2022 Flashcards
What are the three levels of safe?
Arm/safe switch
Weapon Action Switch
Finger off the trigger
What is the difference between the first and second level detent when actioning the LRFD?
Squeezing the laser trigger to the first detent fires three bursts of laser energy for ranging.
Squeezing the laser trigger to the second detent fires a continuous burst of laser energy for target designation and continuous range updates.
What is the minimum steady-on lasing time required for the target state estimator (TSE)?
Continuous, steady-on lasing for a minimum of four seconds.
How long will the target state estimator (TSE) continue to update once the LRFD is released?
10 seconds
What is linear motion compensation (LMC)?
A tool that allows for easier target tracking with the TADS LOS.
Is the current range source and range important to the linear motion compensation (LMC) when the aircraft is stationary? When moving?
No, yes
What is the gun duty cycle for the 30mm AWS?
The gun duty cycle is as follows:
-Six 50-round bursts with 5 seconds between bursts followed by a 10-minute cooldown.
-For burst limiter settings other than 50, the cycle can be generalized as no more than 300 rounds fired within 60 seconds before allowing the gun to cool for 10 minutes, after which the cycle can be repeated.
What are the characteristics of the M788 training round?
Blue projectile with a white stripe
What are the training characteristics of the M789 HEDP?
A black projectile with a yellow band below the fuze with yellow lettering
What kind of armor can the M789 penetrate?
Piercing in excess of 2 inches of Rolled Homogenous Armor (RHA) at 2500 meters.
What is the burst radius of the M789 HEDP?
4 meters
Where should you place the LOS reticle when engaging stationary targets with the 30mm AWS?
When engaging exposed personnel, the DMPI should be offset and/or short of the target to achieve the desired effects.
What considerations must the crew have when engaging with 30mm AWS from the CPG crewstation against moving targets? Why?
When engaging moving personnel targets with the M-TADS as the selected sight, the weapon’s processor requires a steady LOS on target and accurate range source for approximately three seconds.
TSE
What is the purpose of dynamic harmonization?
Verify the accuracy and safety of the 30mm AWS before use.
What are the range limitations for dynamic harmonization?
500-1500 meters
What is the warning associated with 30mm AWS stoppage?
If 300 or more rounds have been fired in the proceeding 10 minutes and a stoppage occurs, personnel must remain clear of the aircraft for 30 minutes. Crewmembers should remain in the aircraft and continue positive gun control.
What are the three rules for a solid Next to Shoot icon?
Sight selected FCR
Weapon system actioned
Aircraft armed
When will the FCR provide a secondary target?
During stationary target handovers, the FCR has the capability to handover two targets to the same missile. If the FCR acquires two targets with zero velocity within a certain footprint, it may supply both target vectors to the missile.