Show Me, Tell Me - Tyres and lights Flashcards
Tell me how you would check the types to ensure they have suffice not tread depth and that their general condition is safe to use on the road
No cuts or bulges. 1.6mm tread depth across the central 3/4 of the breadth of the tyre and around the entire circumference.
Show me how you would check that the direction indicators are working
Apply the hazard lights and check functioning of all indicators. May need to switch the ignition on.
Show me how you would check that the brake lights are working on this car. I an assist you. If you need to switch the ignition on, please do not start the engine.
Operate foot brake, make use of reflections in windows etc… Or ask someone to help. May need to switch the ignition on.
Tell me where you would check if the headlights and tail lights are working. There is no need to exit the vehicle.
Explain that the need to operate switch, turning ignition on if necessary, then walk around the vehicle to check.
Show me how you would switch on the rear fog lights and explain when you would use them
Operate switch. Turn on dipped headlights and ignition if necessary. Check warning light is on. Explain that you would them where visibility is seriously reduced to less than 100m remembering to switch them off when visibility improves.
Show me how you would switch your headlights from dipped to main beam. How would you know the main beam is on whilst inside the car?
Operate switch, with ignition if necessary. Check the main beam warning light.
Tell me where you would find the information for recommended tyre pressures for this car and how tyre pressure can be checked
Manufacturers guide. Use a reliable reassure gauge. Check and adjust pressured while tyres are cold. Don’t forget the spare tyre. Refit valve caps.
