do?
A. You should consider changing the wireless network connection setting on
HOTCERTS- WS680.
B. You should consider changing the Windows credentials on HOTCERTS-WS680.
C. You should consider enabling Network discovery on HOTCERTS-WS680.
D. You should consider changing the generic credentials on HOTCERTS-WS680.

A

Answer: A

A. You should consider changing the wireless network connection setting on
HOTCERTS- WS680.

95
Q

QUESTION: 95
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.You have received instructions to install a new
hardware router that provides wireless network connectivity between a mobile computer
named HOTCERTS-WS680 and the Internet. You connect HOTCERTS-WS680 to the
router by using a wireless network adapter and verify that HOTCERTS-WS680 can
connect successfully to the Internet. However, HOTCERTS-WS680 is unable to discover
other computers in the local wireless network. You need to ensure that HOTCERTSWS680
can discover other computers on the local wireless network.What should you do?
A. You should configure the wired and wireless network adapters as a network bridge.
B. You should change the Network Category setting of the wireless connection to Public.
C. You should turn off the Windows Firewall feature on HOTCERTS-WS680.
D. You should configure the network category of your wireless network connection to
Private.

A

Answer: D

D. You should configure the network category of your wireless network connection to
Private.

Explanation:
If the network category of the wireless connection is set to public, the network discovery
feature is disabled. As the wireless connection is ‘inside’ the network (behind the router),
you can safely configure the wireless connection network category to private. This will
enable the network discovery feature.

96
Q

QUESTION: 96
You are employed as a network administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All mobile computers
on the Hotcerts.com network run Microsoft Windows 7. The Hotcerts.com network has a
wireless access point (WAP) that all mobile computers use to access the network. Service
Set Identifier (SSID) broadcasts on the wireless access point (WAP) have been
disabled.You add a new Windows 7 mobile computer named HOTCERTS-WS680 to the
network. You need to configure HOTCERTS-WS680 to connect to the wireless
network.What should you do?
A. You should click the ‘Set up a connection or network’ link and select the ‘Set up a
wireless Ad hoc network’ option.
B. You need to click the ‘Connect to a network’ link, then right-click the appropriate
network and select the ‘Connect’ option.
C. You should click the ‘View computers and devices’ link, then right-click the wireless
access point (WAP) and select the ‘Enable’ option.
D. You should click the ‘Set up a connection or network’ link and select the ‘Manually
connect to a wireless network’ option.

A

Answer: D

D. You should click the ‘Set up a connection or network’ link and select the ‘Manually
connect to a wireless network’ option.

Explanation:
A wireless access point can be configured to broadcast its SSID ( it’s name) or not to
broadcast it. If the wireless access point is configured to not broadcast, it won’t show up in
the list of available networks in your wireless networks box. You can however still
connect to the network if you know it’s SSID. To do this, you need to click the Manually
connect to a wireless network option in the Set up a connection or network window and
enter the SSID (name) of the wireless network you wish you connect to.

97
Q

QUESTION: 97
You are employed as a network administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Microsoft Windows 7.You have just installed a wireless
network adapter on a client computer named HOTCERTS- WS680. However,
HOTCERTS-WS680 is unable to connect to the local wireless network. You need to
ensure that HOTCERTS-WS680 is able to connect to the local wireless network.What
should you do?
A. You should change the ‘Network Category’ setting of the wireless connection to
‘Public’.
B. You should configure the wireless network adapter to connect to the appropriate
wireless network from the ‘Connect to a network’ list.
C. You should rename the wireless network adapter to match the Service Set Identifier
(SSID) of the wireless network.
D. You should enable the ‘Internet Connection Sharing’ feature on the wireless network
adapter.

A

Answer: B

B. You should configure the wireless network adapter to connect to the appropriate
wireless network from the ‘Connect to a network’ list.

Explanation:
To connect to a wireless network, you need to configure a connection to the wireless
network.You can do this by configuring the wireless network adapter to connect to the
appropriate wireless network from the Connect to a network list. The Connect to a
network list will list the available networks you can connect to. Select the network and
click Connect.

98
Q

QUESTION: 98
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Windows 7.The Hotcerts.com network contains a wireless
access point (WAP) that is configured to use Advanced Encryption Standard (AES)
security. However, you do not have a pre-shared key configured on the wireless access
point. You have received instructions to connect a mobile computer named HOTCERTSWS680
to the wireless access point.What should you do?
A. You should consider using the 802.1x for the wireless connection.
B. You should consider using the WPA2-Enterprise for the wireless connection.
C. You should consider using the WPA2-Personal for the wireless connection.
D. You should consider using the WPA-Personal for the wireless connection.

A

Answer: B

B. You should consider using the WPA2-Enterprise for the wireless connection.

99
Q

QUESTION: 99
Hotcerts.com has hired you as a network Administrator for their network. All servers on
the Hotcerts.com network run Windows Server 2008 and all mobile computers run
Windows 7. You are assigned a computer named HOTCERTS-WS20. You create an
Encrypting File System (EFS) recovery key and certificate shown in the exhibit below: To ensure productivity you need to make sure that your user account is able to decrypt the
EFS files on HOTCERTS-WS20.What should you do?
A. This can be accomplished by modifying the Restore files and directories setting from
the local computer policy.
B. This can be accomplished by adding a Windows credential from the Credential
Manager.
C. This can be accomplished by adding a certificate-based credential from the Credential
Manager.
D. This can be accomplished by adding a data recovery agent from the local computer
policy.

A

Answer: D

D. This can be accomplished by adding a data recovery agent from the local computer
policy.

100
Q

QUESTION: 100
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.
Hotcerts.com recently deployed a server named HOTCERTS-SR01 which runs a custom
network application. The IP configuration of HOTCERTS-SR01 is shown in the table
below:During the course of the day you receive instruction from Hotcerts.com to ensure
that the client computer resolves HOTCERTS-SR01.Hotcerts.com to only the
192.168.45.23 IP address.What should you do?
A. You should consider having the Ipconfig.exe /flushdns command run.
B. You should consider having the Netsh interface ipv4 reset command run.
C. You should consider having the Hosts file edited.
D. You should consider having the Lmhosts file edited.

A

Answer: C

C. You should consider having the Hosts file edited.

101
Q

QUESTION: 101
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.
Hotcerts.com has recently deployed a client computer named HOTCERTS-WS01 and
shared a folder on the disk drive. During the course of the day you receive instruction from
Hotcerts.com to configure HOTCERTS-WS01 to ensure the requirements below are
met:HOTCERTS-WS01 should be configured to allow computers in the local subnet to
access the shared folder.HOTCERTS-WS01 should be configured to stop computers in
remote subnets from accessing the shared folder.HOTCERTS-WS01 should be configured
to allow all client computers to connect to HOTCERTS-WS01 using Remote
Desktop.What should you do?
70-680
A. You should consider having the network discovery disables on all computers located in
remote subnets.
B. You should consider having the properties of the File and Printer Sharing firewall
exceptions modified.
C. You should consider having the subnet mask modified.
D. You should consider having the Public folder sharing settings modified.

A

Answer: B

B. You should consider having the properties of the File and Printer Sharing firewall
exceptions modified.

102
Q

QUESTION: 102
You are the newly appointed network Administrator at Hotcerts.com. The Hotcerts.com
network consists of a single IPv4 subnet that contains 15 computers. The computers are all
configured to run Windows 7.You are in the process of adding a new computer named
HOTCERTS-WS16 with an IP address of 192.168.34.42 to the IPv4 subnet. After the
installation you discover that you are unable to connect to the other computers on the
network, however, the other computers are able to make a connection to each other. To
ensure productivity you need to make sure that you are able to connect to the other
computers on the network.What should you do?
A. This can be accomplished by having a static TCP/IP address configured.
B. This can be accomplished by running Netsh.exe interface ipv4 install.
C. This can be accomplished by turning off the Windows Firewall.
D. This can be accomplished by running Ipconfig.exe /renew.

A

Answer: A

A. This can be accomplished by having a static TCP/IP address configured.

103
Q

QUESTION: 103
You are the newly appointed network Administrator at Hotcerts.com. The Hotcerts.com
network consists of a single Active Directory domain named Hotcerts.com. All client
computers on the Hotcerts.com network are configured to run Windows 7. All users
currently make use of a router that the company is connected to. The Default Gateway is
set to 192.168.67.1 with a subnet mask of 255.255.255.0. You need to determine the
correct IP Address for the network.What should you do?
A. You should consider identifying 169.172.1.254 as the IP Address.
B. You should consider identifying 192.168.67.30 as the IP Address.
C. You should consider identifying 169.254.2.10 as the IP Address.
D. You should consider identifying 173.16.10.1 as the IP Address.

A

Answer: B

B. You should consider identifying 192.168.67.30 as the IP Address.

104
Q

QUESTION: 104
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
contains several File Transfer Protocol (FTP) servers. You are working on a Windows 7
client computer named HOTCERTS-WS680.You have received instruction to ensure that
HOTCERTS-WS680 can only connect to the File Transfer Protocol (FTP) servers when it
is connected to a private network.What should you do?
A. You should consider changing the application control policies from the local Group
Policy on HOTCERTS-WS680.
B. You should consider changing the Advanced Sharing settings from the Network and
Sharing Center Policy on HOTCERTS-WS680.
C. You should consider changing the Allowed Programs and Features list from the
Windows Firewall Policy on HOTCERTS-WS680.
D. You should consider creating a new rule from the Windows Firewall with Advanced
Security Policy on HOTCERTS-WS680.

A

Answer: D

D. You should consider creating a new rule from the Windows Firewall with Advanced
Security Policy on HOTCERTS-WS680.

105
Q

QUESTION: 105
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. Hotcerts.com has its
headquarters in London and a branch office in Manchester. All the client computers on the
Hotcerts.com network run Windows 7. The network administrator at the London office
has enabled BranchCache.You work on a client computer named HOTCERTS-WS680.
When you run the Netsh command on HOTCERTS-WS680 you received the output as
shown in the following exhibit:
You need to make sure that the client computers at the Manchester office can access the
cached content on HOTCERTS-WS680.What should you do?
A. You should consider configuring the BranchCache service to start automatically.
B. You should consider enabling Internet Information Services (IIS).
70-680
C. You should consider changing the Windows Firewall with Advanced Security rules.
D. You should consider configuring the computer as a hosted cache client.

A

Answer: C

C. You should consider changing the Windows Firewall with Advanced Security rules.

106
Q

QUESTION: 106
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. All client computers on the
Hotcerts.com network run Microsoft Windows 7.The Hotcerts.com network contains a
client computer named HOTCERTS-WS680. HOTCERTS-WS680 is configured to use
both wired and wireless network connections. The networks are not connected to each
other. All incoming connections on the wireless connection are disallowed in Microsoft
Windows Firewall on HOTCERTS-WS680.You create a shared folder name HCDocs on
HOTCERTS-WS680. However, the Hotcerts.com users on the wireless network cannot
access the shared folder. You need to ensure that all Hotcerts.com users are able access to
the shared folder from the wireless network while maintaining the security of the wired
network .What should you do?
A. You should turn off the Spyware and other malware protection option.
B. You should enable the File and Printer Sharing exception in the firewall settings of the
wireless network adapter.
C. You should turn off the Windows Firewall feature.
D. You should disable the Block all incoming connections option.

