1.3 Summarize The Types Of Cables And Connectors And Explain Which Is Appropriate Flashcards
Corporate had requested the installation of a new fiber link that supports 160 channels. What type of multiplexing is required to meet corporate’s request?
O QSFP+
O CWDM
O WDM
O DWDM
DWDM
A network installer is building a long-distance link. The nodes are approximately 5 km apart. What type of fiber link should the installer build for this link?
O 100BASE-SX
O 100BASE-FX
O 1000BASE-LX
O 10GBASE-SR
1000BASE-LX
An engineer has a task to survey an old building and determine the current network infrastructure. Building owners state that some cable to be well shielded. Based on the engineer’s findings, the cabling meets what specification?
O Cat 6
O Cat 3
O Cat 7
O Cat 5e
Cat 7
An engineer is building a backbone network in a new facility. The cabling going from one side of the building to the other is about 500 feet and will support a 5Gbps link between two routers. Which type of cabling should the engineer use?
O 10GBASE-SR
O 1000BASE-SX
O Coaxial/RG-6
O 10GBASE-LR
10GBASE-SR
A technician finishes running fiber optic cable across a large building to expand the internal network. The fiber connects to equipment in a rack with extremely limited space for a connector. Considering the situation and the types of available fiber connectors, which one will accomplish connectivity?
O APC
O UPC
O SC
O LC
LC
An organization has asked a junior network technician to retrieve some swappable ports that host a single LC connection per port. Since there are numerous inserts for network devices, which should the technician retrieve?
O SFP
O QSFP
O RJ-45
O F-type connector
SFP
A network engineer is troubleshooting an ethernet connection between two buildings. The engineer noticed that the network devices got upgraded, but the wiring did not. The engineer needs a connection that can handle 10Gbps at 500 MHz for a distance of 300 feet using RJ-45 connectors. What type of ethernet should the engineer replace the Cat 5 with to meet the connection standard?
O Cat 8
O Cat 7
O Cat 6a
O Cat 6
Cat 6a
An IT engineer considers optical mode OM1 or OM2 cables for project. The project requires cables that are rated for applications up to 1 GBPs and use LED transmitters. Of the following choices, which type of cable does the engineer select to use?
O Single-mode
O Multimode
O Duplex
O Biderectional
Multimode
A network technician is installing a new ethernet receptacle using a punch tool. Which blade type can the technician utilize to terminate the wires onto the punch block?
O 66
O RJ-11
O RJ-45
O 110
110
An organization has asked a junior network technician to retrieve some swappable ports that host a single LC connection per port. Since there are numerous inserts for network devices, which should the technician retrieve?
O RJ-45
O SFP
O F-type connector
O QSFP
SFP
An IT engineer chooses to use a fiber cable implementation that uses light emitting diode (LED) technology rather than one that uses lasers. Considering the optic technology in u se, what does the engineer implement?
O Single-mode
O Bidirectional
O Multimode
O Duplex
Multimode
A network installer is installing new phone lines into the network room. The installer has many blades for the punch down panels in the building and needs a blade that is customizable on one end. Which blade should the installer use that has customizable blade on one end of the punch tool?
O 110
O Krone
O 66
O Bix
Bix
A server administrator has asked a junior network engineer to build a link between the server and the new SAN that the administrator just installed. The speed requirements for the link are more than 20Gbps, and the distance is about 20 feet. What medium should the network engineer use to build the required link?
O 10GBASE-T
O 10BASE-T
O 1000BASE-T
O 40GBASE-T
40GBASE-T
A network technician is installing a new router in a new wing of the corporate building.
The technician needs to connect the new router to the core router. The router is about 300 feet away from the core router and requires a 100Mbps connection. What type of connection should the technician build for the router?
O 10BASE-T
O Coaxial/RG-6
O 100BASE-TX
O 10GBSE-T
100BASE-TX
An engineer creates several Ethernet cables and chooses to terminate the cable ends with the orange pair using pins one and two. Considering the standard choices, which of the following does the engineer choose to implement?
O RJ-45
TIA/EIA 568b
TIA/EIA 568a
RJ-11
TIA/EIA 568b
