1st Part Of Flow Flashcards
CP1
Cockpit Lights
-set INT Lt, flood, integ lt
Cp2
ISIS
CP3
Adjust seat
CP (FO)
ATIS then RMP set
B4 pushback or start (CA)
APU - check AVAIL
B4 pushback or start (FO)
APU - start
After start (CA)
🔷”Anti-Ice on” if rqrd
After start (FO)
Eng mode selector - NORM
Taxi mini brief
Runway
SID
CONFIG
Fuel
Flex
V1
V2
Initial altitude
Transition altitude
Hdg and/or first fix
Eng 2 start (single eng taxi)
APU bleed on
Taxi - 3 min b4 (CA)
MCDU - perf/F-plan
Taxi - 3 min b4 (FO)
Brk temp & fan
Line up (CA)
Line up C/L
Line up (FO)
Eng mode sel - norm (IGN)
After T/O (PM)
After retracting flaps - Bleeds/Packs - set
Climb 10,000 (PF)
- EFIS
- MCDU
Transition altitude - 🔹” set standard “
“Check” - Seat belts
Climb 10,000 (PM)
FA CALL BELL 🔔
LIGHTS 💡
PM Cruise tasks (recommended)
Top of climb:
1.(C) delays - send if rqrd
2. Ecam Memo - Review
3. Nav Accuracy - check
4. TCAS - as desired
5. Fuel - check
6. Winds & temps - insert
En Route:
1. Ecam Sys pages - Review
2. Fuel
3. Flight progress - check
Descent tasks (PF)
Wx radar - as rqrd
Decent tasks (PM)
Terr on ND - as rqrd
10,000 descent (PF)
- Speed - select if rqrd
- 🔹 request Approach phase activation- if rqrd
10,000 descent (PM)
- (C) L&R land lights - on
- (C) wing lights
- **NAVAIDS ** - identify
Landing (PF)
1.🔹” Landing C/L”
2. Sliding table
Landing (PM)
- A/Thr - check speed (off)
- Ecam memo - check
- Wing anti-ice - off (on)
- Sliding table - stow
🔸 read Landing C/L
After landing (CA)
After clearing rwy
1. Grnd SPLRS - Disarm
After landing flow
2. Lights
🔹” after landing C/L
✔️complete, cooling, straight line
🔹” shut down eng 2”
After landing (FO)
Clear rwy
1. Chrono - START
Flow
2. Radar & PWS -OFF
Engine 2 shutdown (FO)
- Y electric pump - on
Approaching gate
-APU start
Parking (CA)
- Parking BRK - ON
Parking (FO)
When stopped
-Arrival gate report - complete
Both engines shut down
1. Y elec pump - off
