2.4 Flashcards
A ______________ relay agent can be configured to provide forwarding of DHCP traffic between different subnets.
DHCP
A ____________ record is found in reverse lookup zones and is used to resolve an IP address to an associated host name.
PTR
The _______________ connects storage area networks using 3 main types of components: the initiator, the target, and the Fibre Channel switch
Fibre Channel
The___________ is the client device of the SAN
initiator
The ____________ is the network port for a storage device.
target
The Fibre Channel switch, sometimes referred to as a _________ , provides the connections between the initiator and the target
director
The _______________ layer provides fault-tolerant interconnections between different access blocks.
distribution/aggregation
The _______________ can link Storage Area Networks (SANs) but is also seen as an alternative to Fibre Channel itself since it works over ordinary Ethernet network adapters and switches.
iSCSI
IPV4 depends heavily on the Dynamic Host Configuration Protocol (DHCP) for address autoconfiguration. IPv6 uses a more flexible_____________________
system of address autoconfiguration called stateless address autoconfiguration (SLAAC).
The 192.168.1.128/26 network provides ________ assignable IP addresses in the range of 192.168.1.129 - 192.168.1.190. This is enough addresses to support the 50 computers of the marketing department.
62
The __________ address is a reserved address, typically an IPv4 address of 127.0.0.1. It is often used to check that TCP/IP is correctly installed on the local host
loopback
The _______________________ is the router. A layer 3 switch can operate on the network layer to route traffic. Pinging the gateway will verify that a path exists to eventually route to other offices.
default gateway
A _______________ address identifies multiple network interfaces. Unlike Internet Protocol version 4 (IPv4), Internet Protocol version 6 (IPv6) must support multicast. The first 8 bits indicate the address is within the multicast scope (1111 1111 or ff). The address ff02::1 has a target of all link-local nodes.
multicast
The CompTIA troubleshooting methodology:
Identify the problem
Establish a theory of probable cause
Test the theory to determine the cause
Establish a plan of action to resolve the problem and implement the solution
Verify full system functionality, and, if applicable, implement preventive measures
Document findings, actions and outcomes