A

Answer: B

B. You should enable the File and Printer Sharing exception in the firewall settings of the
wireless network adapter.

Explanation:
You need to enable connections to a shared folder. Therefore, we need to enable inbound
connections on the ports used for accessing shared folders. Windows Firewall makes this
easy in that you can simply enable the File and Printer Sharing exception in the firewall
settings. This will allow inbound connections on the necessary ports.

107
Q

QUESTION: 107
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.A new 32-bit third-party accounting application
named accapp.exe has just been installed on a computer named HOTCERTS-WS680. The
32-bit third-party accounting application uses port 80 to negotiate a listening port. After
establishing the listening port, the application uses dynamic ports above port 6000. You
need to configure Microsoft Windows Firewall to allow traffic for the accapp.exe
application.What should you do?
A. You should restore the Windows Firewall defaults on HOTCERTS-WS680.
B. You should add a program exception for the accapp.exe application.
C. You should add a port exception for port 80 on HOTCERTS-WS680.
D. You should disable the Core Networking exception on HOTCERTS-WS680.

A

Answer: B

B. You should add a program exception for the accapp.exe application.

108
Q

QUESTION: 108
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. Hotcerts.com wants prevent all
inbound traffic to the Windows 7 computers without the end user being notified.What
should you do?
A. You should enable the Windows Firewall and deselect all entries in the exception list.
B. You should set the network location to Public from the Network and Sharing Center.
C. You should set the network location to Private from the Network and Sharing Center.
D. You should enable the Windows Firewall and select the ‘Block all incoming
connections’ check box.

A

Answer: D

D. You should enable the Windows Firewall and select the ‘Block all incoming
connections’ check box.

109
Q

QUESTION: 109
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows
7.During the course of the day you created a HomeGroup on the computer of a network
user named Mia Hamm. Hotcerts.com has recently requested that you secure the Home
group whilst ensuring the security requirements set below are met:You should have access
70-680
to the HomeGroup allowed when connected to private networks.You should have access
to the HomeGroup blocked when connected to public networks.What should you do?
A. You should consider having the HomeGroup exception in Windows Firewall
configured to include Home or work (private) networks whilst blocking Public networks.
B. You should consider having the File and Printer Sharing exception in Windows
Firewall configured to include Home or work (private) networks whilst blocking Public
networks.
C. You should consider having the advanced sharing settings from Network and Sharing
Center modified.
D. You should consider having the advanced sharing settings from HomeGroup setting in
Control Panel modified.

A

Answer: A

A. You should consider having the HomeGroup exception in Windows Firewall
configured to include Home or work (private) networks whilst blocking Public networks.

110
Q

QUESTION: 110
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network contains two client computers named HOTCERTS-WS680 and HOTCERTSWS682.
Both HOTCERTS-WS680 and HOTCERTS-WS682 run Microsoft Windows
7.You want to ensure that you can use HOTCERTS-WS680 to remotely execute
commands on HOTCERTS-WS682.What should you do?
A. You should consider enabling Windows Remote Management (WinRM) through
Windows Firewall on HOTCERTS-WS682.
B. You should consider enabling Windows Remote Management (WinRM) through
Windows Firewall on HOTCERTS-WS680.
C. You should consider running the Winrm quickconfig command on HOTCERTSWS682.
D. You should consider running the Winrm quickconfig command on HOTCERTSWS680.

A

Answer: C

C. You should consider running the Winrm quickconfig command on HOTCERTSWS682.

111
Q

QUESTION: 111
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.You have been assigned a client computer
named HOTCERTS-WS680. To manage the computers on the corporate network
effectively, you want to view the security events logged on all client computers on the
network. You decided to collect the copies of events from multiple remote computers and
store them on HOTCERTS-WS680. You also want to ensure that the events are encrypted
when they are forwarded to HOTCERTS-WS680.What should you so? (Each correct
answer presents part of the solution. Choose THREE.)
A. You should ensure that Windows Remote Management (WinRM) service and the
Windows Event Collector service are running on computers participating in the
forwarding and collecting process
B. You should ensure that a Windows Firewall exception for Remote Event Log
Management is configured on each source computer.
C. You should ensure that the computer account of HOTCERTS-WS680 is added to the
local Administrators group on each of the source computers.
D. You should ensure that all users have a user certificate and Certificate Propagation
service startup type is set to automatic.
E. You should ensure that all computers have a computers certificate and port 443 is open
on the Windows firewall.

A

Answer: A,C,E

A. You should ensure that Windows Remote Management (WinRM) service and the
Windows Event Collector service are running on computers participating in the
forwarding and collecting process

C. You should ensure that the computer account of HOTCERTS-WS680 is added to the
local Administrators group on each of the source computers.

E. You should ensure that all computers have a computers certificate and port 443 is open
on the Windows firewall.

112
Q

QUESTION: 112
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows
7.Hotcerts.com has two client computers named HOTCERTS-WS01 and HOTCERTSWS02
which have Windows Remote Management (WinRM) enabled. During the course
of the day you receive instruction from Hotcerts.com to have an additional disk volume
created remotely on HOTCERTS-WS01 using HOTCERTS-WS02.What should you do?
A. You should consider having the Telnet Client installed.You should then run the
Diskpart command from HOTCERTS-WS02.
B. You should consider having the Telnet Client installed.You should then make use of
Disk Management from HOTCERTS-WS02.
70-680
C. You should consider having the Winrs command run and then running the Diskpart
command on HOTCERTS-WS02.
D. You should consider having the Winrs command run and then running the
Diskmgmt.msc command on HOTCERTS-WS02.

A

Answer: C

C. You should consider having the Winrs command run and then running the Diskpart
command on HOTCERTS-WS02.

Explanation:
Windows Remote Management (known as WinRM ) is a handy new remote management
service for Windows Server 2003 R2, Windows Vista, and Windows Server 2008.
WinRM is the “server” component of this remote management application and WinRS
(Windows Remote Shell) is the “client” for WinRM , which runs on the remote computer
attempting to remotely manage the WinRM server. However, I should note that BOTH
computers must have WinRM installed and enabled on them for WinRS to work and
retrieve information from the remote system.

113
Q

QUESTION: 113
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.A
network user named Rory Allen recently complained about receiving error messages
whilst using an application. Hotcerts.com is aware you do not have remote access to Rory
Allen’s computer. Hotcerts.com recently requested that you instruct Rory Allen how to
create screenshots of the actions performed on the computer whilst ensuring the mouse
actions performed are tracked to.What should you do?
A. You should consider instructing Rory Allen to select Display pointer trails from Mouse
Properties.
B. You should consider instructing Rory Allen to run the Snippingtool.exe command then
you should click New and select Windows Snip.
C. You should consider instructing Rory Allen to press ALT and PrintScreen.
D. You should consider instructing Rory Allen to run the Psr.exe command and click Start
Record.

A

Answer: D

D. You should consider instructing Rory Allen to run the Psr.exe command and click Start
Record.
Explanation:
The Problem Steps Recorder in the Windows 7 operating system is a feature that enables
users to record their interactions with an application and provide a detailed screen-byscreen
view with accompanying information. Learn how the recording can be used to
quickly identify problems and help reduce time spent with the help desk.

114
Q

QUESTION: 114
70-680
You are employed as the desktop support technician at Hotcerts.com. The Hotcerts.com
network consists of a single Active Directory domain named Hotcerts.com. You are
responsible for a workgroup name HC_GROUP that contains seven workstations. All the
workstations run Windows 7.The HC_GROUP contains workstation named HOTCERTSWS680
that host video and audio files. You want to share these files.What should you do?
(Each correct answer presents part on the solution. Choose TWO.)
A. You should consider moving the files to the Media Library on HOTCERTS-WS680.
B. You should consider enabling BitLocker To Go on HOTCERTS-WS680 and moving
the files to a removable drive.
C. You should consider enabling all BranchCache rules in Windows Firewall on
HOTCERTS- WS680.
D. You should consider creating a HomeGroup on HOTCERTS-WS680.

A

Answer: A,D

A. You should consider moving the files to the Media Library on HOTCERTS-WS680.

D. You should consider creating a HomeGroup on HOTCERTS-WS680.

115
Q

QUESTION: 115
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The network contains a
file server named HOTCERTS-SR03 that runs Windows Server 2008. HOTCERTS-SR03
contains a shared folder named HC_Data.You have been assigned a client computer
named HOTCERTS-WS680 that runs Windows 7. You receive an instruction to ensure
that HOTCERTS-WS680 is configured to encrypt any cached files from HC_Data. You
also need to ensure that when HOTCERTS-SR03 is disconnected the files in HC_Data are
still available.What should you do? (Each correct answer presents part on the solution.
Choose TWO.)
A. You should consider copying the files from HC_Data to the Documents library on
HOTCERTS-WS680.
B. You should consider encrypting the files in the HC_Data share on HOTCERTS-SR03.
C. You should consider enabling encryption of offline files on HOTCERTS-WS680.
D. You should consider enabling BitLocker Drive Encryption on HOTCERTS-WS680.
E. You should consider making HC_Data available offline on HOTCERTS-WS680.
F. You should consider enabling BitLocker Drive Encryption on HOTCERTS-SR03.

A

Answer: C,E

A. You should consider copying the files from HC_Data to the Documents library on
HOTCERTS-WS680.

E. You should consider making HC_Data available offline on HOTCERTS-WS680.

Explanation:
The two requirements are “to ensure that Hotcerts-ws680 is configured to encrypt any
cached files from HC_Data “ and that the files are available offline. E. Making the
HC_Data files available office on Hotcerts-ws680 is required and C. Enabling encryption
of the offline files. It is true that if the files on the server are encrypted, they will also be
encrypted in the workstation offline cache. But therequirement is “to ensure that
HOTCERTS-WS680is configured to cache any files from HC_Data .” Encrypting on the
70-680
server is also more work than configuring the workstation. Offline files can be set to be
encrypted via GPO or manually on the workstation.

116
Q

QUESTION: 116
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network contains a client computer named HOTCERTS-WS680 that is running Windows
7.You attach a printer named PRINTER01 to HOTCERTS-WS680 and install the printer
drivers. You then remove the Everyone group from the access control list (ACL) for the
PRINTER01 and share the printer. You need to ensure that member of a group named
HC_STAFF can only make changes to the print jobs that they submit. Members of the
HC_STAFF group must not be able to change the print jobs of other users.What should
you do?
A. You should consider assigning the Manage Documents permission to the HC_STAFF
group in the printer properties.
B. You should consider assigning the Take ownership of files or other objects user right to
the HC_STAFF group.
C. You should consider assigning the Increase scheduling priority user right to the
HC_STAFF group.
D. You should consider assigning the Print permission to the HC_STAFF group in the
printer properties.

A

Answer: D

D. You should consider assigning the Print permission to the HC_STAFF group in the
printer properties.

117
Q

QUESTION: 117
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.You install a new printer named PRINTER1on a
client computer named HOTCERTS-WS680. You share PRINTER1 with several users in
the Sales department. However, when members of the Sales department attempt to print to
PRINTER1, the output is unreadable. You need to ensure that members of the Sales
department can successfully print to PRINTER1.What should you do?
70-680
A. You should configure HOTCERTS-WS680 to print directly to the print device.
B. You should configure PRINTER1 to use the WinPrint print processor and to use RAW
as the default data type.
C. You should configure PRINTER1 to hold mismatched documents and disable the
advanced printing features.
D. You should run the ‘AddPrinter Driver Wizard’ to install the correct printer driver on
HOTCERTS-WS680.

