Ch 8 C/N/Detailed

Question 1

Start abort criteria

Answer 1

In 45 Seconds
No TGT Increase
No ENG OIL PRESS
No %RPM 1/2/R

ENG STARTER drop out prior to 52%
TGT 851 or higher

Question 2

Caution < 1hr after shutdown

Answer 2

Motor starter for 60 seconds before advancing to idle.

Question 3

Engine start switch actuator

Answer 3

To avoid damage do not move from idle to off while pressing starter button.

Question 4

Caution: ENG STRT/RUNUP cyclic position

Answer 4

During Engine start and runup, ensure that the cyclic is kept neutral, collective raised no more than 1 inch above full down and pedals centered until % RPM R reaches 50% to prevent damage to anti-flap brackets.