2.0-2.2 Flashcards

1
Q

An engineer has a task to survey an old building and determine the current network infrastructure. Building owners state that some cabling is from a recent install. The engineer achieves a speed of 10 Gbps while testing the cable up to 100 meters and also determines the cable to be well shielded. Based on the engineer’s findings, the cabling meets what specification?

Cat 3
Cat 6
Cat 5e
Cat 7

A

Cat 7

Cat 7 cable is fully screened and shielded (S/FTP) and rated for 10GbE applications
up to 100 m (328 feet). The cable supports transmission frequencies up to 600 MHz at 10 Gbps.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

An engineer installs fiber cable between two buildings on a large company campus. Which type of fiber optic cable does the engineer use?

LC
Multimode
F-type
Single-mode

A

Single-mode

Single-mode fiber cables support data rates up to 10 Gbps or better and cable runs of many kilometers, depending on the quality of the cable and optics.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

A wiring professional terminates the ends of some coaxial cables. Which one of these connectors can the professional use?

ST
DB-9
BNC
LC

A

BNC

A Bayonet Neil-Concelman (BNC) connector is a twist and lock type of connector that is used with coaxial cable.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Network equipment in a rack system has limited in-front facing space with the door closed. A technician uses small form-factor connectors to connect a fiber cable. After evaluating the choices, predict the correct fiber connectors for the system.

LC
ST
APC
UPC

A

LC

A lucent connector (LC) is a small form factor version of the SC push-pull fiber optic connector. It is available in simplex and duplex versions.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

A network link offers simultaneous communications in each direction. Of the following choices, which defines this functionality?

Duplex
Straight-through
Multimode
Bidirectional

A

Duplex

Duplex is a communication configuration. Full-duplex refers to a communication type, such as network links, that allow simultaneously sending and receiving. Most network links are full-duplex.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

A licensed wiring professional runs Cat 6A cable in lengths under 55 meters in an office building. What specification of cabling does the professional install?

100BaseT
1000BaseLX
1000BaseT
10GBaseT

A

10GBaseT

10GBaseT Ethernet specifies speeds of 10 gigabits. Cat 6, 6A, and 7 twisted pair cables fall under the 10GBaseT Ethernet specification.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

An engineer creates several Ethernet cables and chooses to terminate the cable ends with the orange pair using pins one and two. Considering the standard choices, which of the following does the engineer choose to implement?

TIA/EIA 568b
TIA/EIA 568a
RJ-11
RJ-45

A

TIA/EIA 568b

There are two defined methods for terminating Ethernet connectors: T568A and T568B. While T568A is mandated, T568B is the more widely deployed of the two.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

A network link offers simultaneous communications in each direction. Of the following choices, which defines this functionality?

Duplex
Bidirectional
Straight-through
Multimode

A

Duplex

Duplex is a communication configuration. Full-duplex refers to a communication type, such as network links, that allow simultaneously sending and receiving. Most network links are full-duplex.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

A company plans a network run to a warehouse behind its main office building. The distance is short and to save money, the IT engineer suggests using a specific type of fiber cabling. Which type does the engineer recommend implementing, based on the given criteria?

Multimode
Single-mode
Bidirectional
Duplex

A

Multimode

Multimode fiber is inexpensive to deploy compared to single-mode fiber. As such, it does not support long distances as single-mode and is more suitable for Local Area Networks (LANs) than Wide Area Networks (WANs).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

An engineer uses fiber optic cable for a run within a building. Which type of transceiver does the engineer use to achieve 40 Gbe speed?

GBIC
SFP+
RG-59
QSFP

A

QSFP

Quad Small Form Factor Pluggable (SFP) (QSFP and QSFP+) is a transceiver form factor designed to support 40 GbE plus other high bandwidth applications (including InfiniBand and SONET). Essentially it combines 4 SFP or SFP+ links.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

A company requires connectivity between two buildings. The buildings are over 750 meters apart. IT engineers suggest which type of fiber cabling?

Duplex
Multimode
Single mode
Straight-through

A

Single mode

Single-mode fiber cables support data rates up to 10 Gbps or better and cable runs of many kilometers, depending on the quality of the cable and optics.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

A wiring expert runs new Ethernet cabling in an office. The chosen cable type allows for distances of 100 meters (328 feet) with speeds of 10 Gbps, fully screened and shielded. Based on the characteristics of the standard Ethernet cable categories, which should the expert install?