A

Answer: D

D. You should run the ‘AddPrinter Driver Wizard’ to install the correct printer driver on
HOTCERTS-WS680.

Explanation:
Unreadable text usually indicates an incorrect printer driver. We need to install the correct
driver. The users will need to disconnect and reconnect to download the new driver.

118
Q

QUESTION: 118
You work as a network administrator at Hotcerts.com. Hotcerts.com has its headquarters
located in Miami and branch office located in Toronto. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 R2 and the client computers run Microsoft Windows 7.
A network user named Dean Austin uses a portable computer named HOTCERTS-WS01
which is joined to the domain in the Toronto office. Hotcerts.com has recently deployed a
file server named HOTCERTS-SR01 in the Miami office with a shared folder named
KingShares. During the course of the day you receive additional instruction from
Hotcerts.com to configure HOTCERTS-WS01 to meet the requirements set below:
HOTCERTS_WS01 should be configured to minimize network traffic between the Miami
and Toronto office ensuring that Dean Austin can only use HOTCERTS-WS01 to access
resources while connected to the network.What should you do?
A. You should consider having DirectAccess configured on HOTCERTS-SR01.
B. You should consider having KingShares configured to be available offline on
HOTCERTS- SR01
C. You should consider having offline files enabled on HOTCERTS-WS01.
D. You should consider having transparent caching enabled on HOTCERTS-WS01.

A

Answer: D

D. You should consider having transparent caching enabled on HOTCERTS-WS01.

119
Q

QUESTION: 119
70-680
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. Hotcerts.com currently
makes use of a stand-alone computer named HOTCERTS-WS680 that runs Microsoft
Windows 7.HOTCERTS-WS680 contains a single partition and is used by two
Hotcerts.com users named Rory Allen and Kara Lang.Rory Allen makes use of Encrypting
File System (EFS) to encrypt files. During the course of the day Rory Allen grants Kara
Lang access to the encrypted files. However, Kara Lang is unable to access the encrypted
files. You need to ensure that Kara Lang is able to access the encrypted files of Rory
Allen.What should you do?
A. You should consider having Rory Allen export his certificate to a certificate (.cer) file.
B. You should consider having Rory Allen move the file to a shared folder on
HOTCERTS- WS680.
C. You should consider having Kara Lang log on to HOTCERTS-WS680 and take
ownership of the file.
D. You should consider having Kara Lang log on to HOTCERTS-WS680 and encrypt a
file.

A

Answer: D

D. You should consider having Kara Lang log on to HOTCERTS-WS680 and encrypt a
file.

Explanation:
This is a standalone computer. When Kara logs on and encrypts a file, the system will
automatically generate an encryption certificate for her. The owner (Rory) of the
encrypted file will also need to add Lara’s certificate to the file.
To add the EFS certificate to the shared file
Right-click the file you want to share, and then click Properties.
Click the General tab, and then click Advanced.
In the Advanced Attributes dialog box, click Details.
In the dialog box that appears, click Add.
In the Select User dialog box, click the certificate, and then click OK.
You can also use the “chiper.exe” command from the command line. You would use the
adduser command along with the cert command.If Kara already has a certificate and you
want to use that certificate, you have to perform two additional steps:
1. Export Kara’s Certificate &
2. Import Kara’s certificate to Rory’s machine.

120
Q

QUESTION: 120
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.A Hotcerts.com user named Mia Hamm has
been assigned a client computer named HOTCERTS-WS680. Mia Hamm needs to share
an existing folder on HOTCERTS-WS680 with other members in her group. However,
Mia Hamm receives and “Access is denied” error whenever she tries to change the
permissions on the folder. You need to ensure that Mia Hamm can change the permissions
on the folder.What should you do?
A. You should add Mia Hamm to the Network Configuration Operators group.
B. You should add Mia Hamm to the Power Users group on HOTCERTS-WS680.
C. You should grant the ‘Allow-Modify’ permission on the folder to Mia Hamm.
D. You should grant the ‘Allow-Full control’ permission on the folder to Mia Hamm.

A

Answer: D

D. You should grant the ‘Allow-Full control’ permission on the folder to Mia Hamm.

Explanation:
To share a folder on her computer, Anna only needs full control on the folder. Therefore,
you need to Grant Allow-Full control permission to Anna in the properties of the folder.

121
Q

QUESTION: 121
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7. The user accounts in the Hotcerts.com network
is divided into four groups named ADMIN, SALES, MARKETING and OTHER.A
Hotcerts.com user named Mia Hamm has been assigned a client computer named
HOTCERTS-WS680. Mia Hamm is a member of the SALES group. Mia Hamm shares a
folder on HOTCERTS-WS680 named HotcertsFiles1. Mia Hamm wants members of the
MARKETING group to be able to add files to the HotcertsFiles1 shared folder. Currently
members of the SALES group have Allow - Read permission for the HotcertsFiles1 shared
folder while members of the MARKETING group have Allow - Modify permissions.You
need to ensure that members of both the SALES group and the MARKETING group can
add files to the HotcertsFiles1 shared folder.What should you do? (Each correct answer
presents part of the solution. Choose TWO.)
70-680
A. You should grant the EVERYONE group ‘Allow - Full Control’ permission on the
HotcertsFiles1 shared folder.
B. You should grant the MARKETING group ‘Allow - Read’ permission on the
HotcertsFiles1 shared folder.
C. You should grant the SALES group ‘Allow - Change’ permission on the HotcertsFiles1
shared folder.
D. You should grant the MARKETING group ‘Allow - Read’ permission on the
HotcertsFiles1 shared folder.
E. You should grant the SALES group ‘Allow - Modify’ permission on the HotcertsFiles1
shared folder.
F. You should grant the MARKETING group ‘Allow - Write’ permission on the
HotcertsFiles1 shared folder.

A

Answer: C,E

C. You should grant the SALES group ‘Allow - Change’ permission on the HotcertsFiles1
shared folder.

E. You should grant the SALES group ‘Allow - Modify’ permission on the HotcertsFiles1
shared folder.

Explanation:
In order for a group to be able to create files in a shared folder, the group must have the
NTFS permissions of “Allow - Modify” on the folder and the sharing permission of
“Allow - Change” on the share. Since the SALES group has neither, these two permissions
must be added.The Marketing group would also need to have “Change” permissions on the
share but this is not one of the possible answers.

122
Q

QUESTION: 122
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7. A
network user Rory Allen uses a shared computer containing a folder named KingShares.
Rory Allen is a member of the group named KingGroup. Rory Allen’s permission is
shown in the exhibit below:
70-680
The Group permission of the KingGroup members are shown in the exhibit below:
70-680
Hotcerts.com wants you to ensure that Rory Allen is able to create files in the KingShares
folder whist ensuring that all other members of KingGroup are stopped from creating files
in the KingShares folder.What should you do?
A. You should consider having the Read and Change share permission assigned to Rory
Allen on the KingShares folder.
B. You should consider having the Read and Change share permission assigned to
KingGroup on the KingShares folder.
C. You should consider having the Full control permission assigned to Rory Allen on the
KingShares folder.
70-680
D. You should consider having the Deny - Write permission removed for KingGroup on
the KingShares folder.

A

Answer: D

D. You should consider having the Deny - Write permission removed for KingGroup on
the KingShares folder.

123
Q

QUESTION: 123
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows
7.During the course of the day you attempt adding files to the %programfiles%\KingApps
and receive a prompt to elevate your privileges. Hotcerts.com wants you to ensure that you
are able to add files to %programfiles%\KingApps without receiving the prompts whilst
ensuring the solution prevents harmful application making unwanted changes to the
system.What should you do?
A. You should consider having your user account added to the local Power Users group.
B. You should consider having the permission of the %programfiles%\KingApps folder
modified.
C. You should consider having the built-in administrator account enabled.
D. You should consider having the User Account Control (UAC) settings modified.

A

Answer: B

B. You should consider having the permission of the %programfiles%\KingApps folder
modified.

124
Q

QUESTION: 124
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7. A
network user named Rory Allen a member of the group named KingAccess currently uses
a shared computer.Rory Allen recently informs you that the computer has a folder named
RAllen. Rory Allen requested that you configure the permissions on the RAllen folder to
meet the requirements below: The permission should be modified to allow Rory Allen to
delete all files in the RAllen folder.The permission should have the members of the
KingAccess group able to create files in the RAllen folder.Rory Allen has additionally
stated that you should configure the permissions to prevent the members of the
KingAccess group from deleting the files they did not create in the folder RAllen whilst
preventing all users from modifying the permission on RAllen.What should you do?
A. You should consider having Rory Allen assigned the Modify permission whilst having
the KingAccess group denied Write permission assigned.
B. You should consider having Rory Allen assigned the Write permission whilst having
the Modify permission denied to the KingAccess group.
C. You should consider having Rory Allen assigned the Modify permission whilst
assigning the Write permission to KingAccess group.
D. You should consider having Rory Allen assigned the Write permission whilst assigning
the Modify permission to the KingAccess group.

A

Answer: C

C. You should consider having Rory Allen assigned the Modify permission whilst
assigning the Write permission to KingAccess group.

125
Q

QUESTION: 125
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7. The
Hotcerts.com network users currently make use of a standalone computer for storing
encrypted files. Hotcerts.com recently requested that you ensure you are able to read the
content of the encrypted files of all users on the standalone computer.What should you do?
A. You should consider having the Cipher.exe /r command run and have a data recovery
agent added from the local security policy.
B. You should consider having the Cipher.exe /rekey command run and import a security
template from the local security policy.
C. You should consider having the Certificate Enrolment wizard run before running the
Certutil.exe “Cimportpfx command.
D. You should consider having the Certificate Enrolment wizard run before running the
Certutil.exe “Cinstallcert command run.

A

Answer: A

A. You should consider having the Cipher.exe /r command run and have a data recovery
agent added from the local security policy.

126
Q

QUESTION: 126
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.You currently make use of a workstation named
HOTCERTS-WS680. When installing new applications on HOTCERTS-WS680 you are
prompted for user account control permissions. You want to configure HOTCERTSWS680
to allow you to interact with the Desktop when prompted for user account control
permissions.What should you do?
A. You should consider setting the User Account Control: Switch to secure desktop when
prompting for credentials to Disabled.
B. You should consider setting the User Account Control: Run all administrators in Admin
Approval Mode to Enabled.
C. You should consider setting the User Account Control: Run all administrators in Admin
Approval Mode to Disabled.
D. You should consider setting the User Account Control: Switch to secure desktop when
prompting for credentials to Enabled.

A

Answer: A

A. You should consider setting the User Account Control: Switch to secure desktop when
prompting for credentials to Disabled.

