Test 4 Flashcards
Which of the following a spot type smoke detector?
A. Temperature rise
B. Photoelectric
C. Projected beam
C. Infrared
B. Photoelectric
Which part of the set up acts as an insulator when conducting the critical radiant flux factor covering systems test?
A. Wall
B. Floor
C. Underlaying
D. Carper
C. Underlaying
Which flame spread test uses a small sample size relative to other tests?
A. Approvals corner test
B. Steiner tunnel test
C. Radiant panel test
D. Radiant flux test
C. Radiant panel test
When what temperature is reached in the thermocouples peened into columns, will the column fail the fire resistance testing?
A. 1,100 degrees Fahrenheit
B. 1,300 degrees Fahrenheit
C. 1,550 degrees Fahrenheit
D. 1,000 degrees Fahrenheit
B. 1,300 degrees Fahrenheit
What material should the caps used on FDC be made from?
A. Glass
B. Plastic
C. Copper
D. Steel
B. Plastic
In which type of sprinkler system will water flow from all of the heads on the piping system?
A. Wet pipe
B. Dry pipe
C. Preaction
D. Deluge
C. Deluge
In the past, in what type of buildings were automatic sprinkler systems almost exclusively seen in?
A. Government
B. Civilian
C. High rise
D. Factory
D. Factory
Which fire protection system is used for flammable liquid tank protection?
A. Water mist systems
B. Carbon dioxide systems
C. Foam systems
D. Wet chemical systems
C. Foam Systems
Which statement is NOT correct?
A. Sprinklers have a number of opportunities to fail properly perform in a high rack storage warehouse
B. All of the glass fire barriers must be wet
C. ESFR sprinklers were designed to suppress the fire
D. Wetting of glass fire barriers must be delayed during a fire
D. Wetting of glass fire barriers must be delayed during a fire
Which standpipe system is connected to a small water supply but cannot deliver the system demand attached to the system?
A. Manual wet
B. Manual dry
C. Automatic wet
D. Semiautomatic dry
A. Manual wet
Which of the following would be considered an informal action taken when a fire sprinkler is out of service?
A. Accepting alternate methods
B. Seeking cooperation of a licensing agency
C. Modifying prefire plans
D. Shutting down a department store
C. Modifying prefire plans
How many sprinkler heads are anticipated needing to be operated in a residence?
A. 8
B. 4
C. 10
D. 6
B. 4
What class of foam is recommended during overhaul in an attic?
A. D
B. B
C. C
D. A
D. A
What fire resistance rating is usually given to fire walls?
A. 1 1/2 hour
B. 2 hour
C. 1 hour
D. 1/2 hour
C. 1 hour
Which of the following is code incentive for installing sprinkler systems?
A. Fewer hydrants with greater spacing
B. Interior wall, ceiling, and floor finishes
C. Street width reduction
D. Property tax rebates
B. Interior wall, ceiling, and floor finishes
What is the term fire resistance rating used to describe?
A. Paneling
B. Wall
C. Structural member
D. Contents
B. Wall
Who should replace sprinklers or rest the dry pipe valves once the fire is out?
A. Building owner
B. Occupants
C. Firefighters
D. Contractor
D. Contractor
Which statement is NOT correct about sprinkler systems?
A. Sometimes open outside sprinklers all discharge when a valve is opened manually
B. Exposure protection is sometimes provided by sprinklers outside
C. A flat plate is used to conceal the sprinkler heads
D. Spray fireproofing can be applied to the heads
D. Spray fireproofing can be applied to the heads
What is the structural members resistance to collapse due to materials or assembly?
A. Inherent fire retardant
B. Fire retardant rating
C. Fire resistance rating
D. Inherent fire resistance
D. Inherent fire resistance
What statement is correct about shutting down the sprinkler system?
A. Do not shut it down until overhaul is complete
B. Shut it down when the building manager decides
C. Shut it down once crews arrive on scene
D. Do not shut it down if hot water is falling down
D. Do not shut it down if hot water is falling down