Flight Parameters Flashcards
During approach, when does PM call “SPEED”?
-5 kts and +10 kts of target speed
During approach, when does PM call “SINK RATE”?
When ROD exceeds 1000 ft/min
During approach, when does PM call “BANK”?
When the bank angle is greater than 7 degrees
During approach, when does PM call “PITCH”?
When pitch attitude is lower than -2.5 degrees and higher than +10 degrees (A319, A320) or 7.5 degrees (A321)
During approach, when does PM call “LOC” or “GLIDE”?
Respective half dot deflection
During approach, when does PM call “CROSS TRACK”?
When the XTK is greater than 0.1nm
During approach, when does PM call “V/DEV”?
When the vertical deviation is greater than half dot
During approach, when does PM call “COURSE”?
When greater than half dot or 2.5 degrees (VOR) or 5 degrees (ADF)
On landing, when would the PM call “PITCH PITCH”?
When the pitch approaches the tail strike pitch limit indicator or reaches 10 degrees (A319, A320) or 7.5 degrees (A321)
On landing, when would the PM call “BANK BANK”?
When the bank angle reaches 7 degrees
During the go-around, when would the PM call “BANK”?
When the bank angle becomes greater than 7 degrees
During the go-around, when would the PM call “PITCH”?
When the pitch becomes greater than 20 degrees or less than 10 degrees
During the go-around, when would the PM call “SINK RATE”?
When there is no climb rate