127
Q

QUESTION: 127
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single workgroup named HOTCERTS. All client computers on HOTCERTS
workgroup run Windows 7.You need to allow Hotcerts.com users to install software on
their client computers without having access to any other administrative functions. You
also need to ensure that Hotcerts.com users are able to install software in the most secure
manner.What should you do?
A. You should make all Hotcerts.com users members of the local administrators group.
B. You should disable ‘User Account Control’ from the ‘User Accounts Control Panel’ tool.
C. You should configure ‘Parental Controls’ to prevent Hotcerts.com users from
downloading unapproved software.
D. You should configure the user account control to not prompt during software
installation from the Security Options section of the Local Security Policy.

A

Answer: D

D. You should configure the user account control to not prompt during software
installation from the Security Options section of the Local Security Policy.

Explanation:
You need to edit the Local Security Policy to not prompt during installs by disabling the
Detect application installations and prompt for elevation setting. This will allow
applications to be installed without prompting for the administrative credentials.

128
Q

QUESTION: 128
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.Hotcerts.com has a written security policy that
states that only administrator approved applications should be installed on the
Hotcerts.com network. A Hotcerts.com user named Amy Wilson has been assigned a
client computer named HOTCERTS-WS680. Amy Wilson reports that every time she
attempts to make configuration changes to HOTCERTS-WS680, she receives the prompt
shown in the following exhibit:
70-680
You need to ensure that Amy Wilson can make configuration changes to HOTCERTSWS680.
You verify that Amy Wilson is a member of the local administrators group. You
now want to prevent this prompt from appearing when Amy Wilson attempts to make
configuration changes to HOTCERTS-WS680.What should you do?
A. You should add Amy Wilson to the local Power Users group.
B. You should add Amy Wilson to the local Users group.
C. You should change ‘The behavior of the elevation prompt for administrators’ from ‘User
Account Control (UAC) Admin Approval Mode’.
D. You should turn off the Windows Firewall.
E. You should disable running all administrators in ‘User Account Control (UAC) Admin
Approval Mode’.

A

Answer: C

C. You should change 'The behavior of the elevation prompt for administrators' from 'User
 Account Control (UAC) Admin Approval Mode'.

Explanation:
UAC prevents unauthorized configuration changes and silent installations. The message
that is displayed confirms a user’s decision to make configuration changes. This helps
prevent viruses from making changes to a user’s computer in the security context of the
user but without the user’s permission. You should change the behavior of the elevation
prompt for administrators in UAC Admin Approval Mode. Change the policy setting
from Prompt for consent to No prompt. With this setting, the UAC message will not be
displayed whenever Amy Wilson attempts to make configuration changes that require
administrative privileges.

129
Q

QUESTION: 129
Hotcerts.com has hired you as a network Administrator for their network. A Hotcerts.com
user named Rory Allen is a senior manager in the Marketing department. You receive a
request from Rory Allen to ensure that his children are only able to login to Windows 7 at
certain times.What should you do?
70-680
A. Your best option would be to go to the Homegroup settings and select the Offline Time
Settings.
B. Your best option would be to go to Start then Control Panel.Thereafter User Profiles
should be selected and the Time Restriction Settings configured.
C. Your best option would be to prohibit the children from using the workstation when
you are at work.
D. Your best option would be to go to the Start then Control Panel.Then you should go to
User Accounts and Family Safety and select Setup Parental Controls. Thereafter Time
Restrictions can be set.

A

Answer: D

D. Your best option would be to go to the Start then Control Panel.Then you should go to
User Accounts and Family Safety and select Setup Parental Controls. Thereafter Time
Restrictions can be set.

130
Q

QUESTION: 130
You work as the network Administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All servers on the
Hotcerts.com network run Windows 7. Half the client computers run Windows Vista and
the rest Windows XP Professional. A Hotcerts.com employee named Kara Lang works in
the Research and Development department. She informs you that the security pop-up
notifications appear constantly on her monitor whilst she is working. You thus decide
implement a solution that will control when the notifications pop-up.What should you do?
A. You can accomplish this using the User Access Control Panel.
B. You can accomplish this using the Security Control Manager.
C. You can accomplish this using the Notification Control Settings Manager.
D. You can accomplish this using the User Account Control.

A

Answer: D

D. You can accomplish this using the User Account Control.

131
Q

QUESTION: 131
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network contains a Windows 7 computer named HOTCERTS-WS680 that runs a finance
application named finapp.exe. You use RunAs with the /savecred parameter to start
finapp.exe. You now want to delete the stored passwords.What should you do?
A. You should consider changing the Authorization Manager options from Authorization
Manager.
B. You should consider changing the Windows credentials from Credential Manager.
C. You should consider running the RunAs and specify the /noprofile parameter.
70-680
D. You should consider running the Del and specify the /p parameter.

A

Answer: B

B. You should consider changing the Windows credentials from Credential Manager.

132
Q

QUESTION: 132
You are the newly appointed network Administrator at Hotcerts.com. The Hotcerts.com
network consists of a single Active Directory domain named Hotcerts.com. The
Hotcerts.com network contains a VPN server named HOTCERTS-SR01 that is configured
to run Windows Server 2008. You are responsible for a computer named HOTCERTSWS10
that is configured to run Windows 7. During the course of the day you receive an
instruction from the CIO to make use of a smart card in order to authenticate HOTCERTSSR01.
What should you do?
A. Your best option would be to make use of PAP.
B. Your best option would be to make use of PMS-CHAP v2.
C. Your best option would be to make use of P EAP.
D. Your best option would be to make use of PCHAP.

A

Answer: C

C. Your best option would be to make use of P EAP.

133
Q

QUESTION: 133
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 R2 and the client computers run Microsoft Windows
7.Hotcerts.com has recently deployed a server named HOTCERTS-SR01 configured as a
DHCP server that has Network Access Protection (NAP) enforcement point configured.
During the course of the day you receive instruction from Hotcerts.com to configure a
network user named Rory Allen’s client computer as a NAP client.What should you do?
(Choose two)
A. You should consider having the Network Access Protection Agent service Startup Type
set to Automatic from the services snap-in.
B. You should consider having the user interface settings configured from the NAP Client
Configuration console.
C. You should consider having the DHCP Quarantine Enforcement Client enabled from
the NAP Client Configuration console.
D. You should consider having the Netlogon service Startup Type set to Automatic from
the services snap-in.

A

Answer: A,C

A. You should consider having the Network Access Protection Agent service Startup Type
set to Automatic from the services snap-in.

C. You should consider having the DHCP Quarantine Enforcement Client enabled from
the NAP Client Configuration console.

134
Q

QUESTION: 134
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.
Hotcerts.com has recently installed and configured a file server named HOTCERTS-SR01
to the network.A network user named Rory Allen makes use of a computer named
HOTCERTS-WS01 and tried logging on to HOTCERTS-SR01 using an account named
RAllen unsuccessfully. Hotcerts.com wants you to ensure that Rory Allen authenticates
using the account named KingAdmin when connecting to HOTCERTS-SR01.What should
you do?
A. You should consider having the Add a Windows credential from Credential Manager
selected on HOTCERTS-WS01.
B. You should consider having the Access this computer from the network user right
modified from Local Security Policy on HOTCERTS-WS01.
C. You should consider having the Link online IDs from User Accounts selected on
HOTCERTS- WS01.
D. You should consider having the Add a card selected from Windows CardSpace selected
on HOTCERTS-WS01.

A

Answer: A

A. You should consider having the Add a Windows credential from Credential Manager
selected on HOTCERTS-WS01.

135
Q

QUESTION: 135
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. Hotcerts.com has its
headquarters in London and a branch office in Paris. All servers on the Hotcerts.com
network run Windows Server 2008 R2 and all client computers run Windows 7. The
London office contains a file server named HOTCERTS-SR04 that hosts shared folders
that are accessed from both offices. The Paris office contains a DNS server named
HOTCERTS-SR12.You want to reduce network traffic between the Paris office and the
London office. You decide to enable BranchCache in Hosted Cache mode on
HOTCERTS-SR12. You now need to enable BranchCache on the client computers.What
should you do?

A

Explanation:
Step #1
Click START and select Computer Management
70-680
Step #2
Click on ‘Services and Applications’ and select ‘Services’.
70-680
Step #3
Locate the ‘ BranchCache ‘ service, start the service and set it to start automatically.

136
Q

QUESTION: 136
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. Hotcerts.com has its
headquarters in London and a branch office in Paris. All servers on the Hotcerts.com
network run Windows Server 2008 and all client computers run Windows 7.The London
office contains a file server named HOTCERTS-SR04 that hosts shared folders that are
accessed from both offices. The Paris office also contains a file server named
HOTCERTS- SR12 that is only accessed from the Paris office. You want to reduce
network traffic between the Paris office and the London office.What should you do?
70-680
A. You should enable BranchCache in Host mode on HOTCERTS-SR04 in the London
Office.
B. You should enable BranchCache in Host mode on HOTCERTS-SR12 in the Paris
Office.
C. You should enable BranchCache in Distributed mode on the client computers in the
London Office.
D. You should enable BranchCache in Distributed mode on the client computers in the
Paris Office.
E. You should configure a Virtual Private Network (VPN) connection between
HOTCERTS-SR12 and HOTCERTS-SR04.

A

Answer: D

D. You should enable BranchCache in Distributed mode on the client computers in the
Paris Office.

Explanation:
BranchCache in Distributed mode on the client computers in the Paris Office will cache
files from HOTCERTS-SR04 on the local computers and will reduce network traffic
between the two offices.

137
Q

QUESTION: 137
You work as the network Administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. Hotcerts.com has its
headquarters in London and branch office in Athens. All servers on the Hotcerts.com
network run Windows Server 2008 and all client computers run Windows 7.The servers
are located at the London office and the four client computers at the Athens office. The
servers located at London office have BranchCache enabled. You receive numerous
complaints from users at the Athens office stating that it takes a long time to open big files
in the London office. You receive an instruction from the CIO to minimize the time it
takes for users in the Athens office to open files in the London office. You are also
instructed to minimize the total bandwidth used between the London and Athens
offices.What should you do?
70-680
A. Your best option would be to configure the client computers to make use of the
BranchCache Hosted Cache mode at the Athens office.
B. Your best option would be to configure the client computers to make use of the
BranchCache Distributed Cache mode at the Athens office.
C. Your best option would be to configure the servers to use Background Intelligent
Transfer Service (BITS) at the London office.
D. Your best option would be to configure the Quality of Service (QoS) Packet Scheduler
on all servers at the London office.

A

Answer: B

B. Your best option would be to configure the client computers to make use of the
BranchCache Distributed Cache mode at the Athens office.

138
Q

QUESTION: 138
You work as a network administrator at Hotcerts.com. Hotcerts.com currently has its
headquarters located in Miami and branch office located in Detroit. The Hotcerts.com
network consists of a single Active Directory domain named Hotcerts.com. The servers on
the network run Microsoft Windows Server 2008 and the client computers run Microsoft
Windows 7.Hotcerts.com has the Detroit office configured to use BranchCache. During
the course of the day a network user in the Detroit office using a computer named
HOTCERTS-WS01 complains from experiencing performance issues. Hotcerts.com wants
you to temporarily have all the computers prevented from retrieving cached content from
HOTCERTS-WS01.What should you do?
A. You should consider having the Configure BranchCache for network files Group Policy
setting modified.
B. You should consider having the Set percentage of disk space used for client computer
cache Group Policy setting modified.
C. You should consider having the Netsh branchcache flush command run at the command
prompt of HOTCERTS-WS01.
D. You should consider having the Netsh branchcache dump command run at the
command prompt of HOTCERTS-WS01.

