OP-Z 13. Sampling

Question 1

to create a new user sample pack.

Answer 1

hold track together with an empty slot 1-0 to create a new user sample pack.

Question 2

to remove a sample pack.

Answer 2

hold track together with an existing user slot 1-0 for three seconds to remove a sample pack.

Question 3

to enter sample mode.

Answer 3

press and hold stop + rec to enter sample mode. this is where you record and tweak your samples.

Question 4

to exit and return to normal operation.

Answer 4

press stop while in sample mode to exit and return to normal operation.

Question 5

input source on or off.

Answer 5

press play to toggle previewing of the active input source on or off.

Question 6

toggle test tone

Answer 6

press track to toggle a test tone of 440 hz on or off. this corresponds to the middle A note and can be used as a tuning reference when sampling.

Question 7

adjust the volume of the test tone

Answer 7

adjust the volume of the test tone by pressing and holding track while turning the green dial.

Question 8

to adjust input gain.

Answer 8

press and hold shift and press the top track buttons 1 - 16 to adjust input gain.
button 4 (sample track) corresponds to 0 db.

Question 9

to start recording

Answer 9

press and hold rec to start recording from the active input source. release rec to stop recording.

Question 10

to adjust sample start

Answer 10

turn the green dial to adjust sample start for the active slice.

turn the green dial to adjust the sample start position.

Question 11

to adjust sample end

Answer 11

turn the blue dial to adjust sample end for the active slice.

turn the blue dial to adjust the sample end position.

Question 12

to adjust the pitch of the sample

Answer 12

turn the yellow dial to adjust the pitch of the sample for the active slice.

turn the yellow dial to adjust the pitch of the sample.

Question 13

to adjust sample gain

Answer 13

turn the red dial to adjust sample gain for the active slice.

turn the red dial to adjust the sample gain.

Question 14

to adjust sample playback direction

Answer 14

after pressing shift you can turn the yellow dial to adjust sample playback direction for the active slice: normal or reversed.

Question 15

to adjust playmode for the slice between gate, trigger or loop.

Answer 15

also while on the second parameter page, turn the red dial to adjust playmode for the slice between gate, trigger or loop.

Question 16

to adjust the pitch in half note steps

Answer 16

press – or + to adjust the pitch in half note steps for the active slice.

Question 17

to copy a slice

Answer 17

press and hold shift and press any note to copy a slice from the active note position to the pressed one.

Question 18

press shift to access the secondary parameter page (yellow leds):

to adjust the sample loop in position.

Answer 18

turn the green dial to adjust the sample loop in position.

Question 19

press shift to access the secondary parameter page (yellow leds):

to adjust the sample loop out position.

Answer 19

turn the blue dial to adjust the sample loop out position.

Question 20

press shift to access the secondary parameter page (yellow leds):

to adjust playback direction

Answer 20

turn the yellow dial to adjust playback direction: normal or reversed.

Question 21

press shift to access the secondary parameter page (yellow leds):

to adjust the pitch

Answer 21

press – or + to adjust the pitch in half note steps.