2013 Recalled Flashcards
What is the value of the diameter of the seal of a registered Agricultural Engineer which inscribed by a
circle
42 mm
What will be the penalty of an agricultural engineer or foreign AE allowed to practice agricultural
engineering in the Philippines if he is found to have committed any of the ff.
a. use or perpetuation of any fraud or deceit in obtaining a certificate of registration
b. Incompetence
c. Negligence
d. Abetting the illegal practice of agricultural engineering and
e. Violations of any provisions of RA 8559, its implementing rules and regulations,code of ethics and
professional standards for agricultural engineers, and the policies adopted by the board.
Grounds for the revocation or Suspension of Professional License
PAES 415:2001 Greenhouse. method of greenhouse construction where modular roof units are connected
at the eave by a common gutter
ridge and furrow greenhous
Radius of Curvature ..The minimum radius design for curvature shall be _____ meters
for flat terrain, _____ meters for rolling terrain and ______ meters for mountainous terrain.
500, 150, 50
PAES 421:2009 FMR. Type of Roadside ditch that easily be constructed and requires less right-of-way shall be determined by considering the intended purpose, terrain, flow velocity and quantity of flow to be
conveyed and intended primarily for low flow conditions such as in median and roadside ditches
Triangular V-Ditch
PAES 413:2001. Biogas Plant mixture of gas (composed of 50 to 70 percent methane and 30 to 40
percent carbon dioxide) produced by methanogenic bacteria
biogas
housing for goat and sheep .Lighting intensity requirement for the house of goat and sheep
200 lux
PAES 210:2000. Cornmill milled corn kernels with particle size between 0.86 mm to 1.09 mm
grit # 18
PAES 210:2000. Cornmill milled corn kernels where the outer covering and germs have been removed and
with particle size of not less than 0.86 mm
corn grits
PAES 210:2000. Cornmill milled corn kernels with particle size between 1.8 mm to 2.0 mm
grit #10
PAES 210:2000. Cornmill ratio of the weight of corn grits, to the total weight of corn kernel input, expressed in percent
main product recovery
PAES 201:2000. Heated Air Mechanical Grain Dryer. dryer in which the products of combustion do not come in contact with the products being dried
indirect-fired dryer
PAES 201:2000. Heated Air Mechanical Grain Dryer batch type dryer wherein a fixed volume of grain is
held stationary in a vertical grain holding bin
vertical bin type
PAES 201:2000. Heated Air Mechanical Grain Dryer ratio of the total heat utilized to vaporize moisture in the material, to the amount of heat added to the drying air expressed in percent
heat Utilization efficiency or drying efficiency
Waste Management Structure: Level of Bio-Chemical Oxygen Demand
<150
AWG sizes that equal to 10,000 circular mils.
AWG#10
Area covered by 1 gallon of acrylic paint for the first coating
20m2
Area covered by 1 gallon of acrylic paint for the second coating
25m2
Operating pressure classification of sprinkler
Low <150 kPa
Medium - 150 kPa to 350 kPa
High >350 kPa