A

Answer: C

C. You should consider having the Netsh branchcache flush command run at the command
prompt of HOTCERTS-WS01.

139
Q

QUESTION: 139
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You are responsible for
two workstations named HOTCERTS-WS680 and HOTCERTS-WS682. Both
HOTCERTS- WS680 and HOTCERTS-WS682 run Windows 7 and are members of the
Hotcerts.com domain.You are able to recover the Encryption File System (EFS) encrypted
files for all domain users from HOTCERTS-WS680. HOTCERTS-WS680 is scheduled
for routine maintenance. While HOTCERTS-WS680 you need to be sure that you can use
HOTCERTS-WS682 to recover the Encryption File System (EFS) encrypted files for all
domain users.What should you do?
70-680
A. You should consider backing up %systemroot%\DigitalLocker on HOTCERTS-WS680
and restoring it on HOTCERTS-WS682.
B. You should consider running Secedit.exe with the /export parameter on HOTCERTSWS680.
Then you should consider running Secedit.exe with the /import parameter on
HOTCERTS- WS682.
C. You should consider running Cipher.exe with the /removeuser parameter on
HOTCERTS- WS680. Then you should consider running Cipher.exe with the /adduser
parameter on HOTCERTS-WS682.
D. You should consider exporting the data recovery agent certificate on HOTCERTSWS680
and importing it on HOTCERTS-WS682.

A
140
Q

QUESTION: 140
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Windows 7.You have received instructions to ensure that no
Hotcerts.com user can copy unencrypted files to removable drives.What should you do?
A. You should consider changing the BitLocker Drive Encryption settings from the local
Group Policy.
B. You should consider initializing the TPM from the Trusted Platform Module (TPM)
snap-in.
C. You should consider changing the Trusted Platform Module (TPM) settings in the local
Group Policy.
D. You should consider changing the BitLocker Drive Encryption settings from the
Control Panel.

A

Answer: A

A. You should consider changing the BitLocker Drive Encryption settings from the local
Group Policy.

141
Q

QUESTION: 141
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.The Research and Development department is
working on a confidential project. To protect their computers from data theft they
encrypted the hard disk of their client computers with BitLocker. The USB drive is used to
store the BitLocker password. All the computers that were encrypted were using Trusted
Platform Model (TPM) chip on their motherboards.A member of the Research and
Development department named Amy Wilson has been assigned a client computer named
HOTCERTS-WS680. Amy Wilson reports that she was not able to start HOTCERTSWS680
because the TPM chip on HOTCERTS-WS680 was faulty. You need to recover
the encrypted data from HOTCERTS-WS680.What should you do?
A. You should replace the motherboard on HOTCERTS-WS680 with the same brand of
motherboard having the same brand of TPM chip.
B. You should update the BIOS on HOTCERTS-WS680.
C. You should enter the BitLocker Drive Encryption Recovery console on HOTCERTSWS680
by using the password stored on the USB drive and recover the data.
D. You should run WinRE on HOTCERTS-WS680 and recover the data.

A

Answer: C

C. You should enter the BitLocker Drive Encryption Recovery console on HOTCERTSWS680
by using the password stored on the USB drive and recover the data.

Explanation:
When the BitLocker is used in TPM only mode, it uses TPM hardware to validate the
integrity of the computer and the Operating System. If the TPM is missing or changed,
then to recover data, you need to enter the BitLocker Drive Encryption Recovery console
on the computer by using the 40 digit recovery key or password stored on the USB drive
to recover the data.

142
Q

QUESTION: 142
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com as well as a Direct
Access infrastructure. Hotcerts.com has purchased a new mobile computer named
HOTCERTS-WS680. You install Windows 7 on HOTCERTS-WS680 and join it to the
domain. You now need to make sure that HOTCERTS-WS680 is able to establish Direct
Access connections.What should you do?
A. You should consider installing a computer certificate on HOTCERTS-WS680.
B. You should consider enabling the Network Discovery firewall exception on
HOTCERTS- WS680.
C. You should consider creating a new network connection on HOTCERTS-WS680.
D. You should consider adding the computer account for HOTCERTS-WS680 to the
Network Configuration Operators group.

A

Answer: A

A. You should consider installing a computer certificate on HOTCERTS-WS680.

143
Q

QUESTION: 143
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. There are both desktop
and laptop workstations in operation at Hotcerts.com.You are assigned a workstation
named HOTCERTS-WS680 that runs Windows 7. You run Ipconfig on HOTCERTSWS680
and receive the output as shown in the following exhibit:
70-680
You want to establish a DirectAccess connection to the network.What should you do?
A. You should first consider configuring a static IPv4 address on HOTCERTS-WS680.
B. You should first consider enabling IPv6 on HOTCERTS-WS680.
C. You should first consider adding the DNS server address on HOTCERTS-WS680.
D. You should first consider creating a new VPN connection on HOTCERTS-WS680.

A

Answer: B

B. You should first consider enabling IPv6 on HOTCERTS-WS680.

144
Q

QUESTION: 144
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You are assigned a
mobile computer named HOTCERTS-WS680 that runs Windows 7.You are currently
using Windows Internet Explorer 8 to browse a Web site that displays Really Simple
Syndication (RSS) feeds. You want to be able to view the headlines of the site when
HOTCERTS-WS680 is offline.What should you do?
A. You should add the home page of the site to the favorites list from Internet Explorer 8.
B. You should open the Offline Files from the Control Panel and select the ‘Enable Offline
Files’.
C. You should synchronize the information from the Sync Center prior to disconnecting
from the Internet.
D. You should add the RSS page of the site to the feeds list from Internet Explorer 8.

A

Answer: D

D. You should add the RSS page of the site to the feeds list from Internet Explorer 8.

145
Q

QUESTION: 145
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7. The Hotcerts.com network contains a file server
named HOTCERTS-SR24 that hosts a shared folder named HCDocs.A Hotcerts.com user
Amy Walsh has been assigned a mobile computer named HOTCERTS- WS680. Amy
Walsh uses HOTCERTS-WS680 to work on a file named MarketingPlan.doc, which is
located in a folder named HCDocs folder on HOTCERTS-SR04.Amy Walsh needs to
make the MarketingPlan.doc file available on HOTCERTS-WS680 so that she can
continue working on the document when she is out of the office. You verify that Amy
Walsh has permission to make the file available offline. However, when Amy Walsh rightclicks
the file, the menu option labeled Make available offline is not visible. You need to
ensure that Anne can make the file available offline.What should you do?
A. You should instruct Amy Walsh to map a network drive to the \Hotcerts-sr24\HCdocs
folder.
B. You should instruct Amy Walsh to move the MarketingPlan.doc file from the
\Hotcerts- sr24\HCdocs folder to a shared folder on HOTCERTS-WS680.
C. You should ask a network administrator to modify the permissions on the
MarketingPlan.doc file to grant Amy Walsh Allow-Read & Execute permission.
D. You should ask a network administrator to open the properties of the HCDocs shared
folder and ensure that the Allow caching of files in this shared folder check box is
selected.

A

Answer: D

D. You should ask a network administrator to open the properties of the HCDocs shared
folder and ensure that the Allow caching of files in this shared folder check box is
selected.

Explanation:
Enabling offline files is a two step process. First, it must be enabled on the shared files by
allowing the caching of the files. Only when this is done will Anne be able to make the
files available to her offline.

146
Q

QUESTION: 146
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7. All Hotcerts.com users store their data on a file
server named HOTCERTS-SR04. No company or user data is stored locally on client
computers.Hotcerts.com users from the Sales department have been issued with portable
computers. When these users travel, they must be able to use company data files even
when they are not connected to the network. You enable caching of offline files on all
shared folders on HOTCERTS-SR04. You also configure offline files on all portable
computers in the Sales department. Before they leave the office users in the Sales
department users select several folders from HOTCERTS- SR04 to be made available
offline.However, when the users return to the office they report that the offline files are no
available to them when they were out of the office. You need to ensure that the offline
70-680
files are available to the Hotcerts.com users in the Sales department even when they are
not connected to the network.What should you do?
A. You should grant the ‘Allow-Full Control’ permission on the shared folders on
HOTCERTS- SR04 to the users in the Sales department.
B. You should change the caching options for the shared folders on HOTCERTS-SR04 to
allow automatic caching of documents.
C. You should add HOTCERTS-SR04 to the Exception list on the offline files
configuration of each portable computer in the Sales department.
D. You should select the ‘Notify me and begin working offline’ check box from the
Advanced properties for Offline Files on each portable computer in the Sales department.

A

Answer: D

D. You should select the ‘Notify me and begin working offline’ check box from the
Advanced properties for Offline Files on each portable computer in the Sales department.

Explanation:
The portable clients must be configured to begin to work offline when they are
disconnected from the network. To configure this we must open Control Panel on the
client computers and then o pen Folder Options. On the Offline Files tab, click Advanced
and under When a network connection is lost, select Notify me and begin working offline.
This is the preferred option for portable notebook systems and it specifies that you can
continue working offline if you lose your connection to a computer or the network. Any
network files will continue to be available to you.

147
Q

QUESTION: 147
You are the newly appointed desktop support technician at Hotcerts.com. The
Hotcerts.com network consists of a single Active Directory domain named
Hotcerts.com.You are responsible for managing a workstation named HOTCERTSWS680
that is configured to run Windows 7. Several Hotcerts.com users log onto
HOTCERTS-WS680. HOTCERTS- WS680 contains a folder named HC_Data. You
enable auditing on HC_Data. You need to ensure all access to HC_Data is logged.What
should you do?
A. You should consider starting the Problem Steps Recorder.
B. You should consider configuring the Audit object access setting from the local Group
Policy.
C. You should consider configuring the Audit directory service Access setting from the
local Group Policy.
D. You should consider modifying the properties of the Security log from the Event
Viewer.

A

Answer: B

B. You should consider configuring the Audit object access setting from the local Group
Policy.

148
Q

QUESTION: 148
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network contains two computers named HOTCERTS-WS680 and HOTCERTS-WS622.
HOTCERTS-WS680 currently runs Microsoft Windows 7 and HOTCERTS-WS622 runs
Microsoft Windows XP Professional.During the course of the day you enable remote
desktop on HOTCERTS-WS680 as shown in the exhibit below:
Later, a Hotcerts.com user named Rory Allen logs on to HOTCERTS-WS622 and
attempts to remotely access HOTCERTS-WS680. However, Rory Allen receives the error
as shown in the exhibit below:
You need to ensure that Rory Allen can use HOTCERTS-WS622 to remotely connect to
HOTCERTS-WS680.What should you do?
A. You should consider adding Rory Allen’s user account to the Remote Desktop Users
group on HOTCERTS-WS680.
B. You should consider creating a firewall exception for the Remote Desktop Protocol
(RDP) protocol and assigned to HOTCERTS-WS622.
C. You should consider enabling the Allow connections from computers running any
version of Remote Desktop setting on HOTCERTS-WS680.
D. You should consider assigning the Client (Respond Only) IPSec policy to
HOTCERTS- WS622.
70-680

A

Answer: C

C. You should consider enabling the Allow connections from computers running any
version of Remote Desktop setting on HOTCERTS-WS680.

