2. Selecting and Setting Teeth On Interim Immediate Dentures Flashcards
2
In your oral examination, you need to evaluate what two things with the teeth?
2
In the oral examination, what three things do you need to analyze with the lips?
3
What five things should you assess on your articulate casts?
4
What are the two parts of the mode of anterior tooth selection?
4
What are the 3 forms of tooth?
4
How do you determine size of the tooth selection?
4
What 3 measurements do you need to make for tooth size selection?
4
If you cannot measure the canines because they are not present, what should you look for as an alternative?
5
What are 5 references you can use to select anterior teeth for an interim denture?
7
What is the Ivoclar facial meter used for?
7
Once you have used the facial meter to determine small, medium, and large, what do you determine next on the patient?
7
After selecting bold vs. soft characteristics, what is selected next?
8
In order to get teeth in the clinic, what MUST be done?
9
What are the shades we have in stock for Interims?
9
If you want other tooth shades, how many days can they take to arrive once ordered?
10
What is the teeth system used for Final Complete Dentures, Immediate Dentures, and Metal Framework Parts?
10
What is the system used for Interim Complete Dentures and Interim Partial Dentures?
11
On a tooth guard, what is the symbol on the right and what is the symbol on the left? (example A1 and P5).
14
If the natural tooth arrangement is not esthetic, what three things should you reestablish?
14
When setting teeth, should you do one side at a time?
14
You can do a _______ for esthetic try-in if necessary.
16
What can you use to mark super erupted teeth when analyzing the incisal edge position?
16
What can be used to build up the incisal edge of worn teeth as a mock-up?
17
On the cast, how will you preserve the incisal edge position and tooth angulation information prior to removal of the stone teeth?
18
When marking the cast prior to removing teeth, use a Boley gauge to mark a horizontal line that is ______ apical to the incisal edge of each tooth. After this, mark the _____ of each tooth. This process helps preserve the _____ when you go to set the teeth.
19
Are stone teeth removed sequentially or all at once?
This is about immediate denture opposing mandibular natural teeth.
21
Set the denture teeth so that the incisal pin is ____ away from the incisal table. Then, mark the occlusal contacts with articulating paper to remove the high contacts until the pin ______.
24
What are the two occlusal objectives once the teeth are set? What is the term for this?
26
What does the posterior line of the posterior palatal seal connect?
26
For the posterior palatal seal, place the bead seal at the _______ and _______.
26
What is the butterfly line?
27
What is the purpose of the posterior palatal seal?
27
What two things does the posterior palatal seal compensate for? What are four other purposes for it?
28
Intra-orally, what do you use to mark the posterior palatal seal of the denture? Then, palpate the glandular tissue to determine the ______.
28
Posterior paltal seal can be carved to what depth of the tissue that is compressed? So, if compressed tissue is 2mm, the PPS in that area can be carved to what?
29
What will you draw anterior to the posterior extension of the denture? What gets drawn anterior to this?
29
The bead seal should not extend onto ________ or a _______.
29
What should the depth of the bead seal be? What measurement should it be as it feathers out into the mid-palatal suture line? (image on slide 30)
31
What is the ideal measurement for the thickness of the wax? Where should the wax extend up to on the linguals?
32
How many days will it take to process after writing a lab authorization?
32
What are 7 things you need on your lab authorization?
35
What is the yellow sheet from Lanny for?
35
Should you schedule the 24 hour and 1 week checks at the same time as the extractions?
36
After wax boil out stage, what should you do to the interproximal points before packing?
37
When rehydrating the denture, let is sit in a low pressure container for _____ and then soak it in water for _____.
38
What is fabricated with silicone putty and plaster base which is placed into the processed denture?
38
What is the name for the vacuum template that goes onto the silicone cast replica?
39
What is the purpose of the clear surgical stent?
40
If you are going to be delivering a denture in OS, what do you need to do at the start of clinic?
40
What does PIP help us see?
40
What should you analyze your denture for?
42
What side is PIP used on and what does it check?
43
Any hint of wide or long denture borders requires analysis with what?
43
Which surface is PIP for vs. disclosing wax?
48
What appointments are mandatory for all removable prostheses?
49
What are 5 things done at the 24 hour check?
51
What are 4 things done at the 1 week check?
51
Sometimes at the 1 week check you will need to do a _______.
53
What is the purpose of a soft liner?
53
How much space is required for soft liner?
53
Spatulate the soft liner on the _____ after initial mix
53
What is the working time of soft liner?
53
Soft liner needs to be replaced every _____.
54
What is the brand of tissue conditioner at Creighton? What about Soft Liner brand?
54
How long does Tissue Conditioner last vs. Soft Liner?
54
Ideally, you do not want to use Tissue Conditioner unless ______.
54
With tissue conditioner or soft liner, the patient should not soak the denture in what? What can happen if you do this?
56
Tissue conditioner or soft liner are no cost to the patient if completed _______.
57
What are 4 indications for tissue conditioner?
57
Why should you delay use of Tissue Conditioner for 1 week if possible?
59
Tissue conditioner that extends into the _______ must be removed?
64
Resilient soft liner displays _____ plastic behavior than tissue conditioner and ____ flow characteristics.
64
When do you use resilient soft liner?
68
Where do you not place adhesive when making a new soft liner?
69
When redoing the soft liner, place from ____ and run to ____, making sure to pull over the ______.
74
What consistency should the sealing layer be for the soft liner?
75
What is the purpose of the sealing layer?
