103d Assembly Dismantling and Clamping Worksheet Flashcards
When finishing, what is one advantage of the curved claw hammer?
Allows the nail to be driven flush without the surface marring the wood
Easier for nail pulling
What tool is used to finish driving a nail head below the surface of a piece?
nail set
what colour handle is a number 2 tipped Robertson screwdriver?
red
What type of clamp would you use to affix a jig to a drill press?
c-clamp
What type of clamp would you use to hold small pieces on a jig?
toggle clamp
The clamp with wooden jaws that is used for angled pieces is the
hand screw clamp
Which tool is suitable for extracting small nails and cutting small fasteners off close to the surface?
end nipper pliers
What should be avoided when clamping material?
Nesting the clamp against the work piece
A hollow plastic mallet filled with lead shot is a:
Dead blow mallet
Name the screwdriver whose head is in the shape of a six-pointed star
Torx tip screwdriver
Which wrench allows you to use various attachments?
socket wrench
Which dismantling tool has the longest handle?
ripping bar
When clamping what is a common way to check for square?
Check your diagonal measurement are the same
A hammer used for framing is a:
22 to 32 oz straight claw hammer with a knurled face
A green-coloured Robertson screwdriver correlates to what number?
1
Fast action bar clamps are to be avoided when holding jigs or guiding machinery
true or false
true
The staple gun tacker’s advantage over the hammer tacker is:
Staples can be positioned more precisely
What tool is best for cutting chain links and light reinforcing steel?
bolt cutters
Bar clamps should never be used with cauls (clamping blocks).
true or false
false
A smaller, more controllable hammer is preferred when:
finishing