Cat 6
Cat 3
Cat 5e
Cat 7

A

Cat 7

Cat 7 cable is fully screened and shielded (S/FTP) and rated for 10GbE applications
up to 100 m (328 feet). The cable supports transmission frequencies up to 600 MHz at 10 Gbps.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

An engineer uses fiber optic cable for a run within a building. Which type of transceiver does the engineer use to achieve 40 Gbe speed?

GBIC
RG-59
SFP+
QSFP

A

QSFP

Quad Small Form Factor Pluggable (SFP) (QSFP and QSFP+) is a transceiver form factor designed to support 40 GbE plus other high bandwidth applications (including InfiniBand and SONET). Essentially it combines 4 SFP or SFP+ links.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

A network engineer installs a layer 3 device to connect several networks with differing subnets. Which device does the engineer implement to achieve the desired connectivity?

Router
Bridge
Hub
Switch

A

Router

A router is a hardware appliance or application that connects different networks/subnets for communication purposes but keeps them as separate networks. A router is a layer 3 device, and communication between networks occurs with routing tables.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

A systems administrator installs a connectivity device that results in a high number of data collisions. Which device did the administrator install?

Media converter
Hub
Switch
Bridge

A

Hub

A hub (also known as a dumb device) connects computers to a network in a star configuration. A hub lacks the features contained in a switch such as traffic control based on physical addressing.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

A department in an organization asks a systems administrator to set up a small network for a test project that consists of five computers. The admin searches the storage for a spare device to make the connection. Considering the functionality of network connectivity devices, which options can independently satisfy the requirement?

Bridge
Firewall
Switch
Router

A

Switch

A switch is a layer 2 device. Switches can
handle traffic based on a node’s physical address (also known as a Media Access Control (MAC) address). A switch is useful in this scenario.

17
Q

A systems engineer documents a customer’s network. Knowing that all of the hosts connect in a physical star configuration, which data link layer device utilizes this type of topology?

Hub
Switch
Router
Bridge

A

Switch

A switch is a data link layer (layer 2) device. Switches can handle traffic based on a node’s physical address which is also known as a Media Access Control (MAC) address. A switch is useful in a physical star configuration.

18
Q

An engineer configures a wireless distribution system (WDS) in bridged mode. As a result, which of the statements are true regarding access point functionality?

Access point functionality only assigns distribution systems to a single access point.

In bridged mode, access point functionality does not centralize wireless management.

In bridged mode, access point functionality does not support wireless clients.

Access point functionality works in repeater mode only.

A

In bridged mode, access point functionality does not support wireless clients.

A wireless distribution system (WDS) can bridge two separate cabled segments. When WDS is in bridge mode, the access points (AP) will not support wireless clients.

19
Q

A user reports that the phone software installed on a PC does not seem to be working. An engineer determines that the user’s handset is not functioning correctly as well. The engineer investigates which of the following options to remedy the issue?

VoIP endpoint
Bridge
Switch
Media Converter

A

VoIP endpoint

A VoIP (Voice over Internet Protocol) endpoint is a phone system component that can be implemented as software running on a computer or smartphone, or as a dedicated traditional handset.

20
Q

A server contains two ethernet cards. Two departments on separate networks need access to the server and resources on either side. A systems administrator configures a bridge with the interfaces. The administrator utilizes a bridge configuration to achieve which of the following?

Connecting different networks for communication purposes but keeping them separate

Connecting devices within a single network

Connecting different networks as if they were one

Protecting differing networks from one another

A

Connecting different networks as if they were one

To connect systems within a single network subnet, a hub or a switch is used. A hub is simply a physical hardware device, whereas a switch is a layer 2 device.

21
Q

A Windows server with multiple network interface utilizes a configuration to join multiple subnets as one. Which configuration do the network cards use?

Bridge
Router
Switch
Media converter

A

Bridge

A bridge is an appliance or application that connects different networks as if they were one network.

22
Q

A Windows server with multiple network interface utilizes a configuration to join multiple subnets as one. Which configuration do the network cards use?

Media converter
Switch
Router
Bridge

A

Bridge

A bridge is an appliance or application that connects different networks as if they were one network.