Mannequins W/ Flashcards
PLAY (while in NAV mode)
top LEDs: orange + white
LIVE
LIVE Buttons
transport
double speed
play + ▲
LIVE Buttons
transport
half speed
play + ▼
LIVE Buttons
transport
toggle loop
loop
LIVE Buttons
transport (while playing)
start overdub recording
record
LIVE Buttons
transport (while playing)
start overwrite recording
record + ▼
LIVE Buttons
transport (while recording)
stop recording
record
LIVE Buttons
transport (while recording)
toggle overdub/overwrite
record + ▼
LIVE Buttons
cues
add a cue
▼
LIVE Buttons
cues
add a cue and start looping
▲
LIVE Buttons
cues
add a cue and record
loop + record
LIVE Buttons
cues
go to next cue
loop + ▲
LIVE Buttons
cues
go to previous cue
loop + ▼
LIVE Buttons
switch modes
switch to NAV mode
play
LIVE Buttons
switch modes
switch to GLOBAL mode
record (hold)
LIVE CV Control
transport [cues and speed (identical to NAV) select with ▲]
input: -5v to +5v
when playhead reaches a cue point, jumps to the cue indicated by THIS voltage — all cue points are evenly distributed
THIS
LIVE CV Control
transport [cues and speed (identical to NAV) select with ▲]
input: -5v to +5v
tape speed — fast backwards (-5v) to fast forwards (+5v)
THAT
LIVE CV Control
dub [toggle recording and level (default) select with play]
input: trigger
toggle recording (punch in/out)
THIS
LIVE CV Control
dub [toggle recording and level (default) select with play]
(while playing)
input: 0 to -5v
playback level (-5v is quieter)
THAT
LIVE CV Control
dub [toggle recording and level (default) select with play]
(while recording)
input: 0 to -5v
overdub (0v) to overwrite (-5v) — previous material not heard
input: 0 to +5v
overdub (0v) to overwrite (5v) — previous material is heard
THAT
LIVE CV Control
signal [location ramp output and boundry trigger select with loop]
output: -5v to +5v
outputs voltage according to loop position (-5V start to +5v end)
THIS
LIVE CV Control
signal [location ramp output and boundry trigger select with loop]
output: trigger
sends a trigger whenever the play head hits a cue point
THAT
LIVE CV Control
caption [record CV select with record]
input: -5v to +5v
CV to be recorded
THIS
LIVE CV Control
caption [record CV select with record]
output: -5v to +5v
recorded CV output
THAT
LIVE CV Control
sample [jump cues and v/octave pitch shift (similar to CUE) select with ▼]
input: trigger
go to the most recently passed cue immediately — attaching a parallel static voltage (-1V to 1V) allows it to jump forward or backward by a single cue
THIS
LIVE CV Control
sample [jump cues and v/octave pitch shift (similar to CUE) select with ▼]
input: -5v to +5v
v/octave tape speed
THAT
LIVE LEDs
w/ (top)
blinks at cue boundries
orange + white
LIVE LEDs
loop
not looping - past last cue point
all off
LIVE LEDs
loop
looping — brightness indicates current loop position
orange + white
LIVE LEDs
loop
not looping — brightness indicates current position between cues
orange to white
LIVE LEDs
play
dub, caption, signal, and caption
playing
white
LIVE LEDs
play
transport
tape speed — fast backwards (orange) to fast forwards (white)
orange to white
LIVE LEDs
play
sample
v/octave tape speed - dimmer is slower
white
LIVE LEDs
record
not recording
all off
LIVE LEDs
record
recording in overdub mode
white
LIVE LEDs
record
recording in overwrite mode
orange + white
LIVE LEDs
record
dub mode, with cable into THAT
not recording
orange