149
Q

QUESTION: 149
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You are working on a
computer named HOTCERTS-WS680 that runs Microsoft Windows 7. During the course
of the day you created a VPN connection on HOTCERTS-WS680 for connecting to the
Hotcerts.com network. You want to ensure that you are still able to use the Internet while
being connected to the Hotcerts.com network via the VPN connection. You also want to
ensure that Internet traffic is not routed through the Hotcerts.com network.What should
you do?
A. You should consider assigning a static IP address and default gateway on HOTCERTSWS680.
B. You should consider configuring the security settings of the VPN connection on
HOTCERTS- WS680.
C. You should consider configuring the advanced TCP/IP settings of the VPN connection
on HOTCERTS-WS680.
D. You should consider configuring a static DNS server address on HOTCERTS-WS680.

A

Answer: C

C. You should consider configuring the advanced TCP/IP settings of the VPN connection
on HOTCERTS-WS680.

150
Q

QUESTION: 150
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.A Hotcerts.com user named Kara Lang has been
assigned a portable client computer named HOTCERTS-WS680. Kara Lang is aware that
HOTCERTS-WS680 has a Virtual Private Network (VPN) connection configured to
connect to the Hotcerts.com network from remote locations. However, Kara Lang reports
that she cannot locate the VPN connection on HOTCERTS-WS680.What should you do?
A. You should inform Kara Lang to check in Ease of Access.
B. You should inform Kara Lang to check in System and Maintenance.
C. You should inform Kara Lang to check in Network and Sharing Center.
D. You should inform Kara Lang to check in Mobile PC.

A

Answer: C

C. You should inform Kara Lang to check in Network and Sharing Center.

Explanation:
The Network and Sharing Center program is where you would go to view all your
network connections including VPN connections. From within the Network and Sharing
Center program, you can select the VPN connection and connect to it.

151
Q

QUESTION: 151
You are the newly employed desktop support technician at Hotcerts.com. The
Hotcerts.com network consists of a single Active Directory domain named
Hotcerts.com.You are assigned a workstation named HOTCERTS-WS680. HOTCERTSWS680
is configured to run Windows 7. You need to determine the applications that were
installed by another desktop support technician the previous week.What should you do?
A. You should consider reviewing the Software Environment from System Information.
B. You should consider running the System Performance Data Collector Set from
Performance Monitor.
C. You should consider reviewing the System Diagnostics Report from Performance
Monitor.
D. You should consider reviewing the informational events from Reliability Monitor.

A

Answer: D

D. You should consider reviewing the informational events from Reliability Monitor.

Explanation:
Use Reliability Monitor to Troubleshoot
Reliability Monitor shows you your system stability history at a glance and lets you see
details on a day-by-day basis about events that impact reliability. This topic helps you
understand the results and take steps to improve reliability based on what you learn.
System Stability Chart
Reliability Monitor maintains up to a year of history for system stability and reliability
events. The System Stability Chart displays a rolling graph organized by date.
The top half of the System Stability Chart displays a graph of the Stability Index. In the
lower half of the chart, five rows track Reliability Events that either contribute to the
stability measurement for the system or provide related information about software
installation and removal. When one or more Reliability Events of each type are detected,
an icon appears in the column for that date.For Software Installs and Uninstalls, an
Information icon indicates a successful event of that type occurred, or a Warning icon
indicates a failure of that type occurred.For all other Reliability Event types, an Error icon
indicates a failure of that type occurred.

152
Q

QUESTION: 152
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You working on a
Windows 7 workstation named HOTCERTS-WS680. You have received instruction to
configure Windows Update on HOTCERTS-WS680. You open Windows Update as
shown in the following exhibit:
70-680
You need to ensure that the Windows Update settings on HOTCERTS-WS680 can be
changed manually.What should you do?
A. You should consider changing the Windows Update settings from the local Group
Policy on HOTCERTS-WS680.
B. You should consider right-clicking Windows Update and choosing Run as
administrator on HOTCERTS-WS680.
C. You should consider right-clicking the command prompt and choosing Run as
administrator to run Wuapp.exe on HOTCERTS-WS680.
D. You should consider logging on to HOTCERTS-WS680 as member of the
Administrators group.

A

Answer: A

A. You should consider changing the Windows Update settings from the local Group
Policy on HOTCERTS-WS680.

153
Q

QUESTION: 153
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You working on a
workstation named HOTCERTS-WS680 that runs Microsoft Windows 7. You have
received instruction to have HOTCERTS-WS680 configured to download updates from a
local Windows Server Update Services (WSUS) server.What should you do?
70-680
A. You should consider changing the Windows Update settings from Windows Update on
HOTCERTS-WS680.
B. You should consider changing the Windows Update settings from the local Group
Policy on HOTCERTS-WS680.
C. You should consider changing the System Protection settings from the System settings
on HOTCERTS-WS680.
D. You should consider changing the Location and Sensors settings from the local Group
Policy on HOTCERTS-WS680

A

Answer: B

B. You should consider changing the Windows Update settings from the local Group
Policy on HOTCERTS-WS680.

154
Q

QUESTION: 154
You are employed as a network administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Microsoft Windows 7. All client computers are configured
for automatic updates.The Hotcerts.com network contains a client computer named
HOTCERTS-WS680. After a recent update you notice that some of the applications on
HOTCERTS-WS680 do not work. You reboot HOTCERTS-WS680 but the applications
still do not work. You need to remove the latest update.What should you do?
A. You should use Add or Remove Programs from the Control Panel.
B. You should restore hidden updates.
C. You should use Software Explorer.
D. You should use the Installed updates list from Windows Update.

A

Answer: D

D. You should use the Installed updates list from Windows Update.

Explanation:
To uninstall a Windows Update, you can use the Installed updates list on the Windows
Update window. When you display the list of updates, you’ll see an ‘Uninstall’ button in
the toolbar. Simply select the update you wish to uninstall, then click the Uninstall button.

155
Q

QUESTION: 155
You are employed as a desktop technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You are working on a
client computer named HOTCERTS-WS680 that runs Windows 7. You want to determine
70-680
whether recent Windows Updates have been applied to HOTCERTS-WS680.What should
you do? (Each correct answer presents a complete solution. Choose TWO.)
A. You should check the Security event log.
B. You should check ReportingEvents.log file.
C. You should check the update history in the Windows Update applet.
D. You should check the Setup event log.

A

Answer: B,C

B. You should check ReportingEvents.log file.
C. You should check the update history in the Windows Update applet.

Explanation:
To find out whether the updates have been installed on your computer or not, you need to
Check ReportingEvents.log file because the WSUS client records update activities and
results in this file. You need to check the update history in the Windows Update applet to
see which updates Windows has installed, click the View Update History link in the left
panel in the Windows Update window to view the updates.

156
Q

QUESTION: 156
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You are working on a
client computer named HOTCERTS-WS680 that runs Windows 7. HOTCERTS-WS680
has a Wake-on-LAN compliant network card. You configure Windows Update to run at
night when the computer is shut down. You enable the Wake-on-LAN feature and
configured the Enabling Windows Update Power Management settings on HOTCERTSWS680.
You need to ensure that Windows Update occurs at night.What should you do?
A. You should leave HOTCERTS-WS680 in hibernate mode at night.
B. You should leave HOTCERTS-WS680 in sleep mode at night.
C. You should shutdown HOTCERTS-WS680 at night.
D. You should leave HOTCERTS-WS680 switched on at night.

A

Answer: A

A. You should leave HOTCERTS-WS680 in hibernate mode at night.

Explanation:
To perform Windows Update installations to run at night, when computers are shut down,
you need to Leave computers in hibernate mode at night. The computers in hibernate
mode saves the contents of memory to a file called hiberfil.sys, thus you would not lose
unsaved data in case of total power failure and thus can download the Windows updates
and perform installations.

157
Q

QUESTION: 157
You work as the network Administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network client computers currently make use of Microsoft Windows XP Professional.
Hotcerts.com has recently decided to have the client computers upgraded to Microsoft
70-680
Windows 7 with all the installed applications. During the course of the day you receive an
instruction from the CIO to install Federated Search connectors.What should you do?
A. This can be accomplished by downloading the Shared Resource Kit for Federated
Searches via Amazon.com.
B. This can be accomplished having the Federated Search Installation Tool Pack bought
online. Thereafter individual search connectors bought from various websites.
C. This can be accomplished by having an .osdx file downloaded from a valid source.
Thereafter the downloaded file should be double clicked and Add selected in order to
install the file.
D. This can be accomplished by going to the website of Microsoft if your company is
signed up to the Microsoft Federated Search Tool Writers Guild.

A

Answer: C

C. This can be accomplished by having an .osdx file downloaded from a valid source.
Thereafter the downloaded file should be double clicked and Add selected in order to
install the file.

158
Q

QUESTION: 158
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You are assigned a
workstation named HOTCERTS-WS680. HOTCERTS-WS680 is configured to run
Windows 7. You open the Disk Management snap-in on HOTCERTS-WS680 as shown in
the following exhibit:
You want to create a new partition on Disk 0.What should you do?
70-680
A. You should consider compressing volume C
B. You should consider converting Disk 0 into a dynamic disk.
C. You should consider creating as well as initializing a Virtual Hard Disk (VHD).
D. You should consider shrinking volume C.

A

Answer: D

D. You should consider shrinking volume C.

159
Q

QUESTION: 159
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Microsoft Windows 7.Hotcerts.com issues a new usage
policy that prevents Hotcerts.com users from installing removable disk devices on their
computers. You need to ensure that the policy is implemented.What should you do?
A. You should enable the ‘WPD Devices: Deny Read Access’ group policy setting.
B. You should enable the ‘Removable Disk: Deny Read Access’ group policy setting.
C. You should enable the ‘Allow installation of devices that match any of these device IDs’
group policy setting.
D. You should enable the ‘Prevent installation of removable devices’ group policy setting.

A

Answer: D

D. You should enable the ‘Prevent installation of removable devices’ group policy setting.

Explanation:
To prevent users from installing removable device drivers on their computers, you need to
enable group policy setting Prevent installation of removable devices Device Installation
Restriction.

160
Q

QUESTION: 160
You work as the network Administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You are responsible for
managing a computer named HOTCERTS-SR05 that is configured to run Windows 7.
HOTCERTS-SR05 is configured to host two volumes named C and D. You are in the
process of creating a new folder named D:\TESTDATA. During the course of the day you
receive notification from management to make sure that files stored in TESTDATA are
indexed by Windows search.What should you do?
A. You should consider changing the Folder Options from the Control Panel.
B. You should consider enabling the archive attribute on the folder.
C. You should consider creating a new library and adding TESTDATA to it.
D. You should consider changing the properties of the Windows Search service.

A

Answer: C

C. You should consider creating a new library and adding TESTDATA to it.

161
Q

QUESTION: 161
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.
Hotcerts.com recently deployed a new workstation named HOTCERTS-WS01 to the
network. The Disk configuration of HOTCERTS-WS01 is shown in the exhibit below:
During the course of the day you receive instruction from Hotcerts.com to extend the C:
volume on HOTCERTS-WS01 by selecting what to do first.What should you do?
A. You should consider the crash dump removed from volume C:
B. You should consider having the paging file moved from volume C: to volume E:
C. You should consider having volume D: backed up and deleted.
D. You should consider having disk 0 converted to a dynamic disk.

