3 Point Brake Check

Question 1

Step 1

Answer 1

Bring PSI down to About 90 or below to begin the test.

Question 2

Step 2

Answer 2

Allow the air pressure to build until the air governed cut out between 120-140 PSI and the needle in my gauge stop that indicate me it’s stabilized.

Question 3

Step 3

Answer 3

Turn the engine off and then back into the on Possession with out starting the engine and my gauge will sweep.

Question 4

Step 4

Answer 4

Push in both Brake Valves.

Question 5

Steep 5

Answer 5

Allow air pressure to stabilize. ( the needle will stop )

Question 6

Step 6

Answer 6

Firmly apply and Hold the service brake for one minute to Ensure they I have not lost More than 4 PSI in a Combination Vehicle equipped with Air Brake on the Trailer.

Question 7

Step -7

Answer 7

FAN BREAK DOWN TO ABOUT 60 psi

Until my low Air pressure auto warning light and buzzer come on.

Question 8

Step 8

Answer 8

Fan Break down to about 40 psi Untill Both Valves pop out Verify that Both Break Valves popped out concluded 3 pt Break test