3.9: Airspace Flashcards
When a control tower located on an airport within Class D airspace ceases operation for the day, what happens to the airspace designation?
The airspace reverts to Class E or a combination of Class E and G airspace during the hours the tower is not in operation.
A non-tower satellite airport, within the same Class D airspace as that designated for the primary airport, requires radio communications be established and maintained with the
primary airport’s control tower.
The lateral dimensions of Class D airspace are based on
the instrument procedures for which the controlled airspace is established.
Unless otherwise authorized, two-way radio communications with Air Traffic Control are required for landings or takeoffs at all towered airports
regardless of weather conditions.
Airspace at an airport with a part-time control tower is classified as Class D airspace only
when the associated control tower is in operation.
When should pilots state their position on the airport when calling the tower for takeoff?
When departing from a runway intersection.
The radius of the procedural outer area of Class C airspace is normally
20NM
Under what condition may an aircraft operate from a satellite airport within Class C airspace?
The pilot must contact ATC as soon as practicable after takeoff.
All operations with Class C airspace must be in
an aircraft equipped with a transponder with automatic altitude reporting capability.
Which initial action should a pilot take prior to entering Class C airspace?
Contact approach control on the appropriate frequency.
The vertical limit of Class C airspace above the primary airport is normally
4000 feet AGL
Two-way radio communication must be established with the Air Traffic Control facility having jurisdiction over the area prior to entering which class airspace?
Class C
With certain exceptions, all aircraft within 30 miles of a Class B primary airport from the surface upward to 10,000 feet MSL must be equipped with
an operable transponder having either Mode S or 4096-code capability with Mode C automatic altitude reporting capability.
What minimum pilot certification is required for operation within Class B airspace?
Private Pilot Certificate or Student Pilot Certificate with appropriate logbook endorsements.
What minimum pilot certification is required for operation with Class B airspace?
Private Pilot Certificate or Student Pilot Certificate with appropriate logbook endorsements.
The basic VFR weather minimums for operating an aircraft within Class D airspace are
1,000-foot ceiling and 3 miles visibility
You would like to enter Class B airspace and contact the approach controller. The controller responds to your initial radio call with “N125HF” standby.” May you enter the Class B airspace?
You must remain outside Class B airspace until controller gives you a specific clearance.
In which type airspace are VFR flights prohibited?
Class A
The minimum flight visibility required for VFR flights above 10,000 feet MSL and more than 1,200 feet AGL in controlled airspace is
5 miles
VFR flight in controlled airspace above 1,200 feet AGL and below 10,000 feet MSL requires a minimum visibility and vertical cloud clearance of
3 miles, and 500 feet below or 1,000 feet above the clouds in controlled airspace.
For VFR flight operations above 10,000 feet MSL and more than 1,200 feet AGL, the minimum horizontal distance from clouds required is
1 mile
What minimum flight visibility is required for VFR flight operations on a airway below 10,000 feet MSL?
3 mile
The minimum distance from clouds required for VFR operations on an airway below 10,000 feet MSL is
500 feet below, 1,000 feet above, and 2,000 feet horizontally.
What minimum visibility and clearance from clouds are required for VFR operations in Class G airspace at 700 feet AGL or below during daylight hours?
1 mile visibility and remain clear of clouds