AFCS Flashcards
The AFCS consists of?
AP, FD
On power up what is the default selection on the Autopilot Control Panel?
ATT
The AP Test requires what to be done first?
Both AP off
Whenever you press an FD button (HDG, ALT etc) is it coupled?
Yes. It is Automatically coupled
What difference is there when using the SAS release on the cyclic rather than AP control Panel?
Actuators are not automatically recentred (as they are when using the APCP)
What are the requirements for the AP Test?
- On Ground 2. Both AP off 3. Full hydraulic power (207 bar / 3000 psi)
Which AP is the Trim Master?
The first AP engaged
When is the cyclic indicator in view?
On Ground, Collective fully down
Except RHT, ALT and HOV all other FD modes need what minimum speed to engage?
60 KTS
Below what speed do the FD modes disengage (except RHT, ALT + HOV)?
55 KTS
What is the minimum speed required to engage DCL Mode?
60 Kts
What is GA mode?
Go Around
Where is the GA button accessed?
On the Collective (Red button)
What 3 actions does the GA mode initiate?
- Collective - climbs with v/s of 1000 ft/m
- Power - maintains 80 Kts IAS
- Roll - it levels the wings
Minimum speed to engage GA mode?
60 Kts
