? 4 Flashcards
How many sizes does the MBU-19/P hood mask assembly come in?
4
How many VDC is required to operate the CQU-7/P blower?
28+-4
What position on the MXU-835/P comm subsystem is listen only?
2nd.
How many modes of operation does the AERP have?
4
A CQU-7/P blower failure is indicated to the wearer by what?
Loss of lens demist and increased breathing resistance.
How often do you perform operational checks on the AERP masks that are fitted for contingency ops?
18 months.
What is the max number of times you can lander the CWU-66/P?
10.
What is the min hrs of cure time for the adhesive when replacing the plenum tubes?
12
By what part of an inch must the edges overlap when repairing tears on the CWU-66/P-77/P?
.25
What is the torque required when installing the bayonet and strap assembly to the MBU-19/P?
4-6 in lbs
What is the required torque when installing the hose barb of the drinking tube assembly to the pass through on the 19/P mask?
5 in lbs
How many hours must be allowed for the silastic adhesive to cure when you replace the mic on the AERP mask?
24
How should the AERP tear away knobs be positioned during wear?
Under the lower harness straps.
When fitting the 19/P to a non helmeted system the face piece should be trimmed no more than what fraction of an in during the first cut?
1/8
What is the max lenght the 19/P mask adj strap can be after a proper fit is made?
3
What is the length of the 66/P is over 6ft 1in?
Long.
What is the purpose of the ACCA?
Detection, contamination control, and processing provisions for aircrew.
When setting up an ACCA once the consistent wind direction is determined, the processing direction is established at a
45-60 degree angle towards the wind.
Who is responsible for dividing manpower into groups or teams by color when setting up an ACCA?
ACCA manager.
What item is not used for decon of equipment in the field?
Detergent and water.
What is the min manning for ACCA line?
5
As an AFE journey man what is your first responsibility upon arrival of aircrew members from ground operations when chem or bio contaminant is suspected?
Apply all available decon methods to detect contaminates of personnel and assets.
Up to how many attendants may be required to process one aircrew member in area 1 of the ACCA line?
3.
What area of the ACCA is the boot and protective garment removal phase?
3
How many main components does the counter radiological warfare concept of operations consist of?
3
What is the minimum hours following an event in which installations will receive specialized federal assets?
12
