11-251 Ch 3 Flashcards
Climb speed and attitude below 10k
300 KCAS 7 set NH
Terminate afterburner between what speeds and no later than
220- 280
300
How do you calculate IMN
IMN = .52 + altitude [in thousands]/100
Ex: FL220, IMN = .52 + 220 = .74 mach
If VVI is less than 6000 fpm begin level off when?
10% of VVI
As a technique, below 10k’ set what fuel flow to maintain 300 KCAS
1200 pph
A min mach caret (MM) will appear on the MFD above what altitude
FL280
Above 35000k fly no slower than
0.9 Mach
Normally slow to ______ KCAS or less on base approximately ____ to ____ miles from touchdown on extended center line
240 , 10 - 15
Begin closed pull up with a minimum of ___ KCAS
240
Maintain a minimum of ____ KCAS in the closed pull up until wings level on downwind
200
Maintain a minimum of ______ airspeed on downwind
Final Turn speed
Normal rollout point is approximately ___ - ___ AGL at ___ to ___ NM from rwy threshold
300 - 390 ft
1 to 1.3
Maintain ___ AOA throughout final turn and on final
0.6
Final Turn is “made” when
30
0.6
30
VVI on final should be approximately
700 - 900 fpm
The normal HUD off aimpoint for Full Flaps is
The top of the HUD combining glass
Touch down speeds are approximately ___ KCAS below final app speeds
20-25
When crosswinds exceed ___ KCAS plan to touchdown on the upwind side of the runway
15
Set the simulated failed engine not less than ___ % rpm during a simulated single engine approach
60
GX/G awareness parameters
MIL power
GX - 420 +/- 20 KCAS
8-10 deg NL 4-4.5 Us
18-20 deg NL 5-5.5 Gs
Full Aft stick requirements
Begin FL200 with no less than 80% rpm