A

Answer: C

C. You should consider having volume D: backed up and deleted.

162
Q

QUESTION: 162
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7. You are working on a client computer named
HOTCERTS-WS680. You want to identify the hardware and software failures which have
occurred on HOTCERTS-WS680 over the past six months. What should you do?
70-680
A. You should review the results from the System Performance Data Collector Set.
B. You should create a User Defined Data Collector Set and review the results.
C. You should review the results from the System Stability Chart.
D. You should create an Event Trace Sessions Data Collector Set and review the results.

A

Answer: C

C. You should review the results from the System Stability Chart.

163
Q

QUESTION: 163
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. Several months ago
Hotcerts.com had deployed Microsoft Windows 7 client computers for all users in the
Sales department.You received a report from a Hotcerts.com user in the Sales Department
user named Rory Allen. Rory Allen has been assigned a client computer named
HOTCERTS-WS680 and reports that he experiences an unusually large amount of system
failures. You log on to HOTCERTS-WS680 in an attempt to identify the cause of the
failures and also to analyze a historical view of workstation performance and see when the
failures first started appearing on HOTCERTS-WS680.What should you do?
A. You should make use of Performance Monitor.
B. You should make use of the Reliability Monitor.
C. You should make use of a System Diagnostics Data Collector Set.
D. You should make use of the Resource Overview tool.

A

Answer: B

B. You should make use of the Reliability Monitor.

Explanation:
The Reliability Monitor will allow you to see a graphical history of software installs and
uninstalls, application failures, hardware failures, Windows failures, and miscellaneous
failures.

164
Q

QUESTION: 164
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You have been
assigned a workstation named HOTCERTS-WS680 that is configured to run Windows
7.You want to compile the performance data for a period of three weeks on HOTCERTSWS680.
The performance data should encompass CPU usage, memory usage as well as
disk usage.What should you do?
A. You should create an Event Trace Sessions Data Collector Set.
B. You should create a Startup Event Trace Sessions Data Collector Set.
C. You should create a User Defined Data Collector Set.
D. You should add counters to the Performance Monitor.

A

Answer: C

C. You should create a User Defined Data Collector Set.

165
Q

QUESTION: 165
You are employed as the network Administrator at Hotcerts.com. The Hotcerts.com
network consists of a single Active Directory domain named Hotcerts.com. You are
responsible for managing a computer named HOTCERTS-WS25 that is configured to run
Windows 7. During the course of the day you receive an instruction from the CIO to view
the processes that produce network activity at present.What should you do?
A. You should consider opening Windows Task Manager and clicking the Networking
tab.
B. You should consider opening Resource Monitor and clicking the Network tab.
C. You should consider opening Performance Monitor and adding all counters for the
network interface.
D. You should consider opening Event Viewer and examining the NetworkProfile
Operational log.

A

Answer: B

B. You should consider opening Resource Monitor and clicking the Network tab.

166
Q

QUESTION: 166
Hotcerts.com has employed you as a network Administrator. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All servers on the
Hotcerts.com network run Windows Server 2008 and all mobile computers run Windows
7. You are assigned a mobile computer named HOTCERTS-WS20.HOTCERTS-WS20 is
configured to enter sleep mode if no activity takes place in 15 minutes.You leave your
office for 20 minutes and discover that HOTCERTS-WS20 has not entered into sleep
mode. You are puzzled by the fact that HOTCERTS-WS20 has not entered into sleep
mode and thus decide to identify what could have caused this from happening.What
should you do?
A. You should consider reviewing the detailed performance and system information from
Performance Information and Tools.
B. You should consider running Powercfg energy at a command prompt.
C. You should consider running Systeminfo /s localhost at a command prompt.
D. You should consider reviewing the System Summary from Performance Monitor.

A

Answer: B

B. You should consider running Powercfg energy at a command prompt.

167
Q

QUESTION: 167
You are employed as the network Administrator at Hotcerts.com. The Hotcerts.com
network client computers currently make use of Microsoft Windows XP Professional.
Hotcerts.com has recently decided to have the client computers upgraded to Microsoft
Windows 7. You receive a complaint from a Hotcerts.com user named Mia Hamm stating
that the gamed included with Windows 7 were not installed by default on her computer.
You thus decide to install the games on her computer.What should you do?
A. You are able to add or remove components in Windows 7 by right clicking the “My
Computer” icon and selecting Choose Properties.Then Computer Management should be
selected.Thereafter Add Remove Windows Components should be selected from left pane.
B. You are able to add or remove components in Windows 7 by clicking the Start Bar and
selecting Control Panel.Thereafter Add/Remove Programs should be selected and
Windows Components clicked.
C. You are able to add or remove components in Windows 7 by clicking the Start Bar and
selecting Control Panel.Thereafter Programs should be selected and the Turn Windows
features should be clicked on or off.
D. You are able to add or remove components in Windows 7 by clicking the Start Bar.
Then Settings should be selected.Thereafter you should select Windows Control Center.

A

Answer: C

C. You are able to add or remove components in Windows 7 by clicking the Start Bar and
selecting Control Panel.Thereafter Programs should be selected and the Turn Windows
features should be clicked on or off.

168
Q

QUESTION: 168
Hotcerts.com has employed you as a network Administrator. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network client computers currently make use of Microsoft Windows XP Professional.
Hotcerts.com has recently decided to have the client computers upgraded to Microsoft
Windows 7 with all the installed applications. You are in the process of notifying all
Hotcerts.com users how they will be made aware with information systems and
configuration alerts.What should you do?
A. You should inform all users that a shaking alert flag will appear in the index bar of the
opened windows when Aero is installed.
B. You should inform all users that once a flag appear in the taskbar with a red “x” it will
signify a problem that needs attention.
C. You should inform all users that a pop-up will occur and the contrast of Windows 7
will be faded until you acknowledge.
D. All of the above

A

Answer B.

B. You should inform all users that once a flag appear in the taskbar with a red “x” it will
signify a problem that needs attention.

169
Q

QUESTION: 169
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.
During the course of the day a network user named Rory Allen asked you which of the
Microsoft Windows Setup configuration pass applies settings to Microsoft Windows 7
before the Windows Welcome is started.
70-680
A. You should consider instructing Rory Allen that specialize Microsoft Windows Setup
configuration pass applies the settings.
B. You should consider instructing Rory Allen that the offlineServicing Microsoft
Windows Setup configuration pass applies the settings.
C. You should consider instructing Rory Allen that the oobeSystem Microsoft Windows
Setup configuration pass applies the settings.
D. You should consider instructing Rory Allen that the auditSystem Microsoft Windows
Setup configuration pass applies the settings.

A

Answer: C

C. You should consider instructing Rory Allen that the oobeSystem Microsoft Windows
Setup configuration pass applies the settings.

170
Q

QUESTION: 170
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.A Hotcerts.com user named Clive Wilson is the
company’s sales representative. When Clive Wilson is out in the field, he takes a mobile
computer named HOTCERTS-WS680 with him. Clive Wilson wants you to configure the
power settings on HOTCERTS-WS680 so that the display turns off when the computer is
inactive and running on battery power. However, the power settings of the hard disk
remain unaffected.What should you do?
A. You should configure HOTCERTS-WS680 to use the ‘Power saver’ power plan.
B. You should configure HOTCERTS-WS680 to use the ‘High performance’ power plan.
C. You should restore the ‘Power Saver’ power plan to the default settings.
D. You should change the advanced power settings of the ‘Balanced’ power plan.

A

Answer: D

D. You should change the advanced power settings of the ‘Balanced’ power plan.

171
Q

QUESTION: 171
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.You have installed Microsoft Windows 7 on a
new computer named HOTCERTS-WS680. HOTCERTS-WS680 has the following
hardware configuration: 2.4-GHz processor2 GB of RAM512-MB video adapter250-GB
hard disk.After the installation you are unable to view the Thumbnails, Previews on
folders, Transparent glass of Windows Vista. You need to ensure that the advanced visual
features of Windows Vista are displayed so you can view it.What should you do?
70-680
A. You should press the WINDOWS key and the TAB key simultaneously.
B. You should configure the system properties to optimize for best appearance.
C. You should configure the system properties to optimize for applications.
D. You should press the ALT key and the TAB key simultaneously.

A

Answer: B

B. You should configure the system properties to optimize for best appearance.

172
Q

QUESTION: 172
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.A Hotcerts.com user
named Clive Wilson has been assigned a Windows 7 Professional client computer named
HOTCERTS-WS680. Clive Wilson reports that applications on HOTCERTS- WS680 are
running slowly. You notice that HOTCERTS-WS680 has 2 GB of RAM and 250 MB free
disk space. You need to improve performance on HOTCERTS-WS680.What should you
do? (Choose TWO.)
A. You should set the total paging file to 75 percent of physical memory.
B. You should perform a disk analysis, and use the disk defragmenter, if recommended.
C. You should use disk cleanup to delete temporary files and unnecessary program files.
D. You should ensure that the performance options setting is optimized for background
services.

A

Answer: B,C

B. You should perform a disk analysis, and use the disk defragmenter, if recommended.
C. You should use disk cleanup to delete temporary files and unnecessary program files.

Explanation:
The system in this scenario is showing symptoms that Dr. King is running out of disk
space. The Disk Cleanup utility can be used to free some disk space. It’s also a good idea
to defragment the hard drive as a hard drive which is close to its maximum capacity can
become fragmented fast.

173
Q

QUESTION: 173
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7.A Hotcerts.com user named Amy Walsh has
been assigned a mobile computer named HOTCERTS-WS680. Amy Walsh needs to travel
extensively in the execution of her duties and has configured HOTCERTS-WS621 to use
the Power saver power plan. However, Amy Walsh reports that HOTCERTS-WS680 does
not shut down completely when she clicks the Power button icon on the Start menu as the
70-680
same programs that were opened when she tried to shut down the computer are still open
when she restarts the computer.You now need to configure HOTCERTS-WS680 to have it
turn off completely without saving Amy Wilson’s desktop session when she clicks the
Power button icon on the Start menu.What should you do?
A. You should click the ‘Choose what power buttons do’ link from ‘Power Options’ and
choose the option to shut the computer down when the power button is pressed.
B. You should click the ‘Change when computer sleeps’ link from ‘Power Options’ and
choose the option to never put the computer to sleep when it is running on battery.
C. You should open ‘Advanced Settings’ for the current power plan from ‘Power Options’
and change the ‘On battery’ setting in the ‘Sleep after’ category to ‘Never’.
D. You should open ‘Advanced Settings’ for the current power plan from ‘Power Options’
and change the ‘Start menu power button’ setting to ‘Shut down’.
Answer: D
Explanation:
You should change the Start menu power button setting to Shut down in Advanced
Settings. To open Advanced Settings, first open Power Options and click the Change plan
settings link associated with the Power saver power plan. Then click the Change advanced
power settings link to open the Advanced Settings dialog box. Expand Power buttons and
lid, and then expand Start menu power button. Change the On battery setting to Shut
down. This causes Windows to completely shut down when the Power button icon on the
Start menu is clicked.

A

Answer: D

D. You should open ‘Advanced Settings’ for the current power plan from ‘Power Options’
and change the ‘Start menu power button’ setting to ‘Shut down’.

