NCCER introduction to hand tools Flashcards
The type of hammer that is primarily used in metalworking it the _____?
Ball Peen Hammer
____? Chisels are Designed for Hard Materials such as steel and stone
Cold
The Screwdriver that provides the least amount of grip on the screw head is the ____?
Slotted
_____? Wrenches are used to tighten and loosen threaded pipe.
Pipe Wrench
Side Cutters are also known as _____?
Lineman’s Pliers
Folding rulers with metric markings come in ____?
1-m and 2-m Models
A laser measuring tool is a battery-powered, electronic version of a _____?
Tape measure
The ability to take long vertical measurements from the ground is an advantage of _____?
Laser measuring tool
The framing square is also called a _____?
Carpenter Square
_____? are used to mark long, straight lines on smooth surfaces.
Chalk lines
A _____? is used for cutting finish lumber and miter joints.
Backsaw
Which type of clamp is designed to release material quickly by squeezing a release trigger?
Bar clamp
Which of the following file types would leave the roughest finish?
A Rough File
Which tool is best for clearing tree roots?
Mattock
Which tool is best for collecting debris from a hard surface, or for moving sand and gravel?
Square Shovel
Another name for a Machinist Hammer is ____?
Ball-Peen Hammer.
A type of screw with a six-pointed star-shaped head?
Torx Screw
Which Wrench has Loops at each end?
Box-End wrench
Which Pliers are used to get into narrow places where other Pliers cannot reach?
Long nosed Pliers
Characteristics of a pipe clamp?
is a Length of a pipe for a spine
How do traditional spade differ from round and square shovels?
is flatter and without curved sides.
Which Pliers has an oval shaped head with flat gripping jaws at the nose tip?
Linesman’s Pliers
What are three special markings on a folding rule?
16” 19.2”24”
When sawing lumber, where should the kerf be when beginning the cut?
On the scrap side of the marked line.
One situation that can make a measurement with a laser inaccurate is measuring to a ____?
Reflective surface.
When an object is plumb it is___?
Perfectly vertical
The concave shape of a tape measure is designed to___?
Strengthen the blade when extended.
Which saw would have fewer teeth per inch resulting in the largest and most aggressive teeth?
Coping saw.
The best saw for cutting miter joints is the?
Backsaw
which clamp can spread clamping pressure over a wider area than the others?
A Hand-Screw Clamp.
