1-36

Question 1

Overall responsibility for compliance with API 653

Answer 1

owner

1.2

Question 2

Evaluate deterioration on existing shell material

Answer 2

Engineer

4.3.1.2

Question 3

In a corroded area, find t2 (thinnest area exclusive of pit)

Answer 3

Inspector

4.3.2.1.a

Question 4

In a corroded area, determine the vertical lines (L)

Answer 4

Inspector

4.3.2.1.c

Question 5

Perform the Routine In-Service inspection

Answer 5

Operator

6.3.1.1

Question 6

Perform the External inspection

Answer 6

Owner

6.3.2.1

Question 7

Determine the extent of UT measurements not he shell

Answer 7

Owner

6.3.3.1

Question 8

Review the results of CP surveys

Answer 8

Owner

6.3.4.1

Question 9

Assure competency of personnel performing CP surveys

Answer 9

Owner

6.3.4.2

Question 10

Perform the Internal inspection

Answer 10

Inspector

6.4.1.2

Question 11

Assure quality and completeness of in-service NDE (robotics) examinations

Answer 11

Inspector AND NDE Guru

6.4.1.2

Question 12

Determine internal interval based on tank bottom corrosion

Answer 12

Owner

6.4.2.3

Question 13

Determine internal interval based on RBI

Answer 13

Owner

6.4.2.4

Question 14

Conduct an RBI assessment

Answer 14

RBI Guru

6.4.2.4

Question 15

Review and approve RBI assessments

Answer 15

Inspector AND Engineer

6.4.2.4

Question 16

Maintain tank records

Answer 16

Owner

6.8.1

Question 17

Review inspection findings and recommendations

Answer 17

Owner

6.9.3.2

Question 18

Ensure disposition of all recommended repairs and monitoring

Answer 18

Owner

6.9.3.2

Question 19

Evaluate and accept NDE examination results

Answer 19

Inspector

6.10

Question 20

Authorize all repairs

Answer 20

Inspector Or Engineer

9.1.3

Question 21

Authorize all alterations

Answer 21

Engineer

9.1.3

Question 22

Designate inspection hold points for repairs, alterations & reconstructions

Answer 22

Inspector

9.1.3

Question 23

Provide general authorization for limited routine repairs

Answer 23

Inspector

9.1.3

Question 24

Approve all proposed methods of design, materials, WPSs, NDE & testing

Answer 24

Inspector Or Engineer

9.1.4

Question 25

Approve all repair, alteration and reconstruction work at hold points

Answer 25

Inspector Or Engineer

9.1.4

Question 26

Approve all repair, alteration & reconstruction work at completion of work

Answer 26

Inspector Or Engineer

9.1.4

Question 27

Review and approve the use of non-code specified lap patches on bottom

Answer 27

Engineer

9.10.1.3

Question 28

Approve lap patch in critical zone if bottom thickness is less than 0.100”

Answer 28

Engineer

9.10.1.6.b

Question 29

Run the hot tap machine

Answer 29

Qualified Operator

9.14.5.4

Question 30

Autorize all reconstruction work

Answer 30

Inspector Or Engineer

10.1.3

Question 31

Review the use of Preheat or Controlled Deposition welding in lieu of PWHT

Answer 31

Engineer

11.3

Question 32

Concur in writing use of Controlled Dep. welding for malt’s of unknown

Answer 32

Engineer And Owner

11.3

Question 33

Review & approve exempting a hydrotest after a major repair or alteration

Answer 33

Engineer And Owner

13.3.2.2

Question 34

Authorize FFS evaluation to exempt hydro after major repair or alteration

Answer 34

Owner

12.3.2.7

Question 35

Perform FFS evaluation to exempt hydro after major repair or alteration

Answer 35

Engineer

12.3.2.7

Question 36

Perform tank settlement survey

Answer 36

Experienced Person

b.2.1