Explanation:
You should change the Start menu power button setting to Shut down in Advanced
Settings. To open Advanced Settings, first open Power Options and click the Change plan
settings link associated with the Power saver power plan. Then click the Change advanced
power settings link to open the Advanced Settings dialog box. Expand Power buttons and
lid, and then expand Start menu power button. Change the On battery setting to Shut
down. This causes Windows to completely shut down when the Power button icon on the
Start menu is clicked.

174
Q

QUESTION: 174
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.
During the course of the day you receive instruction from Hotcerts.com to increase the
size of the paging file for a server named HOTCERTS-SR01.What should you do?
A. You should consider having the Advanced system settings modified from System.
B. You should consider having the System protection setting modified from System.
C. You should consider having the boot partition shrunk from Disk Management.
D. You should consider having the system partition shrunk from Disk Management.

A

Answer: A

A. You should consider having the Advanced system settings modified from System.

175
Q

QUESTION: 175
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Windows 7 Professional.You install a new application
named HCapp.exe on a client computer named HOTCERTS- WS680 and run the
application. You now want to apply various application patches to HOTCERTS-WS-680,
but you decide to perform a backup of HOTCERTS-WS680. You want all user files,
application data and application settings, as well as the operating system and system state
to be included in the backup so that you can perform a complete restore in the event of a
hard disk failure.What should you?
A. You should use Windows Backup and Restore Center to create Complete File Backup.
B. You should configure automatic restore points for all disks on HOTCERTS-WS680.
C. You should use Windows Backup and Restore Center to create Complete PC Backup.
D. You should enable the Indexing Service feature on HOTCERTS-WS680.

A

Answer: C

C. You should use Windows Backup and Restore Center to create Complete PC Backup.

Explanation:
To backup Windows 7 computers that will enable a restore in the event of a hard disk
failure, you need to create a Complete PC Backup using Windows Backup and Restore
Center . The Complete PC Backup and Restore will ensure a comprehensive, image-based
backup that will allow you to recover your entire system.

176
Q

QUESTION: 176
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You are working a
Windows 7 workstation named HOTCERTS-WS680. You want to backup data on
HOTCERTS-WS680. You open the Configure Backup wizard as shown in the exhibit
below:
70-680
You to be able to backup the data to a local disk drive. What should you do?
A. You should consider adding your user account to the Backup Operators group before
running the Configure Backup wizard.
B. You should consider starting the Volume Shadow Copy Service (VSS) before running
the Configure Backup wizard.
C. You should consider logging on to HOTCERTS-WS680 as an administrator before
running the Configure Backup wizard.
D. You should consider disconnecting all removable disks from HOTCERTS-WS680
before running the Configure Backup wizard.

A

Answer: D

D. You should consider disconnecting all removable disks from HOTCERTS-WS680
before running the Configure Backup wizard.

177
Q

QUESTION: 177
You work as the desktop technician at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The Hotcerts.com network
contains 10 Windows 2000 Server computers, 50 Windows XP Professional client
computers, 100 Windows Vista Business computers and 150 Windows 7 Professional
client computers.A Hotcerts.com user named Mia Hamm uses a Windows 7 Professional
client computer named HOTCERTS-WS680. Important business planning documents and
files are stored on HOTCERTS-WS680. You have been instructed to ensure that data on
HOTCERTS-WS680 can be recovered in the event of a disk failure. You install a robotic
tape library that contains two Digital Audio Tape (DAT) cartridges in HOTCERTSWS680.
You want to perform a full backup every Saturday afternoon and incremental
backups every Tuesday and Thursday evening. You plan to perform the full backup
manually but you want the incremental backups to take place as a scheduled task. You
also want the incremental backups made on the Tuesday evening to be written to one tape
and the incremental backups made on the Thursday evening to be written to the other
tape.What should you do to accomplish these goals?
A. For Tuesday evening, create a scheduled backup job that runs once using a tape from
the free media pool. For Thursday evening, create another scheduled backup job that runs
once using a tape from the free media pool. Then create a scheduled backup job that runs
every Tuesday evening and another that runs every Thursday evening.
B. On Tuesday evening, run a manual incremental backup job and assign a name to the
tape used for that day. On Thursday evening, run another manual incremental backup job
and assign a different name to the tape used for Thursdays. Then create scheduled
incremental backup jobs for Tuesday and Thursday evenings and specify the name of the
tape to be used in each incremental backup job.
C. Use the rsm command-line utility to run the incremental backup jobs for Tuesday and
Thursday evenings.
D. Use the Removable Storage console to assign a different name to each tape. Then
create scheduled incremental backup jobs for Tuesday and Thursday evenings and specify
the name of the tape to be used in each incremental backup job.

A

Answer: B

B. On Tuesday evening, run a manual incremental backup job and assign a name to the
tape used for that day. On Thursday evening, run another manual incremental backup job
and assign a different name to the tape used for Thursdays. Then create scheduled
incremental backup jobs for Tuesday and Thursday evenings and specify the name of the
tape to be used in each incremental backup job.

Explanation:
To ensure that the same tape gets used for the Tuesday backup and a different one on
Thursdays, you must assign the tape a name. This can be done during a manual backup
job during which you can assign a name to the tape. This name is stored in the tape’s
header and can be specified in subsequent scheduled backup jobs. This will ensure that
one tape is used for the Tuesday backup and the other is used for the Thursday backup.

178
Q

QUESTION: 178
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. You are working on a
Microsoft Windows 7 workstation named HOTCERTS-WS680 that has been infected by a
virus. You have previously performed an image backup of HOTCERTS-WS680 that you
now want to restore.What should you do? (Each correct answer presents part of the
solution. Choose TWO.)
A. You should consider selecting the Last Known Good Configuration boot option on
HOTCERTS-WS680.
B. You should consider booting HOTCERTS-WS680 from the Windows 7 DVD.
C. You should consider running the Startup Repair tool.
D. You should consider running the System Image Recovery tool.
E. You should consider booting HOTCERTS-WS680 from Windows Preinstallation
Environment (Windows PE).
F. You should consider running the Imagex.exe utility.

A

Answer: B,D

B. You should consider booting HOTCERTS-WS680 from the Windows 7 DVD.

D. You should consider running the System Image Recovery tool.

179
Q

QUESTION: 179
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. The Hotcerts.com
network contains a client computer named HOTCERTS-WS680 that is running Windows
7. HOTCERTS-WS680 contains two volumes named Volume C and Volume D.You have
created a document named HCdoc.docx on Volume D and you have manually created a
restore point for the document before editing document. You want to be able to restore the
document to its current version if and document is edited any further.What should you do?
A. You should consider starting the Volume Shadow Copy Service (VSS).
B. You should consider using the System Protection on volume D
C. You should consider enabling Auditing on the document.
D. You should consider running the Disk Cleanup on volume D

A

Answer: B

B. You should consider using the System Protection on volume D

180
Q

QUESTION: 180
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com.You are working on a
client computer named HOTCERTS-WS680 that is running Windows 7. System
Protection is enabled on HOTCERTS-WS680. You have received instructions to delete all
System Protection snapshot on HOTCERTS-WS680 except the most recent
snapshot.What should you do?
A. You should consider running the Disk Cleanup for Programs and Features.
B. You should consider restoring the previous versions of files from the System Protection
Restore settings.
C. You should consider disabling the System Restore from the System Protection Restore
settings.
D. You should consider running Disk Cleanup for System Restore and Shadow Copies.

A

Answer: D

D. You should consider running Disk Cleanup for System Restore and Shadow Copies.

181
Q

QUESTION: 181
You are employed as a network administrator at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
the Hotcerts.com network run Microsoft Windows 7.The Hotcerts.com network contains a
client computer named HOTCERTS-WS680. After a recent critical update you notice that
HOTCERTS-WS680 is unstable. You now want to use system restore to restore
HOTCERTS-WS680 to an earlier point.What should you do?

A

Answer:
Step #1:
Click on the Start button, open the Control Panel and select ‘System and Security’
Step #2:
Select ‘ Action Center ‘
Step #3:
Select ‘Recovery’
Step #4:
Click on the ‘Open System Restore’ button
Step #5:
Click ‘Next’ on the ‘Restore System Files and Settings’ dialog box
Step #6:
Select the ‘Show more restore points’ check box, select the restore point you to use and
click ‘Next’.
Step #7:
Select ‘Finish’ on the Confirm your restore point’ page.

182
Q

QUESTION: 182
Hotcerts.com has hired you as a network Administrator for their network. The
Hotcerts.com network client computers currently make use of Microsoft Windows XP
Professional. You are responsible for managing a computer named HOTCERTS-SR01 that
is configured to run Windows 7. Whilst updating the driver on the video card of
HOTCERTS-SR01 you discover that HOTCERTS-SR01 is not responding. You receive
an instruction from the CIO to recover HOTCERTS-SR01 as soon as possible.What
should you do?
A. This can be accomplished by starting HOTCERTS-SR01 from the Windows 7
installation media.Then Repair your computer should be selected. Thereafter System
Restore should be selected.
B. This can be accomplished by restarting HOTCERTS-SR01 in safe mode. Thereafter the
video card driver should be rolled back.
C. This can be accomplished by starting HOTCERTS-SR01 from the Windows 7
installation media.Then Repair your computer should be selected. Thereafter System
Image Recovery should be selected.
D. This can be accomplished by restarting HOTCERTS-SR01 in safe mode. Thereafter
HOTCERTS-SR01 should be slip back to an earlier restore point.

A

Answer: B

B. This can be accomplished by restarting HOTCERTS-SR01 in safe mode. Thereafter the
video card driver should be rolled back.

183
Q

QUESTION: 183
You work as a network administrator at Hotcerts.com. The Hotcerts.com network consists
of a single Active Directory domain named Hotcerts.com. The servers on the network run
Microsoft Windows Server 2008 and the client computers run Microsoft Windows 7.A
network user named Mia Hamm has a client computer which she regularly backups. Mia
Hamm additionally creates system image backups. During the course of the day Mia
Hamm’s computers disk fails and she replaces he failed disk drive. Hotcerts.com wants
you to recover Mia Hamm’s computer to the previous Windows environment. You started
the computer using the Windows 7 installation media.What should you do?
A. You should consider having the System Image Recovery option selected.
B. You should consider having the System Restore option selected.
C. You should consider having the Command Prompt option selected.
D. You should consider having the Startup Repair option selected

A

Answer: A

A. You should consider having the System Image Recovery option selected.

184
Q

QUESTION: 184
70-680
You work as a desktop support technician at Hotcerts.com. The Hotcerts.com network
consists of a single Active Directory domain named Hotcerts.com. All client computers on
theHotcerts.com network run Windows 7. You are working on a client computer named
HOTCERTS-WS680. HOTCERTS-WS680 is configured with two hard disk drives named
Drive C and Drive D. Both hard disks drives are formatted with the NTFS file system.
You need to disable previous versions on the Drive D.What should you do?
A. You should use the Disk Management snap-in to convert Drive D to a Dynamic
volume.
B. You should modify the Quota settings on Drive D
C. You should consider modify the Sharing settings on Drive D
D. You should modify the System protection setting from System Properties.
Answer: D

A

Answer: D

D. You should modify the System protection setting from System Properties.

185
Q
A

70-680 (1 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions